金属学报  1986, Vol. 22 Issue (6): 36-40

论文 本期目录 | 过刊浏览 |

临界区热处理对12Ni4CrMo马氏体钢显微结构的影响

宋诚一;沈蕴华;张光中;吴光大

冶金工业部钢铁研究总院;冶金工业部钢铁研究总院;冶金工业部钢铁研究总院;冶金工业部钢铁研究总院

EFFECT OF INTERCRITICAL HEAT TREATMENT ON MICROSTRUCTURE OF MARTENSITIC STEEL 12Ni4CrMo

by SONG Chengyi; SHEN Yunhua; ZHANG Guangzhong; WU Guangda (Central Iron and Steel Research Institute; Ministry of Metallurgical Industry; Beijing)

宋诚一;沈蕴华;张光中;吴光大. 临界区热处理对12Ni4CrMo马氏体钢显微结构的影响[J]. 金属学报, 1986, 22(6): 36-40.
, , , . EFFECT OF INTERCRITICAL HEAT TREATMENT ON MICROSTRUCTURE OF MARTENSITIC STEEL 12Ni4CrMo[J]. Acta Metall Sin, 1986, 22(6): 36-40.

摘要 参考文献 相关文章 Metrics 全文: PDF(1943 KB)   摘要: <正> 本文借助透射电镜与扫描电镜,分析了12Ni4CrMo钢于临界区热处理后显微结构的特征,并探讨显微结构的变化与改善韧性的关系。 一、试验方法 试验用钢的化学成分(wt-％)及临界点(℃)如下 C Ni Cr Mo Mn Si P S AC_1 Ac_3 0.12 4.25 1.38 0.43 0.77 0.25 0.012 0.008 670 790 钢经900℃正火后按下列工艺分别进行热处理:(1)临界区热处理:860℃ 1h, Abstract：TEM and SEM studies were carried out on the low carbon martensitic steel 12Ni4CrMo undergone intercritical heat treatment. The influence of the quenching temperature between A_(c_1)—A_(c_3) on the morphology, phase constitution as well as -196℃ CVN toughness were analyzed in comparison with the steel conventionally treated. It is suggested that the effective grain refinement, the configuration of zigzag prior austenite grain boundary and the suitable substructure are the important microstructural characteristics of the intercritically treated steel. These seem to be the main factors contributing to the optimum toughness. 收稿日期: 1986-06-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 宋诚一 沈蕴华 张光中 吴光大 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1986/V22/I6/36 1 Kim, J.I.; Syn, C.K.; Morris, J.W. Jr., Metall. Trans., 14A(1983) , 93． 2 Matsuda, S.; Inoue, T.; Ogasawara, M., Trans. Jpn. Inst. Met., 9(1968) , 343． 3 大谷泰夫;寺崎富文长;邦武立郎,铁钢,58(1972) ,434。 No related articles found! Viewed Full text Abstract Cited   Shared      Discussed