Please wait a minute...
金属学报  1984, Vol. 20 Issue (6): 416-494    
  论文 本期目录 | 过刊浏览 |
热轧硅钢中碳化物的分解与析出
罗阳;马黛;苏秀锦;李岫梅;孙立;王振琴
冶金工业部钢铁研究总院;冶金工业部钢铁研究总院;冶金工业部钢铁研究总院;冶金工业部钢铁研究总院;冶金工业部钢铁研究总院;冶金工业部钢铁研究总院
DECOMPOSITION AND PRECIPITATION OF CARBIDES IN HOT-ROLLED Si-Fe SHEETS
LUO Yang; MA Dai; SU Xiujin; LI Xiumei; SUN Li; WANG Zhengin (Central Iron and Steel Research Institute; Ministry of Metallurgical Industry; Beijing) (Manuscript received 11 October; 1983; revised manuscript 27 December; 1983)
引用本文:

罗阳;马黛;苏秀锦;李岫梅;孙立;王振琴. 热轧硅钢中碳化物的分解与析出[J]. 金属学报, 1984, 20(6): 416-494.
, , , , , . DECOMPOSITION AND PRECIPITATION OF CARBIDES IN HOT-ROLLED Si-Fe SHEETS[J]. Acta Metall Sin, 1984, 20(6): 416-494.

全文: PDF(2030 KB)  
摘要: 在高温金相显微镜下,直接观察碳化物在热轧硅钢中的分解与析出过程。指出冷却速度对碳化物析出形态有很大影响。用差热分析确定了碳化物的分解与析出温度。所得结果为改进热轧硅钢生产工艺提供了重要的依据。
Abstract:The decomposition and precipitation of carbides in the hot-rolled Si-Fe sheets were studied by means of both high temperature metallography and differential thermal analysis. It has been found that the decomposition during heating and the precipitation during cooling start from 720 and 750℃ respectively. The shape and distribution of the precipitated carbides are markedly influenced by the cooling rate of the sheets after hot-rolling. If the cooling rate is high enough, saying up to 100℃/min, the carbides would be precipitated dispersely; while it slows down to about 1℃/min, they would be aggregated coarsely. The shape and distribution of the precipitated carbides are dependent on the efficiency of decarburization. In other words, the more disperse the carbide is, the more effective the decarburization will be. The results may provide leads for further improvement on the technology for hot-rolling Si-Fe sheet production.
收稿日期: 1984-06-18     
1 上海硅钢片厂,热轧硅钢片生产工艺改革,未发表资料,1980.
2 罗阳;马黛,钢铁18(1983) ,No.4,52.
3 Kissinger, H. E., Ann. Chem., 29 (1957) , 1702.
4 Luo, Y.; Zhang, B.C.; Zhou, X. Y.; Ma, H. L., IEEE Trans. Magn., MAG-16 (1980) , 740.
5 罗阳;张百成;马鸿良;周秀缓,金属学报,16(1980) ,38.
No related articles found!