Please wait a minute...
金属学报  1984, Vol. 20 Issue (3): 252-260    
  论文 本期目录 | 过刊浏览 |
连铸坯凝固冷却过程的控制
蔡开科;刘凤荣
北京钢铁学院;河北矿冶学院
CONTROL OF SOLIDIFICATION PROCESS DURING CONTINUOUS CASTING OF STEEL
CAI Kaike (Beijing University of Iron and Steel Technology) LIU Fengrong (Hebei Institute of Mining and Metallurgy) (Manuscript received 18 September; 1982; revised manuscript 14 March; 1983)
引用本文:

蔡开科;刘凤荣. 连铸坯凝固冷却过程的控制[J]. 金属学报, 1984, 20(3): 252-260.
, . CONTROL OF SOLIDIFICATION PROCESS DURING CONTINUOUS CASTING OF STEEL[J]. Acta Metall Sin, 1984, 20(3): 252-260.

全文: PDF(613 KB)  
摘要: 本文论述了连铸坯凝固冷却过程的“冶金标准”。用数学模型从理论上计算了操作参数如拉速、比水量、二冷区水量分布、钢水过热度、液相穴内钢水对流运动和二冷水温度等对连铸坯凝固“冶金标准”的影响。根据计算结果,整理出坯厚、拉速、比水量、液相穴深度和生产率的关系图,这有利于选择合理工艺参数,科学地控制操作。
Abstract:An investigation has been carried out into the "metallurgical criterion" of the slab solidification during continuous casting. The effect of following variables on the metallurgical criterion has been studied by the mathematical model of heat transfer: casting speed, spray water intensity, water distribution in spray zone, superheat in tundish, convection in liquid pool and temperature of spray water. Considering these factors, a nomogram of the productivity related to slab thickness, casting speed, spray water intensity and depth of liquid pool was prepared so as to selecte reasonably the technological parameters and to control scientifically the operation.
收稿日期: 1984-03-18     
1 Birat, J. P.; Larrecq, M.; Le Bon, A.; Jeanneau, M.; Poupon, M.; Senaneuch, D., Rev. Metall. (Paris), 79 (1982) , 29.
2 Lair, J. E.; Brimacombc, J. K.; Weinberg, F., Ironmaking Steelmaking, 1 (1974) , № 2, 90.
3 Mizikar, E.A., Trans. Metall. Soc. AIME, 239 (1967) , 1747.
4 Gautier, J. J.; Morillon, Y.; Dumont-fillon, J., J. Iron Steel Inst., 208 (1970) , 1053.
5 Perroy, A., Modéle de Simulation Mathématique de la Coulée Continue, Rapport IRSID, REP. 189, Décembre 1976, Personal Communication.
6 板岡隆;石黑守幸;铁钢凝固,铁钢基础共同会出版,p.199.
7 Fogleman, E. L., J. Met., 26 (1974) , № 10, 31.
No related articles found!