金属学报  1982, Vol. 18 Issue (6): 755-762

论文 本期目录 | 过刊浏览 |

连轧张力方程适用范围的分析讨论

张进之

冶金工业部钢铁研究总院

DISCUSSION ON APPLICABILITY OF TENSION EQUATION IN CONTINUOUS ROLLING

Zhang Jinzhi (Central Iron and Steel Research Institute; Ministry of Metallurgical Industry; Beijing)

张进之. 连轧张力方程适用范围的分析讨论[J]. 金属学报, 1982, 18(6): 755-762.
. DISCUSSION ON APPLICABILITY OF TENSION EQUATION IN CONTINUOUS ROLLING[J]. Acta Metall Sin, 1982, 18(6): 755-762.

摘要 参考文献 相关文章 Metrics 全文: PDF(584 KB)   摘要: 本文对文献[2]提出的常用张力微分方程不适应于动态过渡历程计算及其基本论点进行了分析论证,指出其论点是不成立的,证明了常用的张力微分方程适用于张力小于弹性限的全部连轧情况,计算误差仅产生于忽略(1+σ/E)项。对文献[2]的其它论点也进行了分析讨论。 张力微分方程的解析解不仅能清晰地描述连轧过程的物理本质,而且提高了连轧动态模拟计算精度和减少了计算量。常用张力微分方程与总张力平衡方程式联立,推导出适用于动态变规格和穿带过程的离散型张力公式: Abstract：An analysis and discussion were made of the evidence whether the conventional differential equation is proper to calculate the dynamic transition process. It has been proved that the equation is applicable to all continuous rolling conditions of tension less than the elastic limit, however, the error may only be introduced by the neglected term (1+σ/E). The analytical solution of the equation gives not only clarifying the physical nature of rolling practice but also improving the accuracy and amount of the dynamic analogue calculation. Combining the aforementioned conventional differential equation with the balance equation of total tension, a discrete tension formula is then derived for dynamic guage change and strip threading procedure. 收稿日期: 1982-06-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 张进之 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1982/V18/I6/755 1 张进之,钢铁,13(1978) ,№4,85． 2 张树堂;刘玉荣,钢铁,14(1979) ,№2,45． 3 张树堂;刘玉荣,金属学报,17(1981) ,206． 4 张树堂;刘玉荣,钢铁,15(1980) ,№6,34． 5 张进之,金属学报,14(1978) ,127． 6 张永光;梁国平;张进之;郑学铎,自动化学报,5(1979) ,177． 7 Bryant, G. F.; Higham, J. D,, Digital Computer Applications to Process Control. 3． , Proceedings of the Third International Conference, Ed. W. E. Miller; A. Niemi, Instrument Society of America, Pittsburgh, 1971, p. X-4． 8 有村透;鎌田正诚;斎藤森生;塑性加工,10(1969) ,29． 9 原田利夫;中岛浩卫;岸川宫一;中俣伸一;渡辺和夫;山本洋春;塑性加工,16(1975) ,60． 10 浅川基男;近藤勝也;绪方俊治;美坂佳助;松井利光;塑性加工,20(1979) ,841． 11 张进之,连轧张力系统定常性质的论证,1979(待发表). 12 田沼正也;大成幹彦,塑性加工,13(1972) ,122． 13 阿高松男;铃木弘,塑性加工,11(1970) ,676． 14 小西正躬;铃木弘,塑性加工,13(1972) ,689． 15 黄光远,自动化学报,6(1980) ,209． 16 郑学铎;张进之,未发表资料. 17 张进之;郑学铎;梁国平,钢铁,14(1979) ,№6,60 No related articles found! Viewed Full text Abstract Cited   Shared      Discussed