Please wait a minute...
金属学报  1980, Vol. 16 Issue (4): 470-479    
  论文 本期目录 | 过刊浏览 |
二辊斜轧穿孔时圆坯断面的变形分布和发展
卢于逑;王先进
北京钢铁学院;北京钢铁学院
THE DISTRIBUTION OF DEFORMATION IN TUBE ROUNDS DURING MANNESMANN PIERCING
Lu Yuqiu;Wang Xianjin Beijing Institute of Iron and Steel Technology
引用本文:

卢于逑;王先进. 二辊斜轧穿孔时圆坯断面的变形分布和发展[J]. 金属学报, 1980, 16(4): 470-479.
, . THE DISTRIBUTION OF DEFORMATION IN TUBE ROUNDS DURING MANNESMANN PIERCING[J]. Acta Metall Sin, 1980, 16(4): 470-479.

全文: PDF(1526 KB)  
摘要: 为了分析二辊斜轧穿孔时中心金属的变形和裂断机理,确立穿孔变形的工艺实质.研究了圆坯斜轧时断面上变形的分布.采用反映二辊斜轧变形特点的合理研究方法,通过实验确立了沿断面直径上变形强度呈W形分布并不断加剧的规律,即: 1.沿圆坯断面上变形强度的分布是不均匀的,呈W形.边缘层和中心层的变形强度比过渡层为大. 2.随直径压下量增加,其不均匀性不断加剧. 3.孔腔形成前,中心金属业已发生明显的塑性变形.孔腔开裂属韧性断裂. 4.采用不同试验方法所得结论相似.
Abstract:The distribution of deformation in the section of tube rounds during Man-nesmann piercing has been experimentally studied with a view to establishing itsmechanism. It was shown: 1. The distribution of the intensity of strain across the diameter of a tuberound is inhomogeneous with W-shaped. The intensity of strain on the sur-face layer and centre layer is stronger than that on the intermediate layer. 2. Its inhomogeneity increases during the process. 3. Distinct deformation at the centre of the tube rounds has taken place be-fore the cavity occurs, so that the fracture is tough. 4. It is proved that the results obtained by adopting three experimental meth-ods are very alike.
收稿日期: 1980-04-18     
[1] Seibel, E., Stahl Eisen, 47 (1927) , 1685.
[2] Kocks, F., Stahl Eisen, 47 (1927) , 433.
[3] #12
[4] #12
[5] #12
[6] #12
[7] #12
[8] #12
[9] 王先进,斜轧穿孔时金属的变形--断裂机构,北京钢铁学院研究生毕业论文,1963.
[10] 卢于逑,王先进,朱景清,胡文耀,用硬度测定法研究料轧过程中金属的变形分布,中国金属学会压力加工学术会议报告,1962.
[11] 卢于逑,王先进,斜轧穿孔过程中应力和变形的分布和中心金属断裂机构的某些特点分析,北京钢铁学院研究生专题论文,1963.
[12] 张作梅,黎俊结,金属学报,7(1964) ,43.
[13] 加藤健三,第23回塑性加工连合讲演论文集,北九州,1972,p.237.
[14] #12
[15] #1
No related articles found!