金属学报  1980, Vol. 16 Issue (3): 318-324

论文 本期目录 | 过刊浏览 |

确定斜轧辊形曲面的包络法——与《斜轧辊形设计中的数学方法》一文商榷

马香峰

北京钢铁学院

THE ENVELOPING METHOD OF DETERMINING CROSS ROLLER SHAPE——A Discussion on "A Mathematical Treatment on Cross Roller Design"

Ma Xiangfeng Beijing Institute of Iron and Steel Technology

马香峰. 确定斜轧辊形曲面的包络法——与《斜轧辊形设计中的数学方法》一文商榷[J]. 金属学报, 1980, 16(3): 318-324.
. THE ENVELOPING METHOD OF DETERMINING CROSS ROLLER SHAPE——A Discussion on "A Mathematical Treatment on Cross Roller Design"[J]. Acta Metall Sin, 1980, 16(3): 318-324.

摘要 参考文献 相关文章 Metrics 全文: PDF(519 KB)   摘要: 根据斜轧生产实践,将运动着的轧件与轧辊的相互关系,看作母面和包络面的关系,从而导出了通用的辊形曲面方程式,它既适用于螺旋辊斜轧辊形的设计计算,也适用于回转辊斜轧辊形的设计计算. Abstract：According to practices, a general equation for the determination of the crossroller shape has been derived on the basis of the mutual relation between movingstocks and rollers which is further considered as the relation between generatingand enveloping surfaces. It appears that this is applicable to the designing calcula-tion of cross roller shapes with either helical or revolving surfaces. 收稿日期: 1980-03-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 马香峰 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1980/V16/I3/318 [1] 陈惠波,金属学报,15(1979) ,23． [2] 马香峰,确定回转面的投影条件及其在斜矫、斜轧方面的应用,画法几何及制图科学论文选编,1965． [3] 马香峰,包络面平面剖线的图解解析方法及其应用,工程图学武汉报告会论文,1979,4． [4] 马香峰,斜轧辊形曲面的理论分析,北京机械工程学会年会论文选集,1979． [5] #12 No related articles found! Viewed Full text Abstract Cited   Shared      Discussed