金属学报  1978, Vol. 14 Issue (1): 27-111

论文 本期目录 | 过刊浏览 |

锑白白度研究

鲍超;黄际商

长沙矿冶研究所;长沙矿冶研究所

ON FACTORS CONTROLLING THE QUALITY OF ANTIMONY WHITE PIGMENT

Bao Chao(Pao Chao) Huang Ji-shang (Changsha Institute of Mining and Metallurgy Research)

鲍超;黄际商. 锑白白度研究[J]. 金属学报, 1978, 14(1): 27-111.
, . ON FACTORS CONTROLLING THE QUALITY OF ANTIMONY WHITE PIGMENT[J]. Acta Metall Sin, 1978, 14(1): 27-111.

摘要 参考文献 相关文章 Metrics 全文: PDF(2040 KB)   摘要: 本文报道了杂质元素、颗粒形状和大小、晶型结构等对锑白产品白度的影响。实验证明影响锑白白度的关键因素是晶型结构。并介绍了在生产实践上,锑白炉中控制适当的一次风、二次风、冷却风和反应室温度等工艺条件,可以获得高白度产品。 Abstract：Antimony white as a pigment is mainly judged by the degree of whiteness. With a view to improving the quality of the product, tests were carried out to investigate the effect of impurities contamination, the shape and size of the grains, and the crystal structure of antimony oxides. At the same time, methods of producing superfine antimony white on a large scale were also investigated. It was found that amongst the many factors the crystal structure of the grains was most important, thus the greater the amount of cubic antimony trioxide present, the better the quality of antimony white as revealed by its whiteness. Furthermore, long-time tests on a large scale showed that the best quality of antimony white powders could be obtained by suitable control of the primary and secondary oxidizing blast, the forced-air cooling flow, and the reaction chamber temperature. 收稿日期: 1978-01-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 鲍超 黄际商 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1978/V14/I1/27 No related articles found! Viewed Full text Abstract Cited   Shared      Discussed