金属学报  1977, Vol. 13 Issue (z1): 109-172

论文 本期目录 | 过刊浏览 |

高碳铬轴承钢钢锭解剖

No Author

大冶钢厂钢铁研究所

AN INVESTIGATION OF CERTAIN HIGH CARBON CHROMIUM BEARING STEEL INGOTS

Research Institute of Tayeh Steel Works

No Author. 高碳铬轴承钢钢锭解剖[J]. 金属学报, 1977, 13(z1): 109-172.
. AN INVESTIGATION OF CERTAIN HIGH CARBON CHROMIUM BEARING STEEL INGOTS[J]. Acta Metall Sin, 1977, 13(z1): 109-172.

摘要 参考文献 相关文章 Metrics 全文: PDF(10258 KB)   摘要: 解剖了九个按不同冶炼铸锭工艺方法生产的高碳铬轴承钢锭,通过宏观观察、化学分析以及非金属夹杂物和碳化物的测定,得到了化学成分和气体含量在锭中的分布、非金属夹杂物和碳化物的类型、含量和分布以及枝晶间化学成分的偏析。从而得出经电渣炉重熔用水冷结晶器铸锭方法生产的钢锭,优于用一般铸锭法的钢锭;小型锭或扁型锭比大型锭或方型锭为好;采用高温扩散退火处理对改善钢锭的铸态组织有显著效果;而真空冶炼铸锭工艺则是提高轴承钢锭质量的又一有效途径。 Abstract：Nine high carbon chromium bearing steel ingots melted and teemed bydifferent processes have been sectioned longitudinally and their macrostructureincluding distribution of non-metallic inclusions and carbides as well as gascontent, etc. have been examined. Ingots made by electroslage refining and so-lidifying in water cooling crystallizer showed better quality than those made bythe conventional process, especially for slabs or ingots with smaller cross-sections. High temperature diffusion annealing treatments promote the refinementof the macrostructure of ingots. Vacuum melting and teeming are very effectivefor the improvement of the quality of ingots.      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1977/V13/Iz1/109 No related articles found! Viewed Full text Abstract Cited   Shared      Discussed