金属学报  1963, Vol. 6 Issue (1): 23-27

论文 本期目录 | 过刊浏览 |

论磨矿机的临界转速

王增图

东北工学院

ON THE CRITICAL SPEEDS OF THE TUMBLING MILLS

WANG TSENG-TU North-eastern Institute of Technology

王增图. 论磨矿机的临界转速[J]. 金属学报, 1963, 6(1): 23-27.
. ON THE CRITICAL SPEEDS OF THE TUMBLING MILLS[J]. Acta Metall Sin, 1963, 6(1): 23-27.

摘要 参考文献 相关文章 Metrics 全文: PDF(415 KB)   摘要: 本文对磨矿机的临界转速问题,作了此较详细的理论探讨.同时,指出了Davis公式的严重缺点,并且提出了计算公式:(?)依照我们的理论,则目前流行的高转速磨矿在理论上说是完全可行的.经过分析,以及从实验时的实测数据,与用公式(8)及公式(1)(见正文)计算所得的结果加以比较,可以看出:该公式更有理论基础和更接近于实际. Abstract：A new theory of grinding in tumbling mills is suggested.According to this theory the critical speed of ball mill is represented by:(?)in which:n—critical speed in r.p.m.;f—coefficient of friction between balls and the internal surface of the mill;D—internal diameter of the mill in meter;k=R_2/R_1,R_1 the internal radius of the mill and R_2 the distances between thesurface of ball load and the mill axis.This equation gives a better agreement between theoretical data and experimentalresults than the well known Davis' equation. 收稿日期: 1963-01-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 王增图 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1963/V6/I1/23 见参考文献[3] ,P.274． [1] Fischer,H.:Z.V.D.I.,1904,48,437． [2] White,H.A.:J.Chem.Met.Min.Soc.South Africa,1905,5,290． [3] Davis,E.W.:Trans.AIME,1920,61,250． [4] #12 [5] Hukki,R.T.:Progress in Mineral Dressing,(Almqvist'& Wiksell,1958) ,p.85． [6] Hukki,R.T.:Mine Quarry Eng.,1958,24,304． [7] Hukki,R.T.:Min.Eng.,1958,10,581． [8] Hukki,R.T.:International Mineral Processing Congress,(IMM,London,1960) ,p.7． [9] Gow,A.M.:Trans.AIME,1934,112,24． [10] Rose,H.E.,Sullivan,R.M.:Ball,Tube and Rod Mills,(Constable and Company,London,1958) ,p.42． [11] #12 [12] #12 [13] Tanner,H.,Heikkinen,T.:Progress in Mineral Dressing,(Almqvist & Wiksell.,1958) ,p.123． No related articles found! Viewed Full text Abstract Cited   Shared      Discussed