金属学报  1956, Vol. 1 Issue (3): 295-300

论文 本期目录 | 过刊浏览 |

轧板摩擦力分布曲面

王美英

北京钢铁工业学院

TWO DIMENTIONAL DISTRIBUTION OF FRICTION COMPONENTS FOR PLATE ROLLING

WANG MEI-YING Peking Institute of Iron and Steel

王美英. 轧板摩擦力分布曲面[J]. 金属学报, 1956, 1(3): 295-300.
. TWO DIMENTIONAL DISTRIBUTION OF FRICTION COMPONENTS FOR PLATE ROLLING[J]. Acta Metall Sin, 1956, 1(3): 295-300.

摘要 参考文献 相关文章 Metrics 全文: PDF(1063 KB)   摘要: <正> 一、引言大家都知道轧板的压力分布的研究对于工业发展的重要性,而摩擦力又是压力的先决条件。但轧板接触面上摩擦力分布曲面至今仍然不知道。过去关于这方面的工作很多,如:卡尔门固体摩擦理论,齐别尔摩擦力为常数的理论,纳德的滑油理论,柴力可夫及阿罗宛的黏着理论.又有按照卡尔门方程式与实验结果所算出的摩擦力分布曲线,如布琅的分析,及平均摩擦线理论.以上这些作者由于看 Abstract：This paper demonstrates a method of obtaining the surface distribution offriction components for plate rolling from the“rule of gradient”and experimentalpressure surface.An example was worked out.It appears that the surface dis-tribution of friction components is continuous except at the no-slip point,which isthe singular point for the case of slipping friction.The surface thus obtained serves as the boundary condition for the threedimentional problem of plate rolling.This result appears to be the first twodimentional distribution of friction components for plate rolling,and this methodis applicable to other cases such as forging. 收稿日期: 1956-03-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 王美英 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1956/V1/I3/295 [1] Karman,T.H.,Z.ang.Math.u.Mech.,5,1925,p.p.139-41,On the Theory of Rolling. [2] #12 [3] Nadai,A.,Jourual of Applied Mechanics,p.p.A54-A62,Amer.Soc.Mech.Engs.,June 1939,The Forces Required for Rolling Steel Strip under Tension. [4] #12 [5] Orowan,E,Proc.I.Mech.E.,150(1943) ,No.4,p.p.140-67,The Calculation of Rolling Pressure in Hot and Cold Plat Rolling. [6] Brown,G.M.,Report to the Rolling Mill Research Sub-committee of the Iron and Steel Industrial Research Council,见Underwood,The Rolling of Metals. [7] 刘叔仪,物理学报十二卷一期,1956． [8] 刘叔仪,钢院学报第一辑,1955． [9] Hoff und Dall,Grundlagen Des Walzverfahrens,1950,Düsseldof. [10] Siebel,E.and Lueg,W.,Mitt.K.W.,Inst.Eisenf.,15(1933) ,p.p.1-14,Investigation into the Distribution of Pressure at the Surface of the Material in Contact with the Rolls. No related articles found! Viewed Full text Abstract Cited   Shared      Discussed