EFFECT OF SO2 ON CORROSION EVOLUTION OF Q235B STEEL IN SIMULATED COASTAL- INDUSTRIAL ATMOSPHERE

  • Wenjuan CHEN ,
  • Long HAO ,
  • Junhua DONG ,
  • Wei KE ,
  • Huailiang WEN
Expand
  • State Key Laboratory for Corrosion and Protection, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016

Received date: 2013-11-15

  Revised date: 2014-03-13

  Online published: 2014-07-20

Supported by

Supported by National Natural Science Foundation of China (Nos.51201170 and 51131007)

Abstract

采用循环干/湿模拟腐蚀增重实验、动电位极化曲线、电化学阻抗谱和XRD方法, 研究了模拟海岸-工业大气中SO2对Q235B钢腐蚀行为的影响. 结果表明, 在腐蚀初期SO2抑制了Q235B钢的腐蚀; 在腐蚀后期, SO2促进了Q235B钢的腐蚀. 当SO2的浓度较低时, 腐蚀速率随SO2浓度的升高而增大; 当SO2的浓度较高时, 腐蚀速率随SO2浓度的升高而减小. 工业-海岸大气中的SO2组分可以抑制腐蚀产物中g -FeOOH和b -FeOOH的生成, 而促进a -FeOOH生成. 低碳钢腐蚀速率随SO2浓度变化出现的极值现象与SO2导致的锈层相组分变化密切相关.

Cite this article

Wenjuan CHEN , Long HAO , Junhua DONG , Wei KE , Huailiang WEN . EFFECT OF SO2 ON CORROSION EVOLUTION OF Q235B STEEL IN SIMULATED COASTAL- INDUSTRIAL ATMOSPHERE[J]. Acta Metall Sin, 2014 , 50(7) : 802 -810 . DOI: 10.3724/SP.J.1037.2013.00738

References

[1] Leygraf C, Graedel T. Atmospheric Corrosion. New York: John Wiley & Sons, 2000: 10
[2] Singh D D N, Yadav S, Saha J K. Corros Sci, 2008; 50: 93
[3] Casta?o J G, Botero C A, Restrepo A H, Agudelo E A, Correa E, Echeverría F. Corros Sci, 2010; 52: 216
[4] Hou W, Liang C. Corrosion, 1999; 55: 65
[5] Zhang Q C, Wu J S, Wang J J, Zheng W L, Li A B. Mater Chem Phys, 2002; 77: 603
[6] Mendoza A R, Corvo F. Corros Sci, 1999; 41: 75
[7] Dawson J L, Ferreira M G S. Corros Sci, 1986; 26: 1009
[8] Weissenrieder J, Leygraf C. J Electrochem Soc, 2004; 151: B165
[9] Hao L, Zhang S X, Dong J H, Ke W. Corros Sci, 2012; 58: 175
[10] Dong J H. Corros Sci Prot Technol, 2010; 22: 261
[10] (董俊华. 腐蚀科学与防护技术, 2010; 22: 261)
[11] Hao L, Zhang S X, Dong J H, Ke W. Metall Mater Trans, 2012; 43: 1724
[12] Wang J H, Wei F I, Chang Y S, Shih H C. Mater Chem Phys, 1997; 47: 1
[13] Misawa T, Hashimoto K, Shimodaira S. Corros Sci, 1974; 14: 131
[14] Evans U R, Taylor C A J. Corros Sci, 1972; 12: 227
[15] Saha J K. Corrosion of Constructional Steels in Marine and Industrial Environment. Heidelberg: Springer, 2013: 13
[16] Fuente D D L, Díaz I, Simancas J, Chico B, Morcillo M. Corros Sci, 2011; 53: 604
[17] Chen Y Y, Tzeng H J, Wei L I, Shih H C. Mater Sci Eng, 2005; A398: 47
[18] Ishikawa T, Katoh R, Yasukawa A, Kandori K, Nakayama T, Yuse F. Corros Sci, 2001; 43: 1727
[19] Asami K, Kikuchi M. Corros Sci, 2003; 45: 2671
[20] Shiotani K, Tanimoto W, Maeda C, Kawabata F, Amano K. Corros Eng, 2000; 49: 67
[21] Allam I M, Arlow J S, Saricimen H. Corros Sci, 1991; 32: 417
[22] Dong J H, Han E H, Ke W. Sci Technol Adv Mater, 2007; 8: 559
[23] Melchers R E. Corros Sci, 2008; 50: 3446
[24] Stramann M, Bohnenkamp K, Engell H J. Corros Sci, 1983; 23: 969
[25] Vaynman S, Guico R S, Fine M E, Manganello S J. Metall Mater Trans, 1997; 28A: 1274
[26] Mansfeld F. Corrosion, 1988; 44: 856
[27] Mansfeld F, Lin S, Chen Y C. J Electrochem Soc, 1988; 135: 906
[28] Stern M, Geary A L. J Electrochem Soc, 1957; 104: 56
[29] Revie R W, Uhlig H H. Corrosion and Corrosion Control. 4th Ed., New York: John Wiley & Sons, 2008: 115
[30] Stratmann M, Streckel H, Kim K T, Crockett S. Corros Sci, 1990; 30: 715
[31] Zhang S H, Lyon S B. Corros Sci, 1993; 35: 713
[32] Frankel G S, Stratmann M, Rohwerder M, Michalik A, Maier B, Dora J, Wicinski M. Corros Sci, 2007; 49: 2021
Outlines

/