HIGH TEMPERATURE CREEP AND FATIGUE BEHAVIOR AND LIFE PREDICTION&nbsp;METHOD &nbsp;OF A TiAl ALLOY

YU Huichen; DONG Chengli; JIAO Zehui; KONG Fantao; CHEN Yuyong; SU Yongjun

doi:10.3724/SP.J.1037.2013.00434

Acta Metall Sin >

2013 , Vol. 49 >Issue 11: 1311 - 1317

DOI: https://doi.org/10.3724/SP.J.1037.2013.00434

HIGH TEMPERATURE CREEP AND FATIGUE BEHAVIOR AND LIFE PREDICTION METHOD OF A TiAl ALLOY

YU Huichen ,
DONG Chengli ,
JIAO Zehui ,
KONG Fantao ,
CHEN Yuyong ,
SU Yongjun

Expand

1) Beijing Key Laboratory of Aeronautical Materials Testing and Evaluation, Science and Technology on Advanced High Temperature Structural Materials Laboratory, Beijing Institute of Aeronautical Materials, Beijing 100095
2) National Key Laboratory of Precision Hot Processing of Metals, Harbin Institute of Technology, Harbin 150001

Received date: 2013-07-23

Revised date: 2013-08-31

Online published: 2013-11-11

Fold

Abstract

Creep (at 700℃) and low cycle fatigue (at 700 and 750℃) tests of Ti－43Al－9V－Y alloy with duplex (DP) and fully lamellar (FL) microstructures are carried out to study the creep, fatigue deformation and life prediction. Firstly, Omega method is employed to characterize the creep deformation and to predict the rupture life. Secondly, the proposed fatigue life model based on walker strain is employed to predict the fatigue life for these two types of TiAl alloy. The results show that: (1) high temperature creep curves of the material of both DP and FL microstructure contain steady and accelerated creep stages other than initial creep stage, and Omega method is able to characterize the creep deformation of TiAl alloy with DP and FL microstructure; (2) the rupture time of the material of FL microstructure is longer than that of DP microstructure, and the predicted rupture time by Omega method agrees well with the test data; (3) the fatigue life of DP is longer than that of FL under the same test condition, and the predicted fatigue life is well located in the scatter band of 3 of the test fatigue life.

Key words： Duplex; fully lamellar; creep, low cycle fatigue; life prediction

Cite this article

YU Huichen , DONG Chengli , JIAO Zehui , KONG Fantao , CHEN Yuyong , SU Yongjun . HIGH TEMPERATURE CREEP AND FATIGUE BEHAVIOR AND LIFE PREDICTION METHOD OF A TiAl ALLOY[J]. Acta Metall Sin, 2013 , 49(11) : 1311 -1317 . DOI: 10.3724/SP.J.1037.2013.00434

References

[1] Ding X F, Lin J P, Zhang L Q, Su Y Q, Chen G L. Acta Mater, 2012; 60: 498

[2] Henaff G, Gloanec AL. Intermetallics, 2005; 13: 543

[3] Lin J P, Xu X J, Wang Y L, Gao J F, Chen G L. Intermetallics, 2007; 15: 668

[4] Kong F T, Chen Y Y, Tian J, Chen Z Y. Mater Sci Technol, 2003; 11: 441

(孔凡涛, 陈玉勇, 田竞, 陈子勇. 材料科学与工艺, 2003; 11: 441)

[5] Wang Y H, Lin J P, He Y H. Intermetallics, 2008; 16: 215

[6] Chen G Q, Zhang B G, Liu W, Feng J C. Intermetallics, 2011; 19: 1857

[7] Zhu H L, Seo D Y, Maruyama K, Au P. Mater Sci Eng, 2008; A483－484: 533

[8] Chen Y Y, Niu H Z, Kong F T, Xiao S L. Intermetallics, 2011; 19: 1405

[9] Kassner M E, Perez－Prado M T. Prog Mater Sci, 2000; 45: 102

[10] Monkman F C, Grant N J. Proc ASTM, 1956; 56: 593

[11] Nagode A, Kosec L, Ule B. Eng Fail Anal, 2011; 18: 61

[12] Larson F R, Miller J. Trans ASME, 1952; 74: 765

[13] Orr R L, Sherby O D, Dorn J E. Trans ASM, 1954; 46: 113

[14] Manson S S, Brown W F. Proc ASTM, 1953; 53: 683

[15] Evans R, Wilshire B. Creep of Metals and Alloys. London: Institute of Metals, 1985: 1

[16] Prager M. J Pres Ves Technol, 2000; 122: 273

[17] Goodman J. Mechanics Applied to Engineering. London: Longmans, Green and Co., 1919: 631

[18] Smith J O. The Effect of Range of Stress on the Fatigue Strength of Metals.Bulletin No.334, Urbana, IL: Universityof Illinois, Engineering Experiment Station, 1942: 13

[19] Gerber H. Zeitschrift Bayerischen Architeckten Ingenieur－ Vereins, 1874; 3: 359

[20] Morrow J D. Fatigue Design Handbook－Advances in Engineering. Warrendate:Society of Automo－tive Engineers, 1968: 21

[21] Soderberg C R. Trans ASME, 1939; 52: 13

[22] Walker K. Effects of Environment and Complex Loading History on Fatigue Life.Philadelphia: American Society for Testing and Materials, 1970: 1

[23] Chen Y Y, Kong F T, Han J C, Chen Z Y, Tian J. Intermetallics, 2005; 13: 263

[24] Yeom J T, Kim J Y, Na Y S, Park N K. Met Mater Int, 2003; 9: 555

[25] Ye D Y, Wang Z L. Int J Fatigue, 2001; 23: 679

[26] Mediratta S R, Ramaswamy V, Rao P R. Int J Fatigue, 1988; 10: 13

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article

References