DISLOCATION MECHANISM OF SURFACE MODIFICATION FOR COMMERCIAL PURITY ALUMINUM &nbsp;AND ALUMINUM ALLOY BY LASER SHOCK PROCESSING

LUO Xinmin; CHEN Kangmin; ZHANG Jingwen; LU Jinzhong; REN Xudong; LUO Kaiyu; ZHANG Yongkang

doi:10.3724/SP.J.1037.2013.00035

2013 , Vol. 49 >Issue 6: 667 - 674

DOI: https://doi.org/10.3724/SP.J.1037.2013.00035

DISLOCATION MECHANISM OF SURFACE MODIFICATION FOR COMMERCIAL PURITY ALUMINUM AND ALUMINUM ALLOY BY LASER SHOCK PROCESSING

LUO Xinmin ,
CHEN Kangmin ,
ZHANG Jingwen ,
LU Jinzhong ,
REN Xudong ,
LUO Kaiyu ,
ZHANG Yongkang

Expand

1) School of Materials Science and Engineering, Jiangsu University, Zhenjiang 212013
2) Analysis and Test Center, Jiangsu University, Zhenjiang 212013
3) School of Mechanical Engineering, Jiangsu University, Zhenjiang 212013
4) School of Mechanical Engineering, Southeast University, Nanjing 211189

Received date: 2013-01-24

Revised date: 2013-04-02

Online published: 2013-06-11

Fold

Abstract

Surface modification experiment of the commercial purity aluminum (α-Al) and Al-Cu-Mg alloyed aviation aluminum alloy 2A02 by laser shock processing (LSP) was implemented. The surface strengthening effect of both the target materials was investigated from dislocation mechanisms of microstructural response by means of TEM method. The results show that the strengthening effect of the two kinds of materials by laser shock processed is significantly different. The strengthening mechanism of α-Al by laser shock can be attributed to the multiplication of a large number of dislocations. With the increase of the impact number of laser shock and the degree of deformation, the new-generated dislocations will pile up and interact with the forest dislocations, and the dislocation lines will gradually evolve into waved-like, or wind into dislocation tangles and dislocation networks. But the hardness curve of the laser shocked (α-Al) will fast and linearly decline due to Bauschinger effect (BE) and stress wave damping. The laser shock strengthening mechanisms of the aging-hardened aluminum alloy 2A02 can be summarized to the enhancement of the matching between the elastic energy of dislocations with the ultra-high energy of laser shock processing due to the higher matrix strength and the dislocation-pinning effect of large number of dispersed precipitates, as well as the complex dislocation networks in between the precipitates constructed by the dislocations induced by laser shock. The matrix strengthened by laser shock processing and the precipitates keep the extra-semi-coherent relationship to coordinate the total deformation, with the number of laser shock increase, dislocation multiplication and the vacancy motion constitutes geometrically necessary boundaries (GNBs), which consists of the sub-grain boundaries to refine the matrix into the nanometer-grains. The strengthening mechanism of surface modification of aluminum alloy by laser shock processing is formed of the internal stress state caused by the combination of the complex dislocation configurations and the Hall-Petch effect of the nanocrystalline grains.

Key words： commercial purity aluminum (α-Al); aluminum alloy; laser shock processing; surface modification, dislocation; microstructure

Cite this article

LUO Xinmin , CHEN Kangmin , ZHANG Jingwen , LU Jinzhong , REN Xudong , LUO Kaiyu , ZHANG Yongkang . DISLOCATION MECHANISM OF SURFACE MODIFICATION FOR COMMERCIAL PURITY ALUMINUM AND ALUMINUM ALLOY BY LASER SHOCK PROCESSING[J]. Acta Metall Sin, 2013 , 49(6) : 667 -674 . DOI: 10.3724/SP.J.1037.2013.00035

References

[1] Lu J Z, Luo K Y, Zhang Y K, Cui C Y, Sun G F, Zhou J Z, Zhang L, You J,Chen K M, Zhong J W. Acta Mater, 2010; 58: 3984

[2] Trdan U, Grum J, Hill M R. Mater Sci Forum, 2011; 681: 480

[3] Montross C S, Wei T, Ye L, Clark G, Mai Y W. Int J Fatigue, 2002; 24: 1021

[4] Clauer A H, Lahrman D F. Key Eng Mater, 2001; 197: 121

[5] Zhou Z M. Dislocation Configuration Evolution. Shenyang: Northeastern University Press, 2003: 60

(周志敏. 位错组态演化. 沈阳: 东北大学出版社, 2003: 60)

[6] Luo X M, Ma H, Zhang J W, Zhang Y K. Mater Rev, 2010; 24(5): 11

(罗新民, 马辉, 张静文, 张永康. 材料导报, 2010; 24(5): 11)

[7] Guo N G, Luo X M, Hua Y Q. Mater Rev, 2006; 20(6): 10

(郭乃国, 罗新民, 花银群. 材料导报, 2006; 20(6): 10)

[8] Liang X B, Zhang Z B, Chen Y X, Xu B S. Acta Metall Sin, 2012; 48: 289

(梁秀兵, 张志彬, 陈永雄, 徐滨士. 金属学报, 2012; 48: 289)

[9] Luo X M, Zhao G Z, Chen K M, Zhang Y K, Luo K Y, Ren X D. Acta Metall Sin, 2012; 48: 1116

(罗新民, 赵广志, 陈康敏, 张永康, 罗开玉, 任旭东. 金属学报, 2012; 48: 1116)

[10] Zhang K S. Acta Mech Sin, 2004; 36: 714

(张克实. 力学学报, 2004; 36: 714)

[11] Zhao Z W. Appl Math Mech, 2001; 22: 79

(赵祖武. 应用数学和力学, 2001; 22: 79)

[12] Feng A X, Nie G F, Xue W, Cao Y P, Xu X X, Li B, Shi F. Acta Metall Sin, 2012; 48: 205

(冯爱新, 聂贵峰, 薛伟, 曹宇鹏, 徐晓翔, 李彬, 施芬. 金属学报, 2012; 48: 205)

[13] Zhang G T, Sheng G M, Huang L. Mater Rev, 2008; 22(spec): 135

(张功庭, 盛光敏, 黄利. 材料导报, 2008; 22(专辑): 135)

[14] Liu G, Sun Y L, Hu J, Zhou K. Acta Metall Sin, 2010; 46: 979

(刘刚, 孙雅丽, 胡津, 周科. 金属学报, 2010; 46: 979)

[15] Zhao J S. Fundamental Theory of Dislocation. Beijing: Beijing Institute of Aviation Press, 1982: 111

(赵敬世. 位错理论基础. 北京: 北京航空学院出版社, 1982: 111)

[16] Cahn R W, Haasen P. Physical Metallurgy-III. Amsterdam: Elsevier Science B.V., 1996: 1979

[17] Deng Y L, Zhang X M, Tang J G, Liu Y, Chen Z Y, Zhou Z P. Acta Metall Sin, 2005; 41: 477

(邓运来, 张新明, 唐建国, 刘瑛, 陈志永, 周卓平. 金属学报, 2005; 41: 477)

[18] Hu Q, Zhang Q C, Fu S H, Cao P T, Gong M. Acta Phys Sin, 2011; 60: 096201

(胡琦, 张青川, 符师桦, 曹鹏涛, 龚明. 物理学报, 2011; 60: 096201)

[19] Xiong X M, Zhang Q C, Cao P T, Xiao R. Acta Metall Sin, 2009; 458: 892

(熊少敏, 张青川, 曹鹏涛, 肖锐. 金属学报, 2009; 458: 892)

[20] Liu G, Yan W C, Yu F X, Zhao G, Zhao X, Zuo L. Acta Metall Sin, 2011; 47: 649

(刘刚, 严文聪, 于福晓, 赵刚, 赵骧, 左良. 金属学报, 2011; 47: 649)

[21] Liu Q, Yao Z Y, Godfrey A, Liu W. Acta Metall Sin, 2009; 45: 641

(刘庆, 姚宗勇, Godfrey A, 刘伟. 金属学报, 2009; 45: 641)

[22] Yao Z Y, Liu Q, Godfrey A, Liu W. Acta Metall Sin, 2009; 45: 647

(姚宗勇, 刘庆, Godfrey A, 刘伟. 金属学报, 2009; 45: 647)

[23] Wu X L, Li B, Ma E. Appl Phys Lett, 2007; 91: 141908

[24] Li M, Chu W Y, Gao K W, Qiao L J. Acta Metall Sin, 2003; 39: 1099

(李明, 褚武扬, 高克玮, 乔利杰. 金属学报, 2003; 39: 1099)

[25] Luo X M, Zhang J W, Ma H, Zhang Y K, Chen K M, Ren X D, Luo K Y. Trans Mater Heat Treat, 2012; 33: 8

(罗新民, 张静文, 马辉, 张永康, 陈康敏, 任旭东, 罗开玉. 材料热处理学报, 2012; 33: 8)

[26] Lu K, Lu L. Acta Metall Sin, 2000; 36: 785

(卢柯, 卢磊. 金属学报, 2000; 36: 785)

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article

References