CRYSTALLIZATION BEHAVIOR OF ANNEALED Zr55Cu30Al10Ni5 BULK METALLIC GLASS  DURING PULSED LASER REMELTING

  • YANG Gaolin ,
  • LIN Xin ,
  • HU Qiao ,
  • ZHANG Ying ,
  • WANG Zhitai ,
  • LI Peng ,
  • HUANG Weidong
Expand
  • State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072

Received date: 2012-11-13

  Revised date: 2013-03-14

  Online published: 2013-06-11

Abstract

The crystallization behavior of annealed metallic glasses during pulsed laser remelting was investigated in this work. The as-casted Zr55Cu30Al10Ni5 bulk metallic glasses were annealed at 390, 430, 530, 792 and 902℃ separately. And then these annealed alloys were remelted by pulsed laser. The experiment results show that the alloys annealed at 390 and 430℃ were still metallic glasses, and their crystallization behavior during remelting is similar to the remelting of metallic glass without annealing treatment. The specimens annealed at 530, 792 and 902℃ were completely crystallized. After remelting, the molten pools of these specimens were amorphous. For the specimens annealed at 530 and 792℃, there was no obvious epitaxial growth at the bottom of molten pools. For the specimens annealed at 902℃, there was little primary phase epitaxial growth at bottom of molten pool after one time laser remelting while without epitaxial growth after 11 times laser remelting. The epitaxial growth was caused by the area reserved the composition distribution of CuZr2 primary phase during laser remelting. So it is hard to obtain epitaxial growth during laser remelting for Zr55Cu30Al10Ni5m bulk metallic glasses even it has a crystallization substrate because of the slow diffusion. So it is easy to keep molten pool as amorphous state during laser treating Zr55Cu30Al10Ni5 bulk metallic glasses.

Cite this article

YANG Gaolin , LIN Xin , HU Qiao , ZHANG Ying , WANG Zhitai , LI Peng , HUANG Weidong . CRYSTALLIZATION BEHAVIOR OF ANNEALED Zr55Cu30Al10Ni5 BULK METALLIC GLASS  DURING PULSED LASER REMELTING[J]. Acta Metall Sin, 2013 , 49(6) : 649 -657 . DOI: 10.3724/SP.J.1037.2012.00680

References

[1] Byrne C J, Eldrup M. Science, 2008; 321: 502

[2] Zhang Q S, Zhang H F, Wang A M, Ding B Z, Hu Z Q. Acta Metall Sin, 2002; 38: 835
 (张庆生, 张海峰, 王爱民, 丁炳哲, 胡壮麒. 金属学报, 2002; 38: 835)
[3] Wang C, Zhang Q S, Jiang F, Zhang H F, Hu Z Q. Acta Metall Sin, 2002; 38: 765
 (王成, 张庆生, 江峰, 张海峰, 胡壮麒. 金属学报, 2002; 38: 765)
[4] Shen J, Wang G, Sun J F, Chen D M, Xing D W, Zhou B D.   Acta Metall Sin, 2004; 40: 518
 (沈军, 王刚, 孙剑飞, 陈德民, 邢大伟, 周彼德. 金属学报, 2004; 40: 518)
[5] Inoue A, Takeuchi A. Acta Mater, 2011; 59: 2243
[6] Inoue A, Nishiyama N. MRS Bull, 2007; 32: 651
[7] Gilman J J. Science, 1980; 208: 856
[8] Wang H S, Chen H G, Jang J S C, Chiou M S. Mater Sci Eng, 2010; A528: 338
[9] Kumagai N, Samata Y, Kawashima A, Asami K, Hashimoto K. J Non-Cryst Solids, 1987; 93: 78
[10] Li B, Li Z Y, Xiong J G, Xing L, Wang D, Li Y. J Alloys Compd, 2006; 413: 118
[11] Yue T M, Su Y P, Yang H O. Mater Lett, 2007; 61: 209
[12] Ma F X, Yang J J, Zhu X N, Liang C Y, Wang H S. Appl Surf Sci, 2010; 256: 3653
[13] Otsu M, Ide Y, Sakurai J, Hata S, Takashima K.   J Solid Mech Mater Eng, 2009; 3: 387
[14] Zheng B, Zhou Y, Smugeresky J E, Lavernia E J. Metall Mater Trans, 2009; 40A: 2009
[15] Yang G L, Lin X, Liu F C, Hu Q, Ma L, Li J F, Wei D H. Intermetallics, 2012; 22: 110
[16] Zhong M L, Liu W J, Yao K F, Ren J L, Hu S Q, Zhao H. Acta Metall Sin, 1997; 33: 413
 (钟敏霖, 刘文今, 姚可夫, 任家烈, 胡姝嬙, 赵宏. 金属学报, 1997; 33: 413)
[17] Basu A, Samant A N, Harimkar S P, Majumdar J D, Manna I, Dahotre N B. Surf Coat Technol,2008; 202: 2623
[18] Sun H, Flores K M. Metall Mater Trans, 2010; 41A: 1752
[19] Sun H, Flores K M. J Mater Res, 2008; 202: 2623
[20] Liu H J, Chen W R, Wang Y M, Wang D H, Li D J, Dong C. Acta Metall Sin, 2003; 39: 938
 (刘海军, 陈伟荣, 王英敏, 王德和, 李德俊, 董闯. 金属学报, 2003; 39: 938)
[21] Baker H. ASM Handbook. Materials Parks, OH: ASM International, 1993: 2
[22] Liu B B, Liu B Y, Fang X S, Zhang L Q, Ye F, Chen G L. J Alloys Compd, 2010; 504: 208
[23] Liu Z X, Huang W D.   Chin J Lasers, 2004; 31: 491
 (刘振侠, 黄卫东. 中国激光, 2004; 31: 491)
[24] Liu F C, Lin X, Huang C P, Song M H, Yang G L, Chen J, Huang W D. J Alloys Compd,2011; 509: 4505
[25] Cao Y Q, Lin X, Wang Z T, Yang H O, Huang W D. Acta Metall Sin, 2011; 5: 540
 (曹永青, 林鑫, 汪志太, 杨海欧, 黄卫东. 金属学报, 2011; 5: 540)
[26] Shen J, Zou J, Ye L, Lu Z P, Xing D W, Yan M, Sun J F. J Non-Cryst Solids, 2005; 351: 2519
[27] Li M, Kuribayashi K. Metall Mater Trans, 2003; 34A: 2999
[28] Xing L Q, Chen X C, Yang G C, Zhou Y H, Guo Z Q. Acta Metall Sin, 1991; 27: 255
(邢力谦, 陈熙琛, 杨根仓, 周尧和, 郭振琪. 金属学报, 1991; 27: 255)
[29] Hofmann D C, Suh J Y, Wiest A, Duan G, Lind M, Demetriou M D, Johnson W L. Nature, 2008; 451: 1085
Outlines

/