FORMATION MECHANISM OF ANOMALOUS EUTECTIC AND MICROSTRUCTURE EVOLUTION IN HIGHLY UNDERCOOLED SOLIDIFICATION OF Ni-30%Sn ALLOY

  • GUO Xiong ,
  • LIN Xin ,
  • WANG Zhitai ,
  • CAO Yongqing ,
  • PENG Dongjian ,
  • HUANG Weidong
Expand
  • State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072

Received date: 2012-10-16

  Revised date: 2013-01-06

  Online published: 2013-04-11

Abstract

Eutectic solidification involves many important metals and inorganic non-metallic materials. To date, there still exist a large controversy on the formation mechanism of anomalous eutectic under the nonequilibrium rapid solidification. In this work, adopting glass flux method combined with cyclical superheating, the recalescence behaviors and microstructure evolution in highly undercooled solidification of Ni-30%Sn hypoeutectic alloy were investigated. It is found that, there is not an obvious recalescence process in the alloy melts with the low undercooling. With increasing the melt undercooling, the solidification microstructure experienced a gradual phase evolutions from αNi dendrite + (α-Ni+Ni3Sn) lamellar or feathery eutectic to completely (α-Ni+Ni3Sn) anomalous eutectic, which led the recalescence process to occur from twice to once in the cooling process. Through analyzing the nucleation behaviors of α-Ni and Ni3Sn phases and the relationships between their growth velocities and the melt undercoolings, and the variation of their crystalline fraction in rapid recalescence process, the formation mechanism of anomalous eutectic was explained. The formation of anomalous eutectic in highly undercooled Ni-30%Sn hypoeutectic alloy should be attributed to the following two reasons: in the large melt undercooling, the complete coarsening and remelting of the pre-formed refined α-Ni dendrite skeleton occured in the subsequent recalescence process, and then the dendrite fragments were surrounded by the precipitated Ni3Sn phase, which eventually led to the formation of anomalous eutectic. With the undercooling increased, the primary single-phase dendritic growth will change to the two-phase dendritic growth, the coarsening and remelting of two-phasic dendrites occured in the subsequent larger recalescence process, which also led to the formation of anomalous eutectic.

Cite this article

GUO Xiong , LIN Xin , WANG Zhitai , CAO Yongqing , PENG Dongjian , HUANG Weidong . FORMATION MECHANISM OF ANOMALOUS EUTECTIC AND MICROSTRUCTURE EVOLUTION IN HIGHLY UNDERCOOLED SOLIDIFICATION OF Ni-30%Sn ALLOY[J]. Acta Metall Sin, 2013 , 29(4) : 475 -482 . DOI: 10.3724/SP.J.1037.2012.00614

References

[1] Zhou Y H, Hu Z Q, Jie W Q. Solidification Technology. Beijing: Machanical Industry Press, 1998: 227


(周尧和, 胡壮麒, 介万奇. 凝固技术. 北京: 机械工业出版社, 1998: 227)

[2] Kear B H. Rapidly Solidified Amorphous and Crystalline Alloys. NorthHolland: Elsevier Science Pub Co, 1982: 49

[3] Hu H Q. Fundamentals of Metal Solidification. Beijing: Machanical Industry Press, 2000: 255

(胡汉起. 金属凝固原理. 北京: 机械工业出版社, 2000: 255)

[4] Wang B H. PhD Dissertation, Xiangtan University, 2008

(王宝华. 湘潭大学博士学位论文, 2008)

[5] Chen D. Master Thesis, Northwestern Polytechnical University, Xi'an, 2006

(陈达. 西北工业大学硕士学位论文, 西安, 2006)

[6] Fei J Y, Zhou A M, Wang B L. Surf Technol, 1990; 19(6): 7

(费敬银, 周爱梅, 王宝珑. 表面技术, 1990; 19(6): 7)

[7] Zhang Z Z, Song G S, Yang G C, Zhou Y H. Prog Nat Sci, 2000; 10(5): 54

(张振忠, 宋广生, 杨根仓, 周尧和. 自然科学进展, 2000; 10(5): 54)

[8] Kattamis T Z, Flemings M C. Metall Trans, 1970; 1: 1449

[9] Jones B L. Metall Trans, 1971; 2A: 2950

[10] Li M, Nagashio K, Kuribayashi K. Acta Mater, 2002; 50: 3239

[11] Li M, Nagashio K, Ishikawa T, Yoda S, Kuribayashi K. Acta Mater, 2005; 53: 731

[12] Wei B B, Herlach D M, Feuerbacher B, Sommer F. Acta Metall Mater, 1993; 41: 1801

[13] Wei B B, Yang G C, Zhou Y H. Acta Aeronaut Astronaut Sin, 1990; 11(1): 59

(魏炳波, 杨根仓, 周尧和. 航空学报, 1990; 11(1): 59)

[14] Wei B B. PhD Dissertation, Northwestern Polytechnical University, Xi'an, 1989

(魏炳波.西北工业大学博士学位论文, 西安, 1989)

[15] Wei B B, Yang G C, Zhou Y H. Acta Metall, 1991; 39: 1249

[16] Wei B B, Herlach D M, Sommer F, Kurz W. Mater Sci Eng, 1993; A173: 355

[17] Xing L Q, Yang G C, Zhou Y H, Guo Z Q. Mater Sci Prog, 1991; 5(1): 16

(邢力谦, 杨根仓, 周尧和, 郭振琪. 材料科学进展, 1991; 5(1): 16)

[18] Goetzinger R, Barth M, Herlach D M. Acta Mater, 1998; 46: 1647

[19] Li J F, Jie W Q, Zhao S, Zhou Y H. Metall Mater Trans, 2007; 38A: 1806

[20] Yang C, Gao J, Zhang Y K, Kokbe M, Herlach D M. Acta Mater, 2011; 59: 3915

[21] Lin X, Yue T M, Yang H O, Huang W D. Metall Mater Trans, 2007; 38A: 127

[22] Lin X, Yue T M, Yang H O, Huang W D. Acta Mater, 2006; 54: 1901

[23] Herlauch D M. Mater Sci Eng, 1994; R12: 177

[24] Shao G, Tsakiropoulos P. Acta Metall Mater, 1994; 42: 2937

[25] Wu Y, Pillone T J, Shiohara Y. Metall Trans, 1987; 18A: 915

[26] Smityhells C J. Metals Reference Book. 5th Ed, London: Butterworth & Ltd., 1976: 186

[27] Lipon J, Kurz W, Trivedi R. Acta Metall, 1987; 35: 957

[28] Trivedi R, Lipton J, Kurz W. Acta Metall, 1987; 35: 965
Outlines

/