Acta Metall Sin  2004, Vol. 40 Issue (2): 215-219     DOI:

Research Articles Current Issue | Archive | Adv Search |

Effect of Mould Materials on the As-Cast Microstructures of a Super-High Strength Al Alloy Cast by Low Frequency Electromagnetic Casting

DONG Jie; LIU Xiaotao; ZHAO Zhihao; BAO Weiping; CUI Jianzhong

The Key Laboratory of Electromagnetic Processing of Materials; Ministry of Education; Northeastern University; Shenyang 110004

DONG Jie; LIU Xiaotao; ZHAO Zhihao; BAO Weiping; CUI Jianzhong. Effect of Mould Materials on the As-Cast Microstructures of a Super-High Strength Al Alloy Cast by Low Frequency Electromagnetic Casting. Acta Metall Sin, 2004, 40(2): 215-219 .

Abstract References Related Articles Recommended Metrics Download:  PDF(4056KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The effect of mould materials on the magnetic intensity in ingots was numerically simulated, then the magnetic intensities without ingots were measured, and some experiments were conducted to study these effects. The results show that during low frequency electromagnetic casting the mould with high electrical resistivity such as titanium alloy can greatly reduce eddy loss of mould, thus increase useful power. At the same condition, when the ingot was cast by titanium alloy mould (high electrical resistivity), the microstructures is uniform and fine, the average grain sizes at the border and center of the ingot are 24 μm and 27 μm respectively, but when the ingot was cast by aluminum alloy mould (low electrical resistivity), the microstructures of both the border and center of the ingot are coarse, their average sizes are 38 μm and 45 μm. Furthermore, the mould with higher electrical resistivity can increase the content of solute elements within grains. super-high strength Al alloy, Key words:  low frequency electromagnetic casting      mould       Received:  21 February 2003      ZTFLH:  TF777     TG113.2   Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors DONG Jie LIU Xiaotao ZHAO Zhihao BAO Weiping CUI Jianzhong URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y2004/V40/I2/215 [1] Li C G, Wu S J, Dai S L, Yang S J. J Nonfer Met, 2002; 12(Suppl): 14(李成功,巫世杰,戴圣龙,杨守杰.中国有色金属学报,2002;12(增刊):14) [2] Chen C Q. J Nonfer Met, 2002; 12(Suppl): 22(陈昌麒.中国有色金属学报,2002;12(增刊):22) [3] Osman T M, Singh P M, Lewandowski J J. Scr Metall Mater, 1994; 31: 607 [4] Pandey A B, Majumdar B S, Miracle D B. Metall Mater Trans, 1998; 29A: 1237 [5] Adachi H, Osamura K, Ochiai S, Kusui J, Yokoe K. Scr Mater, 2001; 44: 1489 [6] Wu Y L, Froes F H, Alvarez A, Li C G, Liu J. Mater Design, 1997; 18: 211 [7] Kusui J, Fujii K, Yokoe K, Yokote T, Osamura K, Kubota O, Okuda H. Mater Sci Forum, 1996: 217 [8] Wei Q, Xiong B Q, Zhang Y A, Zhu B H, Shi L K. Trans Nonfer Met Soc Chin (Engl Ed), 2001; 11: 258 [9] Zhang B J, Cui J Z, Lu G M, Zhang Q, Ban C Y. Acta Metall Sin, 2002; 38: 215(张北江,崔建忠,路贵民,张勤,班春燕.金属学报,2002;38:215) [10] Zhang B J, Cui J Z, Lu G M, Xu G M. Chin J Nonfer Met, 2002; 12(Suppl): 112(张北江,崔建忠,路贵民,许光明.中国有色金属学报,2002;12(增刊):112) [11] Rodger D, Eastham J F. IEEE Trans Magn, 1983; 19: 2443 [12] Oszkr B, Preis K. IEEE Trans Magn, 1989; 25: 3145c [1] Xiaoyan CHEN,Zhe JIN,Xuefeng BAI,Yizhou ZHOU,Tao JIN,Xiaofeng SUN. EFFECT OF C ON THE INTERFACIAL REACTION AND WETTABILITY BETWEEN A Ni-BASED SUPERALLOY AND CERAMIC MOULD[J]. 金属学报, 2015, 51(7): 853-858. [2] MU Danning YANG Changlin WEI Xiaowei LIU Feng. RESEARCH ON GRAIN REFINEMENT IN BULK UNDERCOOLED Fe–Co BASE ALLOYS[J]. 金属学报, 2012, 48(12): 1409-1414. [3] CHEN Dandan ZHANG Haitao WANG Xiangjie CUI Jianzhong. INVESTIGATION ON MICROSEGREGATION OF Al-4.5%Cu ALLOY PRODUCED BY LOW FREQUENCY ELECTROMAGNETIC CASTING[J]. 金属学报, 2011, 47(2): 185-190. [4] Zhihao Zhao. EFFECT OF HOMOGENIZATION TREATMENT ON THE MICROSTRUCTURES OF LOW FREQUENCY ELECTROMAGNETIC CASTING 7050 ALUMINUM ALLOY[J]. 金属学报, 2007, 43(9): 956-960 . [5] Zhihao Zhao. STUDY ON MICROSTRUCTURES AND AGING CHARACTERISTICS OF 7050 ALUMINUM ALLOY PLATE EXTRUDED FROM LOW FREQUENCY ELECTROMAGNETIC CASTING INGOT[J]. 金属学报, 2007, 43(9): 949-955 . [6] GUO Liangliang; YAO Man; YIN Hebi; WANG Xudong; FANG Dacheng; LIU Xiao; YU Yan. CALCULATION AND DISCUSSION ON THE HEAT FLUX IN MOULD OF CONTINUOUS CASTING ROUND BILLET[J]. 金属学报, 2006, 42(9): 983-988 . [7] . Microstructures and creep properties of Mg-6Al based magnesium alloys with strontium and calcium addition[J]. 金属学报, 2006, 42(12): 1267-1273 . [8] . STUDY ON MECHANISM OF ENTRAPMENT IN SLAB CONTINUOUS CASTING MOULD WITH HIGH CASTING SPEED AND ARGON BLOWING[J]. 金属学报, 2006, 42(10): 1087-1090 . [9] YIN Hebi; YAO Man. Inverse Algorithm of Heat Transfer in Round Billet Continuous Casting Mould[J]. 金属学报, 2005, 41(6): 638-644 . [10] ZHANG Jiongming(Anshan Iron and Steel Research Institute; Anshan 114001);HE Jicheng; LI Baokuan(Northeastern University; Shenyang 110006). INFLUENCE OF GAS INJECTION ON FLUID FLOW IN MOULD[J]. 金属学报, 1995, 31(18): 269-274. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed