Please wait a minute...
Acta Metall Sin  2010, Vol. 46 Issue (4): 487-493    DOI: 10.3724/SP.J.1037.2009.00546
论文 Current Issue | Archive | Adv Search |
STUDY ON GROWTH MECHANISM OF LANTHANUM SALT CONVERSION COATING ON GALVANIZED STEEL
KONG Gang; LIU Renbin; LU Jintang; CHE Chunshan; ZHONG Zheng
College of Materials Science and Engineering; South China University of Technology; GuangZhou 510640
Cite this article: 

KONG Gang LIU Renbin LU Jintang CHE Chunshan ZHONG Zheng. STUDY ON GROWTH MECHANISM OF LANTHANUM SALT CONVERSION COATING ON GALVANIZED STEEL. Acta Metall Sin, 2010, 46(4): 487-493.

Download:  PDF(2103KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

Rare earth conversion coating was proposed as one of the most prospective alternatives to toxic chromate conversion coatings on some metals and alloys. In this work, the lanthanum salt conversion coating was obtained by immersing a galvanized steel in a lanthanum salt passivation solution modified with citric acid. Scanning electron microscopy (SEM), X–ray energy dispersive spectrometer (EDS), X–ray photoelectron spectroscopy (XPS) and infrared spectroscopy (IR) were used to investigate its structure and composition. Neutral salt spray (NSS) tests were used to eval- uate the anti–corrosive performance of the coating and the optimum range of treatment time. The results show that the lanthanum salt conversion coating modified with citric acid mainly consists of LaCit, La(OH)3/La2O3 and a trace of Zn(OH)2/ZnO. When treatment time is more than 10 min, the modified coating on the samples consists of two layers: the inner layer is compact and the outer lanthanum–riched layer is thin and poriferous. Cracks occur in the coating when treatment time within 10 s and are evolved during further treatment. The thickness of the coating obtained on galvanized steel that the immersion time is 1 min is approximately 250 nm, and increasing with treatment time within 60 min. The growing rate of the coating is faster than that of conversion coatings without modified with citric acid. The growth process of the coating can be divided into three stages: at the initial time complexes ions of lanthanum citrate were adsorbed on the whole surface of galvanized steel, then lanthanum citrate and lanthanum hydroxide are co–deposited on surface, and in the final stage there is lanthanum hydroxide mainly deposited on surface of the coating. The corrosion resistance of the coating is close to that of a chromate conversion coating. The optimum treatment time is 10 to 30 min.

Key words:  rare earth conversion coating      galvanized steel      citric acid     
Received:  21 August 2009     
Fund: 

Supported by International Zinc Association(No.IZA/CA/059)

URL: 

https://www.ams.org.cn/EN/10.3724/SP.J.1037.2009.00546     OR     https://www.ams.org.cn/EN/Y2010/V46/I4/487

[1] Klassen R D, Roberge P R, Hyatt C V. Electrochim Acta, 2001; 46: 3743
[2] Kendig M W, Buchheit R G. Corrosion, 2003; 59: 379
[3] Brinker C J, Sherer G W. Sol–gel Science. NEW YORK: Academic Press, 1990: 1
[4] Osborne J. Proceedings of the Workshop on Advanced Metal Finishing Technologies for Aerospace Applications. Air Force Office of Scientific Research, Keystone, Co., 1998: 1
[5] Hinton B R W, Wilson L. Corros Sci, 1989; 29: 967
[6] Motte C, Maury N, Olivier M G, Petitjean J P, Willem J F. Surf Coat Technol, 2005; 200: 2366
[7] Montemor M F, Simoes A M, Ferreira M G S. Prog Org Coat, 2002; 44: 111
[8] Montemor M F, Simoes A M, Ferreira M G S. Prog Org Coat, 2001; 43: 274
[9] Aramaki K. Corros Sci, 2007; 49: 1963
[10] Montemor M F, Trabelsi W, Zheludevich M, Ferreira M G S. Prog Org Coat, 2006; 57: 67
[11] Kong Gang, Lu J T, Zhong Wu Haijiang. J Rare Earths, 2009; 27: 164
[12] Jiang Z C, Cai R X, Zhang H S. Rare Earth Element Analytical Chemistry. Beijing: Science Press, 2000: 1
(江祖成, 蔡汝秀, 张华山. 稀土元素分析化学. 北京: 科学出版社, 2000: 1)
[13] Narmada P, Venkatasvara R MVenkatachari G, Appa Rao B V. Anti–Corros Methods Mater, 2006; 53: 310
[14] Sun Q X. Material Corrosion and Protection. Beijing: Metallurgical Industry Press, 2003: 1
(孙秋霞. 材料腐蚀与防护. 北京: 冶金工业出版社, 2003: 1)
[15] Arnott D R, Ryan N E, Hinton B R W, Sexton B A, Hughes A E. Appl Surf Sci, 1985; 22—23: 236
[16] Arenas M A, Damborenea J D. Corros Sci, 2006; 48: 3196
[17] Yu X W, Cao C N, Yao Z M, Zhou D R, Yin Z D. Corros Sci, 2001; 43: 1283
[18] Lu J T,Wu H J, Kong G, Che C S, Xu Q Y. Trans Nonferrous Met Soc Chin, 2006; 16: 1397
[19] Lu J T, Kong G, Chen J H, Xu Q Y, Sui R Z. Trans Nonferrous Met Soc Chin, 2003; 13: 145
[20] Yu H F, Wang J, Wang S S, Kuo Y M. J Phys Chem Solids, 2009; 70: 218
[21] Li S D, Jing L Q, Fu W, Yang L B, Xin B F, Fu H G. Mater Res Bull, 2007; 42: 203
[22] Taquchi H, Yamada S, Nagao M, Ichikawa Y, Tabata K. Mater Res Bull, 2002; 37: 69
[23] Nakamoto K. Infrared and Raman Spectra of Inorganic and Coordination Compounds. New York: Wiley, 1987: 1
[24] Mei Y, Nie Z R, Wang W. Spectrosc Spectral Anal, 2007, 27: 254
(梅 燕, 聂祚仁, 王 为. 光谱学与光谱分析, 2007; 27: 254)
[25] Briggs D. Handbook of X–Ray and Ultraviolet Photoelectron Spectroscopy. Cheshire: I CI Ltd Corporate Laboratory Runcorn, 1977: 1
[26] Yang L H, Li J Q, Yu X, Zhang M L. Appl Surf Sci, 2008; 255: 2338
[27] Scholes F H, Soste C, Hughes A E, Hardin S G, Curtis P R. Appl Surf Sci, 2006: 253: 1770
[28] Pourbiax M. Atlas of Electrochemical Equilibria in Aqueous Solutions. Houston, Tex: NACE, 1974: 1
[29] Guo Z H. Inhibitor and Its Application. Wuhan: Huazhong Institute of Technology Press, 1987: 1
(郭稚弧. 缓蚀剂及其应用. 武汉: 华中工学院出版社, 1987: 1)

[1] ZHANG Hong QI Huibin DU Cuiwei LI Xiaogang. CORROSION BEHAVIOR OF THE HOT--DIP GALVANIZED STEEL SHEET UNDER ADHESION OF AN ALKALINE MUD IN HOT--HUMID ENVIRONMENTS[J]. 金属学报, 2009, 45(3): 338-344.
[2] SHEN Shifei MA Weimin WEN Lei GUOYifen WANG Huadong YIN Ka. SOLID SOLUTION BEHAVIOR OF Y2−x−yGdxEuyO3 NANOPOWDERS DURING PROCESS OF PREPARATION AND THEIR LUMINESCENCE PROPERTIES[J]. 金属学报, 2009, 45(2): 227-231.
[3] LingLing Wang. Low-Temperature Combustion Synthesis Of Nanocrystalline Ce1-Xndxo2-X/2 Powders[J]. 金属学报, 2006, 42(5): 511-514 .
No Suggested Reading articles found!