[1] Keck, P. H., Golay, M. J. E.: Phys. Rev., 1953, 89, 1297．
[2] Cunnell, F. A., Wickham, R.: J. Sci. Instr., 1960, 37, 410．
[3] Bardsley, W.: Res. Appl. Ind., 1959, 12, 183．
[4] Oliver, B. F., Shafer. A. J. Trans. AIME. 1960． 218． 194．
[5] 京谷益次、绕木路南、西川和幸:日本金属学会志,1960,24,391．
[6] Smith, R. L., Rutherford, J. L.: Trans. AIME, 1957, 209, 478．
[7] Fischer, W. A., Spitzer, H., Hishinuma, M.: Arch. Eisenhuttenw., 1960, 365．
[8] Hillmann, H., Mager, A.: Z. Metallk., 1960, 51． 663．
[9] 中村卫:日本金属学会志,1962,26,391。
[10] Williams, W. M., Craig, G. B., Winegard, W. C.: Can. Mining Met. Bull., 1962, 55, 35．
[11] Simonsen, E. B.: J. Iron Steel Inst. (London). 1962, 200, 193．
[12] 大岡耕之、三村宏、矢野清之助等:日本金属学会志,1963,27,342．
[13] 何焕南、严荣华、俞柏华:改良低压燃烧法测定金属中微量碳,待发表.
[14] Chipman, J.: Basic Open Hearth Steelmaking, 2nd ed., (AIME, 1951) , p. 632．
[15] Hayes, A., Chipman, J.: Trans. AIME 1939, 135, 85．
[16] Hansen, M.: Constitution of Binary Alloys, 2nd ed., (McGraw-Hill, 1958) .
[17] Tiller, W. A.: J. Iron Steel Inst. (London), 1959, 192, 338．
[18] #12
[19] Pfann, W. G.: Zone Melting, (Wiley, 1958) , p. 16．
[20] Darken, L. S.: Basic Open Hearth Steelmaking, 2nd ed., (AIME, 1951) , p. 610．
[21] Seybolt, A. U.: J. Metals, 1954, 6, 979．
[22] Pfann, W. G.: Science, 1962, 135, 1101．
[23] Wroughton, D. M., Okress, E. C., Brace, P. H. et al.: J. Electrochem. Soc., 1952, 99, 205． |
