|
|
EFFECT OF Ce ON SOLIDIFICATION STRUCTURE OF LOW SULPHUR 16 Mn STEEL |
HU Hanqi; ZHONG Xueyou; HAN Qingyou (Beijing University of Iron and Steel Technology) (Manuscript received 21 November; 1984; revised manuscript 7 November; 1985) |
|
Cite this article:
HU Hanqi; ZHONG Xueyou; HAN Qingyou (Beijing University of Iron and Steel Technology) (Manuscript received 21 November; 1984; revised manuscript 7 November; 1985). EFFECT OF Ce ON SOLIDIFICATION STRUCTURE OF LOW SULPHUR 16 Mn STEEL. Acta Metall Sin, 1987, 23(3): 176-181.
|
Abstract Directional solidification technique was used to determine the effect of Ce on the solidification structure of low-sulphur 16Mn steel: The results show that addition of Ce increases the primary dendrite arm spacing and decreases the secondary dendrite arm spacing, the width of Columnar region, the size of equiaxed grains and the degree, of micro-segregation of Mn. This technique is expected to be used to reduce the detrimental influence of impurity particles on solidification structures.
|
Received: 18 March 1987
|
1 钟雪友,胡汉起,刘昌明.北京钢铁学院学报,1984;(3) :16 2 Flenings M C. Solidification Processing, New York: McGraw-Hill, 1974:42 3 Jacobi H, Schwerdtfeger K. Metall Trans. 1976; 7A: 811 4 塗嘉夫,大橋徹郎,広本键,北村修.鉄鋼,1980;62:614 5 胡汉起,钟雪友,力航.金属学报,1984;20:A247 6 胡汉起,钟雪友,力航.北京钢铁学院学报,1983;(1) :64 7 韩青有,胡汉起.北京钢铁学院学报,1985;(1) :1 |
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|