Please wait a minute...
Acta Metall Sin  2004, Vol. 40 Issue (2): 113-119     DOI:
Research Articles Current Issue | Archive | Adv Search |
Effect of Stress on Bainitic Transformation in Steel
XU Zuyao (T. Y. Hsu)
School of Materials Science and Engineering; Shanghai Jiaotong
Cite this article: 

XU Zuyao T. Y. Hsu. Effect of Stress on Bainitic Transformation in Steel. Acta Metall Sin, 2004, 40(2): 113-119 .

Download:  PDF(4911KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  Under the effect of stresses, the interphase energy may be reduced and probably the carbon atoms may redistribute, e.g., segregate at grain boundaries or other defects, and even the carbide may precipitate, resulting in the increase of the driving force for nucleation, in turn, marked raise of the nucleation rate and acceleration of incubation for bainitic transformation. The kinetics under stress is consistent with the kinetics model of ferrite and pearlite transformations under stress, i.e., the modified Avrami equation. Prior deformation of austenite may at first promote the bainite formation but may lead the occurrence of the mechanical stabilization of austenite at some later stage. The mechanism of the mechanical stabilization of austenite during bainite reaction may not be completely analogous with that during martensitic transformation, and it may only be the result from the hindrance of directional growth of bainite by dislocations formed in deformation, retarding the overall transformation kinetics. Model of the austenite mechanical stabilization is expected to be established.
Key words:  bainitic transformation      transformation under stress      transformation kinetics      
Received:  17 June 2003     
ZTFLH:  TG111.5  

URL: 

https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y2004/V40/I2/113

[1] Denis S, Gautier E, Simon A, Beck G. Mater Sci Technol, 1985; 1: 805
[2] Duckworth W E. J Met, 1966; 18: 915
[3] Guarnieri G J, Kanter J J. Trans ASM, 1948; 40: 1147
[4] Howard R T, Cohen M. Trans AIME, 1948; 176: 384
[5] Radcliffe S V, Rollason E C. J Iron Steel Inst, London, 1959; 191: 56
[6] Goodenow R H, Barkalow R H, Hehemann R F. Iron Steel Inst Spec Rep No. 93, London, 1969: 135
[7] Ericsson C E, Bhat M S, Parker E R, Zackay V F. Metall Trans, 1976; 7A: 1800
[8] Ko T. J Iron Steel last, London, 1953; 175: 16
[9] Hawkins M J, Barford J. J Iron Steel Inst, London, 1972; 210: 97
[10] Cottrell A H. J Iron Steel Inst, London, 1945; 151: 93
[11] Jepson M D, Thompson F C. J Iron Steel Inst, London, 1949; 162: 49
[12] Porter L E, Rosenthal P C. Acta Metall, 1959; 7: 504
[13] Radcliffe S V, Schatz M, Kulin S A. J Iron Steel Inst, London, 1963; 201: 143
[14] Nilan T G. TMS AIME, 1967; 239: 898
[15] Drozdov B Y, Kogan L I, Entin R I. Phys Met Metallogr, 1962; 13: 135
[16] Umemoto M, Bando S, Tamura I. In: Tamura I et al eds., Proc Int Conf Martensitic Transformations 1986, Sendal, Japan: The Jpn Inst Met, 1987: 595
[17] BhadeshiaH K D H, David S A, Vitek J M, Read R W. Mater Sci Technol, 1991; 7: 686
[18] Matsuzaki A, Bhadeshia H K D H, Harade H. Acta Metall Mater, 1994; 42: 1081
[19] Shipway P H, Bhadeshia H K D H. Mater Sci Eng, 1995; A201: 143
[20] Freiwillig R, Kudrman J, Chrska P. Metall Trans, 1976; 7A: 1091
[21] Olson G B, Cohen M. Metall Trans, 1976; 7A: 1897, 1905, 1915
[22] Xu Z Y (Hsu T Y). Martensitic Transformation and Martensite. 2nd ed., Beijing: Science Press, 1999: 593, 700(徐祖耀、马氏体相变与马氏体.第2版,北京:科学出版社,1999:593,700)
[23] Bhadeshia H K D H. Mater Sci Eng, 1999; A273-275: 58
[24] Bhadeshia H K D H. Bainit'e in Steels. 2nd ed., Cambridge: The Cambridge University Press, 2001: 207
[25] Tsazaki K, Ueda T, Fujiwara K, Maki T. In: Igata N, Kimpara I, Kishi T, Nakata E, Okura A, Uryn T, eds., New Materials and Processes for the Future, Proc 1st Japan Int SAMPE Symp and Exhibition, Chiba, Japan: Society for the Advancement of Materials and Process Engineering, 1989: 799
[26] Singh S B, Bhadeshia H K D H. Mater Sci Technol, 1996; 12: 610
[27] Yang J R, Huang C Y, Hsiech W H, Chiou C S. Mater Trans JIM, 1996; 37: 579
[28] Larn R H, Yang J R. Mater Sci Eng, 2000; A278: 278
[29] Lange W F Ⅲ, Enomoto M, Aaronson H I. Metall Trans, 1988; 19A: 427
[30] Hsu T Y (Xu Z Y), Mou Y W. Acta Metall, 1984; 32: 1469
[31] Brandes E A. Smithells Metals Reference Book. London: Butterworths, 1983: 15-2
[32] Grujicic M, Zhou X W. CALPHAD, 1993; 17: 383
[33] Feder J, Russell K C, Lothe J, Pound G M. Adv Phys, 1966; 15: 111
[34] Gao N, Liu Z, Yu Y P. Trans Mater Heat Treat, 2001; 22(3) : 1(高宁,刘庄,余永平.材料热处理学报,2001;22(3) :1)
[35] Ye J S. PhD Thesis, Shanghai Jiaotong University, 2003(叶健松.上海交通大学博士学位论文,2003)
[36] Hsu T Y (Xu Z Y), Chen W Z. Scr Metall, 1987; 21: 1289C
[1] WAN Xiangliang, HU Feng, CHENG Lin, HUANG Gang, ZHANG Guohong, WU Kaiming. Influence of Two-Step Bainite Transformation on Toughness in Medium-Carbon Micro/Nano-Structured Steel[J]. 金属学报, 2019, 55(12): 1503-1511.
[2] Shixin XU, Wei YU, Shujia LI, Kun WANG, Qisong SUN. Effects of Pre-Deformation Temperature on Nanobainite Transformation Kinetics and Microstructure[J]. 金属学报, 2018, 54(8): 1113-1121.
[3] WANG Changjun, SUN Xinjun, YONG Qilong, LI Zhaodong, ZHANG Xi, JIANG Lu. EFFECT OF BAINITIC TRANSFORMATION TEMPERATURE ON THE MICROSTRUCTURES AND MECHANICAL PROPERTIES OF THE HOT ROLLED TRIP STEEL CONTAINING Ti AND Mo AND ITS PRECIPITATION CHARACTERISTICS[J]. 金属学报, 2013, 29(4): 399-407.
[4] ZHANG Wangfeng; ZHU Jinhua; CAO Chunxiao. A New Model on the Law of Mixture Strength for Metastable Materials[J]. 金属学报, 2005, 41(1): 89-.
[5] J.W.Christian FRS(Department of Materials; Oxford University; Parks Road; Oxford OX1 3PH; UK). INTERFACES IN PHASE TRANSFORMATIONS[J]. 金属学报, 1997, 33(2): 150-156.
[6] LIU Zhenyu; WANG Guodong;(Department of Metal Forming; Northeastem University; Shenyang 110006) ZHANG Qiang (State Key Laboratory of RollingTechnology and Tandem Rolling Automation; Northeastern University; Shenyang110006). GRAIN SIZE PREDICTION AFTER CONTINUOUSLY COOLING TRANSFORMATION FROM DEFORMED AUSTENITE TO FERRITE[J]. 金属学报, 1995, 31(22): 468-172.
[7] FANG Hongsheng;WANG Jiajun(Tsinghua University; Beijing)(Manuscript received 20 July; 1994). SYMPATHETIC-LEDGEWISE MECHANISM OF BAINITIC TRANSFORMATION[J]. 金属学报, 1994, 30(11): 491-501.
[8] FANG Hongsheng;LI Chunming;WANG Jiajun Tsinghua University; Beijing100084. INITIAL α_1 PLATES AND THREE-DIMENSIONAL LEDGES OF BAINITE IN A Cu-Zn-Al ALLOY[J]. 金属学报, 1993, 29(9): 1-5.
[9] YANG Liu;LIU Shikai;YANG Ping Southwest Jiaotong University; Chengdu. CALCULATION OF BAINIT TRANSFORMATION KINETICS IN Fe-C-Si-Mn ALLOYS[J]. 金属学报, 1993, 29(1): 1-5.
[10] XU Zuyao;ZHOU Xiaowang T. Y. Hsu; Shanghai Jiaotong University Correspondent professor; Department of Materials Science; Shanghai Jiaotong University; Shanghai 200030. THERMODYNAMICS OF BAINITIC TRANSFORMATION IN A Cu-24at.-%Al ALL0Y[J]. 金属学报, 1992, 28(6): 26-28.
[11] LI Chao;WANG Jianli;LIU Jinfang Harbin Institute of Technology. INFLUENCE OF PRE-TRANSFORMED MARTENSITE ON KINETICS OF BAINITIC TRANSFORMATION IN GCr15 STEEL[J]. 金属学报, 1991, 27(1): 16-19.
[12] DONG Jianxin;CHEN Fumin;CHEN Jinming;LIU Wenxi Tianjin University. MICROSTRUCTURE AND REVERSE SHAPE MEMORY EFFECT IN A Cu-Zn-Al ALLOY[J]. 金属学报, 1990, 26(6): 81-83.
[13] LI Jian;SUN Fuyu Central Iron and Steel Research Institute; Ministry of Metallurgical Industry; Beijing. ON THE KINETICS OF DEFORMED AUSTENITE TO PROEUTECTOID FERRITE TRANSFORMATION[J]. 金属学报, 1990, 26(5): 66-69.
[14] SUN Enxi;YANG Dazhi;XU Zuyao;YANG Fumiug;ZHAO Ruwen Dalian Institute of Railway Dalian University of Technology Shanghai Jiaotong University Institute of Physics; Academia Sinica; Beijing professor. PULSED MAGNETIC FIELD-INDUCED MARTENSITIC TRANSFORMATION IN AN Fe-21Ni-4Mn ALLOY[J]. 金属学报, 1990, 26(4): 12-17.
[15] CAO Renhuan;MA Hongti Northest University of Technology;ShenyangYAN Zhenqi Professor;Depariment of Metallic Materials;Northeast University of Technology;Wenhua Rood;Shenyang. BAINITIC TRANSFORMATION IN LOW CARBON Mn-Nb-V AND Mn-Mo-Nb-V STEELS[J]. 金属学报, 1988, 24(2): 135-138.
No Suggested Reading articles found!