|
|
INFLUENCE OF P ON FRACTURE MORPHOLOGY OF Cr-Mn-Si STEEL WITH PEARLITE, BAINITE AND MARTENSITE STRUCTURES |
by ZHU Xun; LI Lidan (He bei Institute of Mecahnical and Electrical Engineering; Shijiazhuang); WANG Jucai (Taihang Machine Works) |
|
Cite this article:
by ZHU Xun; LI Lidan (He bei Institute of Mecahnical and Electrical Engineering; Shijiazhuang); WANG Jucai (Taihang Machine Works). INFLUENCE OF P ON FRACTURE MORPHOLOGY OF Cr-Mn-Si STEEL WITH PEARLITE, BAINITE AND MARTENSITE STRUCTURES. Acta Metall Sin, 1986, 22(6): 86-88.
|
Abstract The influence of P on impact toughness test and SEM observation was investigated on the 30CrMnSiA steel with pearlite, bainite and martensite-bainite mixed structures. Results showed that the cleavage element on the fracture surface increases and the impact toughness decreases as the increasing of P content. The intergranular fracture appeared till P up to 0.020%. An impact toughness sequence of various structures in the steel influenced by P may be arranged as: martensite+bainite>bainite>pearlite.
|
Received: 18 June 1986
|
1 Jokl, M.L.; Kameda, Jun.; McMahon, C.J., Jr.; Vitek, V., Met. Sci., 14 (1980) , 375. 2 Zia-Ebrahimi. F.; Krauss, G.o Metall. Trans., 14A (1983) , 1109. 3 朱勋;李立丹;王士本;王聚才,金属学报,21(1985) ,A 139. 4 Mulford, R.A.; McMahono C.J., Jr.; Pope, D.P.; Feng, H.C., Metall. Trans., 7A (1976) , 1183. |
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|