|
|
|
| ON THE HOT WORKABILITY OF LOW-CARBON Mn-Nb STEEL |
| LI Zhengsheng;ZHENG Zhilan;WANG Peixing;ZHANG Guanyun Shanghai Institute of Iron and Steel Research |
|
Cite this article:
LI Zhengsheng;ZHENG Zhilan;WANG Peixing;ZHANG Guanyun Shanghai Institute of Iron and Steel Research. ON THE HOT WORKABILITY OF LOW-CARBON Mn-Nb STEEL. Acta Metall Sin, 1985, 21(1): 118-128.
|
|
|
Abstract The hot torsion tests on low-carbon Mn-Nb steel were carried out of the es-tablishment of the constitutive equation of the power function and of the deter-mination of the relationship between flow stress of a steady state and hot ductility.An approach to the process of dynamic recrystallization was also made after con-sideration in the effect of strain accumulation.The influences of temperature,strain rate,Nb(CN)precipitation on the dynamic fractional softening have beenanalyzed.During dynamic recrystallization,the variation of activation energy orstress exponent reflects the precipitation of Nb(CN)to a certain extent.The effectof temperature and strain rate on the Nb(CN)precipitation may be quantitativelyillustrated by(?) which is defined as so-called precipitation exponent.Furthermore,the correlation among the strain rate sensitivity,temperature and shear strain hasalso been studied.
|
|
Received: 18 January 1985
|
1 Microalloying 75,Proc.of the Symp.,Oct.1-3,1975,Washington,D.C.,Sponsored by Union Carbide Corp.,etc,New York,Union Carbide Corp.,1977,p.2-192．
2 张作梅;李建华,金属学报,1(1956) ,87．
3 沈如璋;沈彼德;林有祚;王家禄;向德渊;叶崇发;李述创;栾凤英,钢铁,16(1981) ,№ 8,26．
4 Ed.Ballance,J.B.,The Hot Deformation of Austenite,New York,AIME,1977,p.1-409．
5 Sankar,J.;Hawkins,D.;McQueen,H.J.,Met.Technol.,6(1979) ,325．
6 Ouchi,C.;Okita,T.;Ichihara,T.;Ueno,Y.,Trans.Iron Steel Inst.Jpn.,20(1980) ,833．
7 Fields,D.S.;Backofen,W.A.,Proc.Am.Soc.Test.Mater.,57(1957) ,1259．
8 李正升;李缙继,金属和合金的变形抗力,《轧制理论文集》,冶金工业出版社,1982,p.299．
9 Sellars,C.M.;Tegart,W.J.McG.,Int.Metall.Rev.,17(1972) ,1．
10 Jonas,J.J.;Sellars,C.M.;Tegart,W.J.McG.,Int.Metall.Rev.,14(1969) ,1．
11 Tegart,W.J.McG.,Ductility,ASM,Metals Park,Ohio,1968,p.133．
12 Rossard,C.,The Microstructure and Design of Alloys,Proc.of the Conf.on the Strength of Metals and Alloys,3rd.Cambridge,Eng.,20-25 Aug.,1973,Sponsored by The Inst.Met.and the Iron and Steel Inst.,Vol.2,p.175． |
| No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
