TiAl合金板材轧制研究现状
收稿日期: 2021-10-15
修回日期: 2022-03-22
网络出版日期: 2022-05-20
基金资助
国家自然科学基金项目(51434007);国家自然科学基金项目(51371064)
Present Status for Rolling TiAl Alloy Sheet
Received date: 2021-10-15
Revised date: 2022-03-22
Online published: 2022-05-20
Supported by
National Nature Science Foundation of China(51434007);National Nature Science Foundation of China(51371064)
陈玉勇 , 叶园 , 孙剑飞 . TiAl合金板材轧制研究现状[J]. 金属学报, 2022 , 58(8) : 965 -978 . DOI: 10.11900/0412.1961.2021.00438
TiAl alloy sheets are important strategic structural materials in aerospace and automotive industry because of their high strength-to-weight ratio and high service temperature. However, the preparation of TiAl alloy sheets is difficult, especially the rolling of large-size high-performance TiAl alloy sheets. The preparation process, size, microstructure, and mechanical properties of hot-rolling TiAl alloy sheets using ingot metallurgy, powder metallurgy, direct rolling, and roll bonding approaches in recent years were reviewed. The features and existing problems of the above processing routes were discussed. Meanwhile, some suggestions on rolling large-size TiAl alloy sheets and its future development were proposed.
Key words： TiAl alloy sheet; rolling process; mechanical property; sheet size
| 1 | Appel F, Clemens H, Fischer F D. Modeling concepts for intermetallic titanium aluminides [J]. Prog. Mater. Sci., 2016, 81: 55 |
| 2 | Zhang W J, Reddy B V, Deevi S C. Physical properties of TiAl-base alloys [J]. Scr. Mater., 2001, 45: 645 |
| 3 | Das G, Kestler H, Clemens H, et al. Sheet gamma TiAl: Status and opportunities [J]. JOM, 2004, 56(11): 42 |
| 4 | Chen Y Y, Kong F T, Cui N. Preparation and microstructural analysis of TiAl alloy sheet [J]. Mater. China, 2015, 34: 379 |
| 4 | 陈玉勇, 孔凡涛, 崔 宁. TiAl合金板材的制备与组织分析 [J]. 中国材料进展, 2015, 34: 379 |
| 5 | Lin J P, Chen G L. Development of TiAl intermetallic based compound [J]. Mater. China, 2009, 28(1): 31 |
| 5 | 林均品, 陈国良. TiAl基金属间化合物的发展 [J]. 中国材料进展, 2009, 28(1): 31 |
| 6 | Zhang D M, Chen G Q, Han J C, et al. Research on gamma TiAl-based alloy sheet fabricated by EB-PVD [J]. J. Aeronaut. Mater., 2006, 26(4): 35 |
| 6 | 章德铭, 陈贵清, 韩杰才 等. EB-PVD制备γ-TiAl基合金薄板的研究 [J]. 航空材料学报, 2006, 26(4): 35 |
| 7 | Liu J P, Su Y Q, Luo L S, et al. Fabrication of wavy γ-TiAl based sheet with foil metallurgy [J]. Trans. Nonferrous Met. Soc. China, 2012, 22: 72 |
| 8 | Rivard J D K, Blue C A, Ott R D, et al. Advanced manufacturing technologies utilising high density infrared radiant heating [J]. Surf. Eng., 2004, 20: 220 |
| 9 | Chen Y Y, Yue H Y, Wang X P, et al. Selective electron beam melting of TiAl alloy: Microstructure evolution, phase transformation and microhardness [J]. Mater. Charact., 2018, 142: 584 |
| 10 | Yue H Y, Chen Y Y, Wang X P, et al. Effect of beam current on microstructure, phase, grain characteristic and mechanical properties of Ti-47Al-2Cr-2Nb alloy fabricated by selective electron beam melting [J]. J. Alloys Compd., 2018, 750: 617 |
| 11 | Chen Y Y, Yue H Y, Wang X P. Microstructure, texture and tensile property as a function of scanning speed of Ti-47Al-2Cr-2Nb alloy fabricated by selective electron beam melting [J]. Mater. Sci. Eng., 2018, A713: 195 |
| 12 | Yue H Y, Chen Y Y, Wang X P, et al. Microstructure, texture and tensile properties of Ti-47Al-2Cr-2Nb alloy produced by selective electron beam melting [J]. J. Alloys Compd., 2018, 766: 450 |
| 13 | Tomita M, Noguchi Y. Miti program on high temperature intermetallics [J]. Trans. Nonferrous Met. Soc. China, 1999, 9(): 346 |
| 14 | Semiatin S L, Seetharaman V. Deformation and microstructure development during hot-pack rolling of a near-gamma titanium aluminide alloy [J]. Metall. Mater. Trans., 1995, 26A: 371 |
| 15 | Clemens H, Kestler H. Processing and applications of intermetallic γ‐TiAl‐based alloys [J]. Adv. Eng. Mater., 2000, 2: 551 |
| 16 | Zhang G C. TiAl intermetallic sheet isothermal rolling equipment and technology [J]. Titanium Alloy. Inf., 1996, (1): 7 |
| 16 | 张功才. TiAl金属间化合物薄板的等温轧制设备及其工艺 [J]. 钛合金信息, 1996, (1): 7 |
| 17 | Cui X P. Microstructure and mechanical properties of micro-laminated TiB2-TiAl composite sheets prepared by roll bonding and reaction annealing [D]. Harbin: Harbin Institute of Technology, 2012 |
| 17 | 崔喜平. 轧制及反应退火制备微叠层TiB2-TiAl复合材料板组织与性能 [D]. 哈尔滨: 哈尔滨工业大学, 2012 |
| 18 | Clemens H, Glatz W, Eberhardt N, et al. Processing, properties and applications of gamma titanium aluminide sheet and foil materials [J]. MRS Online Proc. Lib., 1996, 460: 29 |
| 19 | Zhou H T, Kong F T, Wang X P, et al. High strength in high Nb containing TiAl alloy sheet with fine duplex microstructure produced by hot pack rolling [J]. J. Alloys Compd., 2017, 695: 3495 |
| 20 | Zhou H T, Kong F T, Wu K, et al. Hot pack rolling nearly lamellar Ti-44Al-8Nb-(W, B, Y) alloy with different rolling reductions: Lamellar colonies evolution and tensile properties [J]. Mater. Des., 2017, 121: 202 |
| 21 | Liu H W. Hot working, structure and properties of (γ + α2 + B2) multiphase TiAl alloy [D]. Qinhuangdao: Yanshan University, 2017 |
| 21 | 刘宏武. (γ + α2 + B2)三相TiAl合金热加工特性及组织性能研究 [D]. 秦皇岛: 燕山大学, 2017 |
| 22 | Zhang Y, Wang X P, Kong F T, et al. A high-performance β-stabilized Ti-43Al-9V-0.2Y alloy sheet with a nano-scaled antiphase domain [J]. Mater. Lett., 2018, 214: 182 |
| 23 | Zhang Y, Wang X P, Kong F T, et al. A high-performance β-solidifying TiAl alloy sheet: Multi-type lamellar microstructure and phase transformation [J]. Mater. Charact., 2018, 138: 136 |
| 24 | Gao S B, Liang Y F, Ye T, et al. In-situ control of microstructure and mechanical properties during hot rolling of high-Nb TiAl alloy [J]. Materialia, 2018, 1: 229 |
| 25 | Liu F X, He Y H, Liu Y, et al. Present status and future prospects for PM TiAl-based alloy sheet [J]. Rare Met. Mater. Eng., 2005, 34: 169 |
| 25 | 刘峰晓, 贺跃辉, 刘 咏 等. 粉末冶金制备TiAl基合金板材的研究现状及趋势 [J]. 稀有金属材料与工程, 2005, 34: 169 |
| 26 | Yang F, Kong F T, Chen Y Y, et al. Manufacture and present status of TiAl alloy sheet [J]. J. Mater. Eng., 2010, (5): 96 |
| 26 | 杨 非, 孔凡涛, 陈玉勇 等. TiAl合金板材的制备及研究现状 [J]. 材料工程, 2010, (5): 96 |
| 27 | Xu L, Bai C G, Wang G, et al. Manufacturing of γ-TiAl sheet by hot packed rolling of powder metallurgy preform [J]. Titanium Ind. Prog., 2011, 28(5): 17 |
| 27 | 徐 磊, 柏春光, 王 刚 等. 包覆热轧制备粉末冶金TiAl合金板材及热加工行为研究 [J]. 钛工业进展, 2011, 28(5): 17 |
| 28 | Liu Y, Liang X P, Liu B, et al. Investigations on processing powder metallurgical high-Nb TiAl alloy sheets [J]. Intermetallics, 2014, 55: 80 |
| 29 | Li H Z, Qi Y L, Liang X P, et al. Microstructure and high temperature mechanical properties of powder metallurgical Ti-45Al-7Nb-0.3W alloy sheets [J]. Mater. Des., 2016, 106: 90 |
| 30 | Zhang D D. Preparation of powder TiAl alloy sheet and study on microstructure and properties [D]. Harbin: Harbin Institute of Technology, 2020 |
| 30 | 张冬冬. 粉末TiAl合金板材的制备及其组织性能研究 [D]. 哈尔滨: 哈尔滨工业大学, 2020 |
| 31 | Matsuo M. Developments in processing technology of gamma titanium aluminides for potential application to airframe structures [J]. ISIJ Int., 1991, 31: 1212 |
| 32 | Hanamura T, Hashimoto K. Improvement of microstructure and mechanical properties in TiB2-doped TiAl alloy by direct sheet casting [J]. Mater. Trans. JIM, 1998, 39: 724 |
| 33 | Shen Z Z. The Investigation of manufacturing, microstructure, properties of high Nb-TiAl alloy sheet [D]. Beijing: University of Science and Technology Beijing, 2016 |
| 33 | 沈正章. 高Nb-TiAl合金板材制备及组织性能研究 [D]. 北京: 北京科技大学, 2016 |
| 34 | Zeng S W. Research on hot deformation and oxidation behavior of TiAl containing Nb, Mo [D]. Beijing: University of Science and Technology Beijing, 2016 |
| 34 | 曾尚武. 含铌、钼TiAl合金热变形及氧化行为研究 [D]. 北京: 北京科技大学, 2016 |
| 35 | Chen L. Study on microstructure optimization and creep properties of TiAl alloy containing β stable element [D]. Beijing: University of Science and Technology Beijing, 2021 |
| 35 | 陈 林. 含β稳定元素TiAl合金组织优化及其蠕变性能研究 [D]. 北京: 北京科技大学, 2021 |
| 36 | Li T R, Liu G H, Xu M, et al. High temperature deformation and control of homogeneous microstructure during hot pack rolling of Ti-44Al-5Nb-(Mo, V, B) alloys: The impact on mechanical properties [J]. Mater. Sci. Eng., 2019, A751: 1 |
| 37 | Luo J G, Acoff V L. Processing gamma-based TiAl sheet materials by cyclic cold roll bonding and annealing of elemental titanium and aluminum foils [J]. Mater. Sci. Eng., 2006, A433: 334 |
| 38 | Zhang R G, Acoff V L. Processing sheet materials by accumulative roll bonding and reaction annealing from Ti/Al/Nb elemental foils [J]. Mater. Sci. Eng., 2007, A463: 67 |
| 39 | Chaudhari G P, Acoff V L. Titanium aluminide sheets made using roll bonding and reaction annealing [J]. Intermetallics, 2010, 18: 472 |
| 40 | Kong F T, Chen Y Y. Preparation of γ-TiAl/TC4 composite sheet and its microstructure and properties [J]. Rare Met. Mater. Eng., 2009, 38: 1484 |
| 40 | 孔凡涛, 陈玉勇. γ-TiAl/TC4复合板材的制备及组织性能研究 [J]. 稀有金属材料与工程, 2009, 38: 1484 |
| 41 | Bian Z W. Study of process of rolling and heat treatment on multilaminated Ti-B4C/Al sheets [D] Harbin: Harbin Institute of Technology, 2010 |
| 41 | 边卓伟. 多层Ti-(B4C/Al)板轧制和热处理工艺研究 [D]. 哈尔滨: 哈尔滨工业大学, 2010 |
| 42 | Wang Y. Microstructure and mechanical properties of titanium aluminide composite sheet prepared by roll bonding and reactive annealing [D]. Harbin: Harbin Institute of Technology, 2011 |
| 42 | 王 银. 叠轧及热处理制备钛铝基复合材料板的微观组织与性能 [D]. 哈尔滨: 哈尔滨工业大学, 2011 |
| 43 | Sun W, Yang F, Kong F T, et al. Interface characteristics of Ti6Al4V-TiAl metal-intermetallic laminate (MIL) composites prepared by a novel hot-pack rolling [J]. Mater Charact., 2018, 144: 173 |
| 44 | Ren L B, Wang J, Wang H W, et al. A method for preparing titanium alloy sheet by roll bonding using steel plate can [P]. Chin Pat, 201110104578.8, 2011 |
| 44 | 任连宝, 王 俭, 王红武 等. 一种钢板包覆叠轧制备钛合金薄板的方法 [P]. 中国专利, 201110104578.8, 2011) |
/
| 〈 |
|
〉 |
