块体非晶合金的3D打印成形研究进展
收稿日期: 2020-11-09
修回日期: 2021-01-24
网络出版日期: 2021-03-01
基金资助
国家自然科学基金项目(51971097)
Recent Advances on 3D Printed Bulk Metallic Glasses
Received date: 2020-11-09
Revised date: 2021-01-24
Online published: 2021-03-01
Supported by
National Natural Science Foundation of China(51971097)
李宁 , 黄信 . 块体非晶合金的3D打印成形研究进展[J]. 金属学报, 2021 , 57(4) : 529 -541 . DOI: 10.11900/0412.1961.2020.00450
The application of bulk metallic glasses (BMGs) as structural materials not only involves the challenge of room temperature brittleness but also bottlenecks related to formation and manufacturing. Solving these issues has become one of the research hotspots and difficulties in the material field recently. The recently developed 3D printing technology has gradually become one of the key methods to solve the existing difficulties of BMGs to realize their engineering applications. However, because BMGs have a completely different atomic structure than crystalline materials, the basic theories of material microstructure evolution, defect formation and suppression, and performance adjustment in 3D printing are completely different. The in-depth analysis of the abovementioned scientific issues is very important for the development of BMG 3D printing technology. This article is mainly focused on the research trends at home and abroad with a comprehensive analysis of the above problems and looks forward to the development trends of 3D printing technology.
Key words： bulk metallic glass; 3D printing; microstructure; mechanical property
| 1 | Klement W, Willens R H, Duwez P. Non-crystalline structure in solidified gold-silicon alloys [J]. Nature, 1960, 187: 869 |
| 2 | Nieh T G, Wadsworth J. Homogeneous deformation of bulk metallic glasses [J]. Scr. Mater., 2006, 54: 387 |
| 3 | Tian L, Cheng Y Q, Shan Z W, et al. Approaching the ideal elastic limit of metallic glasses [J]. Nat. Commun., 2012, 3: 609 |
| 4 | Wang J F, Li R, Hua N B, et al. Co-based ternary bulk metallic glasses with ultrahigh strength and plasticity [J]. J. Mater. Res., 2011, 26: 2072 |
| 5 | Cao L F. Research on the preparation of Fe84(NbV)7B9 nanocrystalline soft magnetic materials and related fundamental theory [D]. Changsha: Central South University, 2006 |
| 5 | 曹玲飞. Fe84(NbV)7B9纳米晶软磁材料的制备及其相关基础问题的研究 [D]. 长沙: 中南大学, 2006 |
| 6 | Pan J, Zhang M, Chen Q, et al. Study of anticorrosion ability of Fe43.7Co7.3Cr14.7Mo12.6C15.5B4.3Y1.9 bulk metallic glass in strong acid solutions [J]. Rare Met. Mater Eng., 2008, 37(suppl.4): 805 |
| 6 | 潘 杰, 张 猛, 谌 祺等. FeCoCrMoCBY块体非晶合金在强酸介质中的耐蚀性能 [J]. 稀有金属材料与工程, 2008, 37(): 805 |
| 7 | Suryanarayana C, Inoue A. Bulk Metallic Glass [M]. Boca Raton: CRC Press, 2011: 1 |
| 8 | Schroers J. Processing of bulk metallic glass [J]. Adv. Mater., 2010, 22: 1566 |
| 9 | Schroers J, Paton N. Amorphous metal alloys form like plastics [J]. Adv. Mater. Process., 2006, 164: 61 |
| 10 | Saotome Y, Miwa S, Zhang T, et al. The micro-formability of Zr-based amorphous alloys in the supercooled liquid state and their application to micro-dies [J]. J. Mater. Process. Technol., 2001, 113: 64 |
| 11 | Gu D D, Hagedorn Y C, Meiners W, et al. Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium [J]. Acta Mater., 2012, 60: 3849 |
| 12 | Pauly S, L?ber L, Petters R, et al. Processing metallic glasses by selective laser melting [J]. Mater. Today, 2013, 16: 37 |
| 13 | Katakam S, Hwang J Y, Paital S, et al. In situ laser synthesis of Fe-based amorphous matrix composite coating on structural steel [J]. Metall. Mater. Trans., 2012, 43A: 4957 |
| 14 | Zheng B, Zhou Y, Smugeresky J E, et al. Processing and behavior of Fe-based metallic glass components via laser-engineered net shaping [J]. Metall. Mater. Trans., 2009, 40A: 1235 |
| 15 | Laser engineered net shaping, LENS [EB/OL]. |
| 16 | Gibson M A, Mykulowycz N M, Shim J, et al. 3D printing metals like thermoplastics: Fused filament fabrication of metallic glasses [J]. Mater. Today, 2018, 21: 697 |
| 17 | Zhang C, Wang W, Li Y C, et al. 3D printing of Fe-based bulk metallic glasses and composites with large dimensions and enhanced toughness by thermal spraying [J]. J. Mater. Chem., 2018, 6A: 6800 |
| 18 | Gorodesky N, Sedghani‐Cohen S, Altman M, et al. Concurrent formation of metallic glass during laser forward transfer 3D printing [J]. Adv. Funct. Mater., 2020, 30: 2001260 |
| 19 | Visser C W, Pohl R, Sun C, et al. Toward 3D printing of pure metals by laser-induced forward transfer [J]. Adv. Mater., 2015, 27: 4087 |
| 20 | Duoss E. Direct ink writing of bulk metallic glasses [R/OL]. , 2017 |
| 21 | Li X P, Kang C W, Huang H, et al. Selective laser melting of an Al86Ni6Y4.5Co2La1.5 metallic glass: Processing, microstructure evolution and mechanical properties [J]. Mater. Sci. Eng., 2014, A606: 370 |
| 22 | Ouyang D, Li N, Xing W, et al. 3D printing of crack-free high strength Zr-based bulk metallic glass composite by selective laser melting [J]. Intermetallics, 2017, 90: 128 |
| 23 | Deng L, Wang S H, Wang P, et al. Selective laser melting of a Ti-based bulk metallic glass [J]. Mater. Lett., 2018, 212: 346 |
| 24 | Ouyang D, Xing W, Li N, et al. Structural evolutions in 3D-printed Fe-based metallic glass fabricated by selective laser melting [J]. Addit. Manuf., 2018, 23: 246 |
| 25 | Bordeenithikasem P, Stolpe M, Elsen A, et al. Glass forming ability, flexural strength, and wear properties of additively manufactured Zr-based bulk metallic glasses produced through laser powder bed fusion [J]. Addit. Manuf., 2018, 21: 312 |
| 26 | Li N, Zhang J J, Xing W, et al. 3D printing of Fe-based bulk metallic glass composites with combined high strength and fracture toughness [J]. Mater. Des., 2018, 143: 285 |
| 27 | Mahbooba Z, Thorsson L, Unosson M, et al. Additive manufacturing of an iron-based bulk metallic glass larger than the critical casting thickness [J]. Appl. Mater. Today, 2018, 11: 264 |
| 28 | Hofmann D C, Bordeenithikasem P, Pate A, et al. Developing processing parameters and characterizing microstructure and properties of an additively manufactured FeCrMoBC metallic glass forming alloy [J]. Adv. Eng. Mater., 2018, 20: 1800433 |
| 29 | Jung H Y, Choi S J, Prashanth K G, et al. Fabrication of Fe-based bulk metallic glass by selective laser melting: A parameter study [J]. Mater. Des., 2015, 86: 703 |
| 30 | Wang L, Wang H, Liu Y K, et al. Selective laser melting helps fabricate record-large bulk metallic glass: Experiments, simulation and demonstrative part [J]. J. Alloys Compd., 2019, 808: 151731 |
| 31 | Zhang C, Li X M, Liu S Q, et al. 3D printing of Zr-based bulk metallic glasses and components for potential biomedical applications [J]. J. Alloys Compd., 2019, 790: 963 |
| 32 | Xing W, Ouyang D, Chen Z, et al. Effect of energy density on defect evolution in 3D printed Zr-based metallic glasses by selective laser melting [J]. Sci. China Phys. Mech. Astron., 2019, 63: 226111 |
| 33 | Li X P, Roberts M P, O'Keeffe S, et al. Selective laser melting of Zr-based bulk metallic glasses: Processing, microstructure and mechanical properties [J]. Mater. Des., 2016, 112: 217 |
| 34 | Shen Y Y, Li Y Q, Chen C, et al. 3D printing of large, complex metallic glass structures [J]. Mater. Des., 2017, 117: 213 |
| 35 | Sun H, Flores K M. Laser deposition of a Cu-based metallic glass powder on a Zr-based glass substrate [J]. J. Mater. Res., 2011, 23: 2692 |
| 36 | ??rodowski, Wysocki B, Wróblewski R, et al. New approach to amorphization of alloys with low glass forming ability via selective laser melting [J]. J. Alloys Compd., 2019, 771: 769 |
| 37 | Yang C, Zhang C, Xing W, et al. 3D printing of Zr-based bulk metallic glasses with complex geometries and enhanced catalytic properties [J]. Intermetallics, 2018, 94: 22 |
| 38 | Luo Y, Xing L L, Jiang Y D, et al. Additive manufactured large Zr-based bulk metallic glass composites with desired deformation ability and corrosion resistance [J]. Materials (Basel), 2020, 13: 597 |
| 39 | Pacheco V, Karlsson D, Marattukalam J J, et al. Thermal stability and crystallization of a Zr-based metallic glass produced by suction casting and selective laser melting [J]. J. Alloys Compd., 2020, 825: 153995 |
| 40 | Marattukalam J J, Pacheco V, Karlsson D, et al. Development of process parameters for selective laser melting of a Zr-based bulk metallic glass [J]. Addit. Manuf., 2020, 33: 101124 |
| 41 | Lu X Y, Nursulton M, Du Y L, et al. Structural and mechanical characteristics of Cu50Zr43Al7 bulk metallic glass fabricated by selective laser melting [J]. Materials (Basel), 2019, 12: 75 |
| 42 | Gao X D, Liu Z L, Li J H, et al. Selective laser melting of CuZr-based metallic glass composites [J]. Mater. Lett., 2020, 259: 126724 |
| 43 | Pauly S, Schricker C, Scudino S, et al. Processing a glass-forming Zr-based alloy by selective laser melting [J]. Mater. Des., 2017, 135: 133 |
| 44 | Zhai L L, Lu Y Z, Wang L, et al. Quantitative evaluation of hidden hierarchical pores in laser additive manufactured bulk metallic glasses via computed tomography [J]. Mater. Lett., 2020, 265: 127376 |
| 45 | Zhai L L, Lu Y Z, Zhao X Y, et al. High-throughput screening of laser additive manufactured metallic glass via ultrasonic wave [J]. Sci. Rep., 2019, 9: 17660 |
| 46 | Xu H D, Lu Y Z, Liu Z H, et al. Laser 3D printing of Zr-based bulk metallic glass [J]. J. Manuf. Process., 2019, 39: 102 |
| 47 | Lin X, Zhang Y Y, Yang G L, et al. Microstructure and compressive/tensile characteristic of large size Zr-based bulk metallic glass prepared by laser solid forming [J]. J. Mater. Sci. Technol., 2019, 35: 328 |
| 48 | Yang G L, Lin X, Liu F C, et al. Laser solid forming Zr-based bulk metallic glass [J]. Intermetallics, 2012, 22: 110 |
| 49 | Su S, Lu Y Z. Laser directed energy deposition of Zr-based bulk metallic glass composite with tensile strength [J]. Mater. Lett., 2019, 247: 79 |
| 50 | Liang S X, Wang X Q, Zhang W C, et al. Selective laser melting manufactured porous Fe-based metallic glass matrix composite with remarkable catalytic activity and reusability [J]. Appl. Mater. Today, 2020, 19: 100543 |
| 51 | Zhang P C, Ouyang D, Liu L. Enhanced mechanical properties of 3D printed Zr-based BMG composite reinforced with Ta precipitates [J]. J. Alloys Compd., 2019, 803: 476 |
| 52 | Zhu Q J, Qu S Y, Wang X H, et al. Synthesis of Fe-based amorphous composite coatings with low purity materials by laser cladding [J]. Appl. Surf. Sci., 2007, 253: 7060 |
| 53 | Nong X D, Zhou X L, Ren Y X. Fabrication and characterization of Fe-based metallic glasses by Selective Laser Melting [J]. Opt. Laser Technol., 2019, 109: 20 |
| 54 | Li X P, Kang C W, Huang H, et al. The role of a low-energy-density re-scan in fabricating crack-free Al85Ni5Y6Co2Fe2 bulk metallic glass composites via selective laser melting [J]. Mater. Des., 2014, 63: 407 |
| 55 | Xie F, Chen Q J, Gao J W. Brittle-ductile transition in laser 3D printing of Fe-based bulk metallic glass composites [J]. Metals, 2019, 9: 78 |
| 56 | Zhang Y, Liu H S, Mo J Y, et al. Atomic-level crystallization in selective laser melting fabricated Zr-based metallic glasses [J]. Phys. Chem. Chem. Phys., 2019, 21: 12406 |
| 57 | Zhang Y, Liu H S, Mo J Y, et al. Atomic-scale structural evolution in selective laser melting of Cu50Zr50 metallic glass [J]. Comput. Mater. Sci., 2018, 150: 62 |
| 58 | Guo S, Wang M, Lin X, et al. Research on the crystallization behavior occurred in the process of preparing bulk metallic glass with selective laser melting [J]. Mater. Res. Express, 2019, 6: 066582 |
| 59 | Simchi A, Pohl H. Effects of laser sintering processing parameters on the microstructure and densification of iron powder [J]. Mater. Sci. Eng., 2003, A359: 119 |
| 60 | Zhang Y Y, Lin X, Wei L, et al. Influence of powder size on the crystallization behavior during laser solid forming Zr55Cu30Al10Ni5 bulk amorphous alloy [J]. Intermetallics, 2016, 76: 1 |
| 61 | Zhang B, Li Y T, Bai Q. Defect formation mechanisms in selective laser melting: A review [J]. Chin. J. Mech. Eng., 2017, 30: 515 |
| 62 | Qiu C L, Panwisawas C, Ward M, et al. On the role of melt flow into the surface structure and porosity development during selective laser melting [J]. Acta Mater., 2015, 96: 72 |
| 63 | Ouyang D. Fabrication, structure and properties of 3D printed amorphous alloys by selective laser melting [D]. Wuhan: Huazhong University of Science and Technology, 2019 |
| 63 | 欧阳迪. 激光选区熔化3D打印非晶合金的制备、结构与性能研究 [D]. 武汉: 华中科技大学, 2019 |
| 64 | Best J P, Ostergaard H E, Li B S, et al. Fracture and fatigue behaviour of a laser additive manufactured Zr-based bulk metallic glass [J]. Addit. Manuf., 2020, 36: 101416 |
/
| 〈 |
|
〉 |
