电磁场下近液相线高温合金熔体处理非枝晶组织的形成
高中堂, 男, 1983年生, 博士生
修回日期: 2014-03-31
网络出版日期: 2014-12-25
基金资助
*国家重点基础研究发展计划项目 2011CB610404, 高等学校学科创新引智计划项目 B08040和凝固技术国家重点实验室基金自主开放课题项目62-TP-2011资助
EFFECT OF ELECTROMAGNETIC MELT TREATMENT NEAR LIQUIDUS ON THE FORMATION OF NON-DENDRITE MICROSTRUCTURE OF SUPERALLOY
Revised date: 2014-03-31
Online published: 2014-12-25
Supported by
Supported by National Basic Research Program of China (No.2011CB610404), Program of Introducing Talents of Discipline to Universities (No.B08040) and Research Found of the State Key Laboratory of Solidification Processing China (No.62-TP-2011)
采用电磁场近液相线熔体保温工艺对Ni-20Cr-18W (质量分数, %)高温合金进行处理, 获得了平均晶粒尺寸d=127 μm, 凝固组织为球状晶粒的60 kg铸锭. 借助于OM, SEM和EBSD等手段, 针对所获得的电磁场对原子团簇、界面稳定化以及树枝晶向球状晶转变的研究结果, 从形核热力学方面对近液相线处理后高温合金铸锭晶粒细化机制进行了研究. 结果表明: 该工艺能够细化凝固组织; 其细化机制为原子团簇与球晶分别作为后续凝固过程中的形核核心, 促进凝固过程中晶粒形核, 细化组织. 此外, 在改善熔体宏观温度场均匀性的基础上, 电磁场促进了球晶稳定化以及树枝晶向球状晶的转变, 并提高其形核率.
高中堂 , 胡锐 , 王军 , 杨劼人 , 李金山 . 电磁场下近液相线高温合金熔体处理非枝晶组织的形成[J]. 金属学报, 2014 , 50(12) : 1471 -1477 . DOI: 10.11900/0412.1961.2014.00153
The effects of electromagnetic field and melt treatment near liquidus on the grain refinement of the Ni-20Cr-18W (mass fraction, %) superalloy have been studied. The average grain size of 60 kg ingot can be refined to 127 μm and the grains are both ?ne and globular. Based on the effect of electromagnetic field on atomic cluster, interface stability and transformation from dendritic grain to globular grain, the mechanism of grain refinement has been studied from the aspect of nucleation thermodynamics by OM, SEM, EBSD. The results show that electromagnetic melt treatment near liquidus results in signi?cant re?nement. The grain refinement can be attributed to the mechanism that atomic clusters and globular structures can become the nucleus when the initial undercooling reaches certain level. Electromagnetic field not only improves homogeneity of the macroscopic temperature field, but also plays a positive role in interface stability and dendritic to globular transformation, which increases the nucleation rate.
| [1] | Kotadia H R, Zhang H, Fan Z. Mater Lett, 2010; 64: 671 |
| [2] | Haghayehi R, Nastac L. Mater Lett, 2011; 65: 3230 |
| [3] | Xiong Y H, Li P J, Yang A M, Yan W D, Zeng D B, Liu L. Acta Metall Sin, 2002; 38: 529 |
| [3] | (熊玉华, 李培杰, 杨爱民, 严卫东, 曾大本, 刘 林. 金属学报, 2002; 38: 529) |
| [4] | Zhou Y H. Solidification Technology. Beijing: Mechanical Industry Press, 1998: 55 |
| [4] | (周尧和. 凝固技术. 北京: 机械出版社, 1998: 55) |
| [5] | Xia K, Tausing G. Mater Sci Eng, 1998; A246: 1 |
| [6] | Li X F, Zhang F, Zu F Q, Lv X, Zhao Z X, Yang D D. J Alloys Compd, 2010; 505: 472 |
| [7] | Wang Y Q, Wu Y Q, Liu J T, Bian X F. Chin Phy Lett, 2006; 23: 2513 |
| [8] | Men H, Jiang B, Fan Z. Acta Mater, 2010; 58: 6526 |
| [9] | Alirezar K, Miwa K J, Toshiyuki K S. Trans Nonferrous Met Soc China, 1998; 29: 1477 |
| [10] | Du Y Y, Lu Y P, Wang T M, Li T J, Zhang G L. Proc Eng, 2012; 27: 1129 |
| [11] | Wang J S, Xue Q G, Chang G W, Tang Y, Wang J Z, Cang D Q. J Univ Sci Technol Beijing, 2004; 11: 123 |
| [12] | Haghayeghi R, Nastac L. Mater Lett, 2011; 65: 3230 |
| [13] | Zhang X L, Li T J, Teng H T, Me S S, Jin J Z. Mater Sci Eng, 2007; A475: 194 |
| [14] | Wannasin J, Canyook R, Wisutmethangoon S, Flemings M C. Acta Mater, 2013; 61: 3897 |
| [15] | Li Q S, Song C J, Li H B, Zhai Q J. Mater Sci Eng, 2007; A466: 101 |
| [16] | Zi B T, Ba Q X, Cui J Z, Xu G M. Scr Mater, 2000; 43: 377 |
| [17] | He S X, Wang J, Zhou Y H. Acta Metall Sin, 2002; 38: 379 |
| [17] | (何树先, 王 俊, 周尧和. 金属学报, 2002; 38: 379) |
| [18] | Liu Y, Hu R, Li J S. Mater Sci Eng, 2009; A508: 141 |
| [19] | Yue J T, Voltmer W. J Cryst Growth, 1975; 29: 32 |
| [20] | Li M J, Takuya T, Naoki O, Kenji M W. J Alloys Compd, 2009; 487: 187 |
| [21] | Shibayan R, Satyam S, Tamirisa K. Acta Mater, 2011; 59: 5494 |
| [22] | Zuo Y B, Cui J Z, Zhao H T. J Mater Sci, 2012; 47: 5501 |
| [23] | Wang B, Yang Y S, Zhou J X, Tong W H. Rare Met Mater Eng, 2009; 38: 519 |
| [23] | (汪 彬, 杨院生, 周吉学, 童文辉. 稀有金属材料与工程, 2009; 38: 519) |
| [24] | Jia P, Wang E G, Lu L, He J C. Acta Metall Sin, 2013; 49: 1573 |
| [24] | (贾 鹏, 王恩刚, 鲁 辉, 赫冀成. 金属学报, 2013; 49: 1573) |
| [25] | Fan Z, Wang Y, Xia M, Arumuganathar S. Acta Mater, 2009; 57: 4891 |
| [26] | Li T, Lin X, Huang W D. Acta Mater, 2006; 54: 4815 |
| [27] | Lin X, Tong L L, Zhao L N, Wanng L L, Wang M, Huang W D. Trans Nonferrous Met Soc China, 2010; 20: S826 |
| [28] | Dong J, Lu G M, Ren Q F, Cui J Z. Acta Metall Sin, 2002; 38: 203 |
| [28] | (董 杰, 路贵民, 任栖峰, 崔建中. 金属学报, 2002; 38: 203) |
| [29] | Flemings M C. Solidification Processing. New York: McGraw Hill Book Company, 1974: 42 |
| [30] | Huang Y, Liu S, Lu D Y, Zhou Y H, Cheng G S, Zhang F S. Chin Space Sci Technol, 1989; 9(1): 7 |
| [30] | (黄 焰, 刘 山, 鲁德洋, 周尧和, 程功善, 张福生. 中国空间科学技术, 1989; 9(1): 7) |
| [31] | Shu D, Sun B D, Mi J, Gran P S. Acta Mater, 2011; 59: 2 |
/
| 〈 |
|
〉 |
