含Er高Nb TiAl基合金抗循环氧化性能研究

宫子琪; 陈子勇; 柴丽华; 相志磊; 聂祚仁

doi:10.3724/SP.J.1037.2013.00394

金属学报 >

2013 , Vol. 49 >Issue 11: 1369 - 1373

DOI: https://doi.org/10.3724/SP.J.1037.2013.00394

论文

含Er高Nb TiAl基合金抗循环氧化性能研究

宫子琪 ,
陈子勇 ,
柴丽华 ,
相志磊 ,
聂祚仁

展开

北京工业大学材料科学与工程学院, 北京 100124

宫子琪, 男, 1987年生, 博士生

收稿日期: 2013-07-10

修回日期: 2013-08-04

网络出版日期: 2013-11-11

基金资助

北京市教委高层次人才培养项目00900054R8002和北京工业大学博士科研启动基金项目009000543113527资助

收起

STUDY ON CYCLIC OXIDATION RESISTANCE OF HIGH NIOBIUM CONTAINING TiAl BASE ALLOY WITH ERBIUM

GONG Ziqi ,
CHEN Ziyong ,
CHAI Lihua ,
XIANG Zhilei ,
NIE Zuoren

Expand

Department of Materials Science and Engineering, Beijing University of Technology, Beijing 100124

Received date: 2013-07-10

Revised date: 2013-08-04

Online published: 2013-11-11

Fold

摘要

采用水冷Cu坩埚真空感应悬浮熔炼技术制备了Ti－46Al－8Nb和Ti－46Al－8Nb－0.1Er合金.根据氧化动力学, 结合XRD, SEM和EDS分析氧化层的相结构、显微组织及与基体合金的界面特征,测试了合金在900℃的抗循环氧化性能. 结果表明, 2种合金循环氧化100 h, 100 cyc均未见氧化膜剥落,Ti－46Al－8Nb－0.1Er较Ti－46Al－8Nb表现出更优良的抗氧化性能,氧化后第二层混合氧化物主要由Al₂O₃组成,连续致密且与基体良好结合的氧化膜可明显降低合金的氧化速率、减小氧化增重及氧化膜厚度.Er净化了合金基体, 阻止O原子内向扩散,并促进TiAl氧化膜中的Al₂O₃形成, 从而提高TiAl基合金的抗循环氧化性能.

关键词： TiAl; 循环氧化; Er; 氧化层

本文引用格式

宫子琪 , 陈子勇 , 柴丽华 , 相志磊 , 聂祚仁 . 含Er高Nb TiAl基合金抗循环氧化性能研究[J]. 金属学报, 2013 , 49(11) : 1369 -1373 . DOI: 10.3724/SP.J.1037.2013.00394

Abstract

Ti－46Al－8Nb and Ti－46Al－8Nb－0.1Er alloys were prepared by the cold crucible induction levitation melting method. The oxidation behavior experiment was done in air at 900℃ up to one hundred times. Based on the oxidation kinetic analysis and the phase constitution, microstructure and the interface of the oxidation film and the matrix were investigated by means of XRD and SEM equipped with EDS, the cyclic oxidation resistance of TiAl based alloys was explored. The results showed that no spallation of layer occurs in both alloys, and Ti－46Al－8Nb－0.1Er comparing with Ti－46Al－8Nb exhibits more excellent oxidation resistance, oxides formed on the surface consist of mainly Al₂O₃, the continuous compact oxidation film with a good combination with the matrix significantly decreases the oxidation rate, the mass gain and the oxide film thickness. The addition Er purifies the alloy matrix and prevents the inward diffusion of oxygen atoms, thereby improves the cyclic oxidation resistance of TiAl based alloy.

Key words： TiAl; cyclic oxidation; Er; oxide layer

参考文献

[1] Djanarthany S, Viala J C, Bouix J. Mater Chem Phys, 2001; 72: 301

[2] Wu X H. Intermetallics, 2006; 14: 1114

[3] Kim Y W. JOM, 1994; 46(7): 30

[4] Dimiduk D M. Mater Sci Eng, 1999; A263: 281

[5] Yang M R, Wu S K. Acta Mater, 2002; 50: 691

[6] Xin L, Shao G, Wang F, Tsakiropoulos P, Li T. Intermetallics, 2003; 11: 651

[7] Nishimoto T, Izumi T, Hayashi S, Narita T. Intermetallics, 2003; 11: 225

[8] Sun J, Wu J S, Zhao B, Wang F. Mater Sci Eng, 2002; A329－331: 713

[9] Perez P, Jimenez J A, Frommeyer G, Adeva P. Mater Sci Eng, 2000; A284: 138

[10] Leyens C, Peters M, translated by Chen Z H. Titanium and Titanium Alloys.Beijing: Chemical Industry Press, 2005: 183

(Leyens C, Peters M著, 陈振华~译. 钛与钛合金. 北京: 化学工业出版社, 2005: 183)

[11] Zhao L L, Lin J P, Wang Y L, Ye F, Chen G L. Acta Metall Sin, 2008; 44: 557

(赵丽利, 林均品, 王艳丽, 叶丰, 陈国良. 金属学报, 2008; 44: 557)

[12] He S F, Lin J P, Xu X J, Gao J F, Wang Y L, Song X P, Chen G L. Rare Met Mater Eng,2006; 35: 257

(何素芳, 林均品, 徐向俊, 高建峰, 王艳丽, 宋西平, 陈国良. 稀有金属材料与工程, 2006; 35: 257)

[13] Lin J P, Zhao L L, Li G Y, Zhang L Q, Song X P, Ye F, Chen G L.Intermetallics, 2011; 19: 131

[14] Wu Y, Hagihara K, Umakoshi Y. Intermetallics, 2004; 12: 519

[15] Zhu Y M. Master Thesis, Harbin Institute of Technology, 2011

(朱燕敏. 哈尔滨工业大学硕士学位论文, 2011)

[16] Li B H. PhD Dissertation, Harbin Institute of Technology, 2007

(李宝辉. 哈尔滨工业大学博士学位论文, 2007)

[17] Lu X, He X B, Zhang B, Qu X H, Zhang L, Guo Z X, Tian J J. J Alloys Compd, 2009; 478: 220

[18] Zhao L L, Li G Y, Zhang L Q, Lin J P, Song X P, Ye F, Chen G L.Intermetallics, 2010; 18: 1586

[19] Zhao B, Wu J S, Sun J, Tu B J, Wang F. Mater Lett, 2002; 56: 533

[20] Zhang X Y. Practical Manual of Chemical. Beijing : National Defence Industry Press, 1986: 232

(张向宇. 实用化学手册. 北京: 国防工业出版社, 1986: 232)

[21] Perez P, Jimenez J A, Frommeyer G, Adeva P. Mater Sci Eng, 2000; A284: 138

[22] Yang R, Cui Y Y, Dong L M, Jia Q. J Mater Process Technol, 2003; 135: 179

[23] Yoshihara M, Miura K. Intermetallics, 1995; 3: 357

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract

参考文献