铜合金在中国南海深海环境下的腐蚀行为研究
收稿日期: 2013-03-28
修回日期: 2013-07-01
网络出版日期: 2013-10-11
基金资助
国家自然科学基金资助项目51171025
CORROSION BEHAVIOR OF COPPER ALLOYS IN DEEP OCEAN ENVIRONMENT OF SOUTH CHINA SEA
Received date: 2013-03-28
Revised date: 2013-07-01
Online published: 2013-10-11
通过实海暴露实验, 研究了H62黄铜,QAl9-2铝青铜和QSn6.5-0.1锡青铜在中国南海海域800和1200 m深海环境下浸泡3a的腐蚀行为. 结果表明: H62黄铜的腐蚀速率最高, 达到0.042 mm/a;QAl9-2铝青铜最低, 仅为0.003 mm/a; QSn6.5-0.1锡青铜居中, 约为0.004-0.007 mm/a.分析表明: 随着水深的增加, H62黄铜的腐蚀速率呈线性降低;QAl9-2铝青铜和QSn6.5-0.1锡青铜的腐蚀速率随水深的增加先降低后升高,腐蚀速率的最小值出现在水深800-1200 m之间. 采用SEM, EDS和XRD技术,进行了腐蚀形貌观察和腐蚀产物成分及相组成分析, 结果表明:H62黄铜发生了严重的脱锌腐蚀, 腐蚀产物由Cu, ZnO,Zn5(OH)8Cl2H2O和Cu(OH)2H2O组成,符合溶解-再沉积机制; QAl9-2铝青铜和QSn6.5-0.1锡青铜发生了脱成分(Al, Sn)腐蚀,QAl9-2铝青铜的腐蚀产物由Cu2O和CuCl2组成,QSn6.5-0.1锡青铜的腐蚀产物由Cu2O,CuCl2和Cu2Cl(OH)3组成.
孙飞龙 , 李晓刚 , 卢琳 , 万红霞 , 杜翠薇 , 刘智勇 . 铜合金在中国南海深海环境下的腐蚀行为研究[J]. 金属学报, 2013 , 49(10) : 1211 -1218 . DOI: 10.3724/SP.J.1037.2013.00142
The corrosion in deep ocean environment has been paied more and more attentions to the exploitation of marine resources. Different from shallow marine environments, deep ocean environments are specially characterized by high hydrostatic pressure, low temperature, variable dissolved oxygen content and pH value in deep ocean, etc.. So the corrosion behaviour of materials, such as ferrous and nonferrous metal and coatings, in deep ocean environments is different from that in shallow marine environments. A number of researches have been carried out to investigate the corrosion behaviour of metals in natural deep ocean in a few developed countries. Such researches, however, began until 2008 in South China Sea. In this work, the corrosion behavior of H62 brass, QAl9-2 and QSn6.5-0.1 bronze in 800 and 1200 m deep ocean environments of South China Sea was studied using field tests. The results indicated that the corrosion rates of copper alloys decreased in the following order: H62 (0.042 mm/a) > QSn6.5-0.1 (0.004-0.007 mm/a) > QAl9-2 (0.003 mm/a). The corrosion rate of H62 brass decreased linearly with the increase in depth. While the corrosion rates of QAl9-2 and QSn6.5-0.1 bronze decreased first and then increased with the increase in depth. The minimum value of corrosion rate occurred between 800-1200 m. The morphology and composition of corrosion products were investigated using SEM, EDS and XRD. The results demonstrated that the dezincification corrosion obeying solution-redeposition mechanism in H62 brass occurred. The corrosion products were composed of Cu, ZnO, Zn5(OH)8Cl2H2O and Cu(OH)2H2O. And the dealloying corrosion in QAl9-2 and QSn6.5-0.1 bronze occurred. The corrosion products of QAl9-2 bronze consist of Cu2O and CuCl2, and those of QSn6.5-0.1 bronze Cu2O, CuCl2 and Cu2Cl(OH)3.
Key words： copper alloy; corrosion; deep ocean; field test
[1] David A, Shi X. Corros Sci, 2005; 47: 2335
[2] Zhou J L, Li X G, Cheng X Q, Dong C F, Du C W, Lu L. Corros Sci Prot Technol, 2010; 22: 47
(周建龙, 李晓刚, 程学群, 董超芳, 杜翠薇, 卢琳. 材料腐蚀与防护技术, 2010; 22: 47)
[3] Schumacher M. Sea Water Corrosion Handbook. New Jersey: Park Ridge, 1979: 150
[4] Dexter S C. Handbook of Oceanographic Engineering Materials. New York: Whiley-Interscience, 1979: 23
[5] Dexter S C. Corrosion, 1980; 36: 423
[6] Sparks C P, Cabillic J P, Schawann J C. J Energy Resour-Trans ASME, 1983; 105: 282
[7] Laque F L. Marine Corrosion. London: John Wiley and Sons Inc., 1975: 40
[8] Chandler K A. Marine and Offshore Corrosion (Marine Engineering Series). London: Butter worth, 1985: 72
[9] Warren A B. J Mar Res, 1982; 40: 823
[10] Sawant S S, Venkat K, Wagh A B. Indian J Technol, 1993; 31: 862
[11] Venkatesan R, Venkataswamy M A, Bhaskaran T A, Dwarakadasa E S, Ravindran M.Br Corros J, 2002; 37: 257
[12] Venkatesan R, Dwarakadasa E S, Ravindran M. Corros Prev Control, 2004; 51: 98
[13] Heiser J, Soo P. Corrosion of Barrier Materials in Seawater Environments.New York: Long Island, 1995: 23
[14] Fischer K P, Espelid B, Schei B. Corrosion 2001. Houston: NACE, 2001: Paper No.01013
[15] Fischer K P. Corrosion 99. Houston: NACE, 1999: Paper No.361
[16] Chen S, Hatt W, Wolfson S. Corrosion, 2003; 59: 721
[17] Akio K. Corros Sci, 2005; 47: 2361
[18] Mohammed R, Timothy J D. Int J Fatigue, 2008; 30: 2220
[19] Blundy R F, Shreir L L. Corros Sci, 1977; 17: 509
[20] Venkatesan R. PhD Dissertation, Indian Institute of Science, Bangalore, 2000
[21] Beccaria A M, Fiordiponti P, Mattogno G. Corros Sci, 1989; 29: 403
[22] Beccaria A M, Poggi G, Arfelli M, Mattogno G. Corros Sci, 1993; 34: 989
[23] Beccaria A M, Poggi G, Gingaud D, Castello P. Br Corros J, 1994; 29: 65
[24] Beccaria A M, Poggi G. Br Corros J, 1985; 20: 183
[25] Zhu X L, Li L Y, Xu J. Chin J Nonferrous Met, 1998; 8 (suppl 1): 210
(朱小龙, 林乐耘, 徐杰. 中国有色金属学报, 1998; 8(增刊1): 210)
[26] Langenegger E E, Robinson F P A. Corrosion, 1969; 25: 137
[27] Namboodhirl T K G, Chaudhary R S, Prakash B, Agrawal M K. Corros Sci, 1982; 22: 1037
[28] Li Y, Zhu Y L. Corros Prot, 2006; 27: 222
(李勇, 朱应禄. 腐蚀与防护, 2006; 27: 222)
[29] Kear G, Barker B D, Stokes K R, Walsh F C. Electrochim Acta, 2007; 52: 2343
[30] Strandberg H, Johansson L G. J Electrochem Soc, 1998; 145: 1093
[31] Nunea L, Reguera E, Corvo F, Gonzalez E, Vazquez C. Corros Sci, 2005; 47: 461
/
| 〈 |
|
〉 |
