Please wait a minute...
金属学报  2006, Vol. 42 Issue (2): 134-138     
  论文 本期目录 | 过刊浏览 |
氧对Zr-Cu-Ni-Al-Ti块体非晶合金热稳定性的影响
贺林;孙军
西安交通大学材料科学与工程学院
Effect of Oxygen on the Thermal Stability of Zr-Cu-Ni-Al-Ti Bulk Amorphous Alloy
HE Lin
西安交通大学材料科学与工程学院
引用本文:

贺林; 孙军 . 氧对Zr-Cu-Ni-Al-Ti块体非晶合金热稳定性的影响[J]. 金属学报, 2006, 42(2): 134-138 .
, . Effect of Oxygen on the Thermal Stability of Zr-Cu-Ni-Al-Ti Bulk Amorphous Alloy[J]. Acta Metall Sin, 2006, 42(2): 134-138 .

全文: PDF(505 KB)  
摘要: 以结晶Zr棒及海绵Zr为原材料、利用浇包型坩埚电弧炉倾斜铸造法制备了不同氧杂质含量的Zr52.5Cu17.9Ni14.6Al10Ti5块体非晶合金楔形试样, 研究了氧对合金玻璃形成能力及热稳定性的影响.结果表明: 氧杂质虽然降低合金以最大非晶形成厚度tmax为表征的玻璃形成能力, 却提高合金以过冷液相区温度范围Tx1为表征的热稳定性. 氧杂质具有提高合金开始晶化表观激活能E ax1的趋势.
关键词 锆基块体非晶合金氧杂质玻璃形成能力    
Abstract:Crystal zirconium bar and sponge zirconium were employed as raw materials to prepare wedge-like specimens of Zr52.5Cu17.9Ni14.6Al10Ti5 bulk amorphous alloy with different oxygen impurity contents by a tilt casting method using ladle hearth type arc furnace. Oxygen impurity effect on the alloy’s glass forming ability and thermal stability was investigated. It is shown that the glass forming ability of the quinary alloy characterized by maximum amorphous sample forming thickness tmax decreased as oxygen impurity content increased, on the contrary, its thermal stability characterized by supercooled liquid region ΔTX enhanced. The reason that oxygen impurity made Zr52.5Cu17.9Ni14.6Al10Ti5 alloy’s thermal stability increased related to its higher reduced glass transition temperature Trg.
Key wordsZr-base bulk amorphous alloy    glass forming ability    thermal stability    crystallization kinetics
收稿日期: 2005-05-26     
ZTFLH:  TG139.8  
[1] Liu C T, Chisholm M F, Miller M K. Intermetallics, 2002; 10: 1105
[2] Lin X H, Johnson W L, Rhim W K. Mater Trans JIM, 1997; 38: 473
[3] Yokoyama Y, Fkaura K, Inoue A. Intermetallics, 2002; 10: 1113
[4] Gebert A, Eckert J, Schultz L. Acta Mater, 1998; 46: 5475
[5] Chen M W, Inoue A, Sakurai T. Appl Phys Lett, 1999; 74: 812
[6] Eckert J, Mattern N, Zinkevitch M, Seidel M. Mater Trans JIM, 1998; 39: 623
[7] Inoue A, Shibata T, Zhang T. Mater Trans JIM, 1995; 36: 1420
[8] Yokoyama Y, Inoue K, Fukaura K. Mater Trans, 2002; 43: 2316
[9] Andreas A K, Jorg F L, William L J, Peter J U. Scr Mater, 2001; 44: 1269
[10] Liu L, Chan K C. Intermetallics, 2004; 12: 1143
[11] Chen H S. J Non-Cryst Solids, 1978; 27: 257
[12] Murty B S, Ping D H, Hono K, Inoue A. Acta Mater, 2000; 48: 3985
[13] Louzguine D V, Inoue A. Scr Mater, 2002; 47: 887
[14] Kubler A, Eckert J, Gebert A, Schultz L. J Appl Phys, 1998; 83: 3438
[15] Hng H H, Li Y, Ng S C, Ong C K. J Non-Cryst Solids, 1996; 208: 127
[16] Lu Z P, Li Y, Ng S C. J Non-Cryst Solids, 2000; 270: 103
[17] Inoue A, Takeuchi A. Mater Sci Eng, 2004; A375-377: 16
[1] 杨群, 彭思旭, 卜庆周, 于海滨. 非晶态Ni80P20合金的玻璃转变和过冷液体性质[J]. 金属学报, 2021, 57(4): 553-558.
[2] 吕宝臣 刘海涛 任鑫 王晓亮 李刚 孙跃军. 高溶质浓度(伪)三元系金属玻璃原子密堆垛模型[J]. 金属学报, 2012, 48(2): 240-244.
[3] 胡强 曾燮榕 钱海霞 谢胜辉 盛洪超. 铁基块体非晶合金玻璃形成能力与特征自由体积的关系[J]. 金属学报, 2012, 48(11): 1329-1334.
[4] 黄彩云 谌祺 柳林. 无Ni型锆基块体非晶合金在生物模拟体液中的摩擦磨损性能[J]. 金属学报, 2010, 46(6): 681-686.
[5] 吴泽宇 郭胜锋 李宁 柳林. Co对Fe--B--Y--Nb块体非晶合金玻璃形成能力及软磁性能的影响[J]. 金属学报, 2009, 45(2): 249-252.
[6] 孙亚娟 魏先顺 黄永江 沈 军. 稀土Gd掺杂对锆基块体非晶合金玻璃形成能力及力学性能的影响[J]. 金属学报, 2009, 45(2): 243-248.
[7] 董盼; 张甲; 常新春; 侯万良; 全明秀; 王建强 . Al--Co--Y体系中富 Al区非晶相的形成与结构演化[J]. 金属学报, 2008, 44(2): 227-232 .
[8] 徐民; 孙羽; 全明秀; 王沿东; 左良 . Fe--Co--Nd--Nb--B非晶合金的形成和软磁性能[J]. 金属学报, 2007, 43(7): 699-704 .
[9] 陈德民; 王刚; 孙剑飞; 沈军 . 高应变速率下钨丝增强锆基块体非晶合金复合材料的变形行为[J]. 金属学报, 2006, 42(9): 1003-1008 .
[10] 李宏祥; Seonghoon.Yi; 张新房; 王晓东 . Fe--C--Si--B--P--Cr--Mo--Al块体非晶合金的制备与压缩性能[J]. 金属学报, 2006, 42(7): 777-780 .
[11] 王刚; 沈军; 孙剑飞; Z.H.Stachurski; 周彼德 . Zr41.25Ti13.75Ni10Cu12.5Be22.5块体非晶合金的拉伸断裂行为[J]. 金属学报, 2005, 41(3): 291-296 .
[12] 刘冬艳; 王成; 张海峰; 胡壮麒 . 铁基块状非晶合金的制备及性能[J]. 金属学报, 2005, 41(2): 209-213 .
[13] 沈军; 王刚; 孙剑飞; 陈德民; 邢大伟; 周彼德 . Zr基块体非晶合金在过冷液相区的超塑性流变行为[J]. 金属学报, 2004, 40(5): 518-522 .
[14] 邢大伟; 孙剑飞; 沈军; 王刚; 严明; 柳宇 . Ti含量对(Zr0.59Cu0.18Ni0.13Al0.10)100-xTix合金非晶形成能力的影响[J]. 金属学报, 2004, 40(4): 416-420 .
[15] 邢大伟; 沈军; 孙剑飞; 王刚 . 高过冷度Zr-Cu-Ni-Al-Hf-Ti块体非晶合金[J]. 金属学报, 2003, 39(4): 355-358 .