[1] Nguyen T C, Weckman D C, Johnson D A, Kerr H W. Sci Technol Weld Join, 2006; 11: 618
[2] Hu Z K, Wu C S. Acta Metall Sin, 2008; 44: 1445
(胡志坤, 武传松. 金属学报, 2008; 44: 1445)
[3] Albright C E, Chiang S. J Laser Appl, 1988; 1: 18
[4] Fabbro R. J Phys, 2010; 43D: 445501
[5] Wei P S. J Heat Transf, 2011; 133: 031005-1
[6] Nguyen T C, Weckman D C, Johmson D A. Weld J, 2007; 86: 360
[7] Pei Y L, Shan J G, Ren J L. Acta Metall Sin, 2012; 48: 1431
(裴莹蕾, 单际国, 任家烈. 金属学报, 2012; 48: 1431)
[8] Bradstreet B J. Weld J, 1968; 47: 314
[9] Gratzke U, Kapadia P D, Dowden J, Kroos J, Simon G. J Phys, 1992; 25D: 1640
[10] Tsukamoto S, Irie H, Inagaki M, Hashimoto T. Trans Natl Res Inst Met, 1983; 25: 8
[11] Mill K C, Keene B J. Int Mater Rev, 1990; 35: 185
[12] Nguyen T C, Weckman D C. Sci Technol Weld Join, 2005; 10: 447
[13] Chen J, Wu C S. Acta Metall Sin, 2009; 45: 1070
(陈姬, 武传松. 金属学报, 2009; 45: 1070)
[14] Wu C S, Hu Z K, Zhang Y M. Proc Inst Mech Eng, 2009; 233B: 751
[15] Chen J. PhD Dissertation, Shandong University, Jinan, 2009
(陈姬. 山东大学博士学位论文, 济南, 2009)
[16] Mendez P F, Eagar T W. Weld J, 2003; 82: 296
[17] Paton E O, Mandel S L, Sidorenko B G. Autom Weld, 1971; 24: 1
[18] Shimada W, Hoshinouchi S. J Jpn Weld Soc, 1982; 51: 280
[19] Kumar A, Debroy T. Weld J, 2006; 85: 292
[20] Hess A, Dausinger F. In: Laser Institute of America ed., Proc 3rd Pacific Int Conf on Applications of Lasers and Optics 2008, Orlando: Laser Institute of America, 2008: 140
[21] Thomy C, Seefeld T, Wagner F, Vollertsen F. In: Laser Institute of America ed., Proc 25th Int Congress on Applications of Laser and Electro-Optics ICALEO 2006, Orlando: Laser Institute of America, 2006: 543
[22] Neumann S, Seefeld T, Schilf M. In: Laser Institute of America ed.,Proc 27th Int Congress on Applications of Laser and Electro-Optics ICALEO 2008, Orlando: Laser Institute of America, 2008: 345
[23] Ream S. In: Laser Institute of America ed., Proc 26th Int Congress on Applications of Laser and Electro-Optics ICALEO 2007, Orlando: Laser Institute of America, 2007: 149
[24] Kawahito Y, Mizutani M, Katayama S. Sci Technol Weld Join, 2009; 14: 588
[25] Kawahito Y, Mizutani M, Katayama S. J Phys, 2007; 40D: 5854
[26] Fabbro R, Slimani S, Doudet I, Coste F, Briand F. J Phys, 206; 39D: 394
[27] Amara E H, Fabbro R. Appl Phys, 2008; 41D: 1
[28] katayama S J, Yohei A, Mizutani M, Kawahito Y. In: Elsevier P O ed.,Lasers in Manufacturing 2011-Proc 6th Int WLT Conference on Lasers in Manufacturing, Netherlands: Physics Procedia, 2011: 75 |