金属学报  2011, Vol. 47 Issue (6): 649-654    DOI: 10.3724/SP.J.1037.2011.00030

论文 本期目录 | 过刊浏览 |

Al-12.7Si合金表面强烈塑性变形诱发的纳米化

刘刚1,严文聪1,于福晓2,赵刚3,赵骧2,左良1

1. 东北大学研究院, 沈阳 110004 2. 东北大学材料电磁过程研究教育部重点实验室, 沈阳 110819 3. 东北大学材料各向异性与织构教育部重点实验室, 沈阳 110819

NANOCRYSTALLIZATION OF Al–12.7Si ALLOY INDUCED BY SURFACE INTENSE PLASTIC DEFORMATION

LIU Gang 1, YAN Wencong 1, YU Fuxiao 2, ZHAO Gang 3, ZHAO Xiang 2, ZUO Liang 1

1. Research Academy, Northeastern University, Shenyang 110004 2. Key Laboratory of Electromagnetic Processing of Materials (Ministry of Education), Northeastern University, Shenyang 110819 3. Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Shenyang 110819

刘刚 严文聪 于福晓 赵刚 赵骧 左良. Al-12.7Si合金表面强烈塑性变形诱发的纳米化[J]. 金属学报, 2011, 47(6): 649-654.
, , , , , . NANOCRYSTALLIZATION OF Al–12.7Si ALLOY INDUCED BY SURFACE INTENSE PLASTIC DEFORMATION[J]. Acta Metall Sin, 2011, 47(6): 649-654.

摘要 参考文献 相关文章 Metrics 全文: PDF(1779 KB)   摘要: 对Al-12.7Si合金进行表面机械研磨处理, 在表层制备纳米-微米梯度结构,利用XRD和TEM研究结构演变过程. Al-12.7Si合金形变诱发的纳米化机理归纳如下:在外加载荷的反复作用下, Al基体高密度位错通过滑移、湮灭和重组形成位错胞/亚微晶;通过不断吸收位错, 位错胞/亚微晶之间的取向差逐渐增大; 亚微晶内高密度位错重复上述过程, 使晶粒尺寸减小、取向差增大, 最终形成等轴状、取向呈随机分布的纳米晶.Si颗粒通过内部位错单滑移或多滑移所产生的切割及部分溶解而细化, 并随着Al基体的塑性流动而呈弥散分布. 关键词 ： 表面机械研磨处理,  Al-12.7Si合金,  纳米化机理     Abstract：Gradient nano–micro–structured surface layer was synthesized on Al–12.7Si alloy by means of surface mechanical attrition treatment. The microstructural evolution was examined by XRD and TEM. The surface intense deformation induced nanocrystallization mechanism was summarized as follows: upon the application of repeated loads, dislocation cells/sub–micro–grains form through slips, annihilations and recombinations of high density of dislocations in Al coarse grains. The misorientations between the dislocation cells/sub–micro–grains increased by cotinuously absorbing more dislocatons. High density of dislocations in sub–micro–grains developing in above route led to the redction of grain size and the increment of misorientatins between the refined grains, and finally equiaxed nc grains with random orientations formed. The refinement of Si particles was found to be carried out through single–or multi–slips of internal dislocations and partial dissolution, then the refined Si particles distributed niformly due to the plastic flows in Al matrix. Key words： surface mechanical attrition treatment    Al–12.7Si alloy    grain refinement mechanism 收稿日期: 2011-01-13      ZTFLH:  TG142.71   基金资助: 国家高技术研究发展计划;国家科技支撑计划项目国家高技术研究发展计划项目 2008AA030701和国家科技支撑计划项目2009BAE80B01资助 作者简介: 刘刚, 男, 1963年生, 教授, 博士 服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 刘刚 严文聪 于福晓 赵刚 赵骧 左良 44.8K 链接本文: https://www.ams.org.cn/CN/10.3724/SP.J.1037.2011.00030      或      https://www.ams.org.cn/CN/Y2011/V47/I6/649 [1] Lu K, Lu J. Mater Sci Eng, 2004; A375–377: 38 [2] Wu X, Tao N, Hong Y, Xu B, Lu J, Lu K. Acta Mater, 2002; 50: 2075 [3] Wang K, Tao N R, Liu G, Lu J, Lu K. Acta Mater, 2006; 54: 5281 [4] Zhu K Y, Vassel A, Brisset F, Lu K, Lu J. Acta Mater, 2004; 52: 4101 [5] Sun Q, Shi Y N, Zhng X, Lu K. Acta Mater, 2007; 55: 975 [6] Wu X, Tao N, Hong Y, Liu G, Xu B, Lu J, Lu K. Acta Mater, 2005; 53: 681 [7] Tao N R, Wang Z B, Tong W P, Sui M L, Lu J, Lu K. Acta Mater, 2002; 50: 4603 [8] Zhang H W, Hei Z K, Liu G, Lu J, Lu K. Acta Mater, 2003; 51: 1871 [9] L¨u A Q, Liu G, Liu C M. Acta Metall Sin, 2004; 40: 943 (吕爱强, 刘 刚, 刘春明. 金属学报, 2004; 40: 943) [10] Wang Z B, Tao N R, Li S, Wang W, Liu G, Lu J, Lu K. Mater Sci Eng, 2003; A352: 144 [11] Ba D M, Ma S N, Meng F J, Li C Q. Surf Coat Technol, 2007; 202: 254 [12] Zhang Y S, Wang K, Han Z, Liu G. Wear, 2007; 262: 1463 [13] Wang T, Wang D P, Liu G, Gong B M, Song N S. Appl Surf Sci, 2008; 255: 1824 [14] Wei Y H, Liu B S, Hou L F, Xu B S, Liu G. J Alloy Compd, 2008; 452: 336 [15] Zhou L, Liu G, Ma X L, Lu K. Acta Mater, 2008; 56: 78 [1] 吕爱强; 刘刚; 刘春明 . 机械研磨诱导316L不锈钢表层组织的演变[J]. 金属学报, 2004, 40(9): 943-947 . Viewed Full text Abstract Cited   Shared      Discussed