金属学报  1959, Vol. 4 Issue (2): 131-134

论文 本期目录 | 过刊浏览 |

THE PROBLEM OF THE ANISOTROPY OF METALS AFTER PLASTIC DEFORMATION The Method of Determination of the Degree Of Anisotropy in Polycrystalline Metals

W.TRUSZKOWSKI

InstituteofMetals;PolishAcademyofSciences

THE PROBLEM OF THE ANISOTROPY OF METALS AFTER PLASTIC DEFORMATION The Method of Determination of the Degree Of Anisotropy in Polycrystalline Metals

W; TRUSZKOWSKI Institute of Metals; Polish Academy of Sciences

W.TRUSZKOWSKI. THE PROBLEM OF THE ANISOTROPY OF METALS AFTER PLASTIC DEFORMATION The Method of Determination of the Degree Of Anisotropy in Polycrystalline Metals[J]. 金属学报, 1959, 4(2): 131-134.
. THE PROBLEM OF THE ANISOTROPY OF METALS AFTER PLASTIC DEFORMATION The Method of Determination of the Degree Of Anisotropy in Polycrystalline Metals[J]. Acta Metall Sin, 1959, 4(2): 131-134.

摘要 参考文献 相关文章 Metrics 全文: PDF(342 KB)   摘要: <正> The problem of the anisotropy of polycrystallin metals is the subject of an ever in-creasing interest in later years. Many investigations led to the conclusion that the majorityof metals used in industry is anisotropic. The practical importance of this problem consistsin the change of properties in regard to the direction in metal products and especially inrolled bands and sheets. The directionality of properties is generally an undesirable pheno- 收稿日期: 1959-02-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 W.TRUSZKOWSKI 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1959/V4/I2/131 No related articles found! Viewed Full text Abstract Cited   Shared      Discussed