金属学报  1959, Vol. 4 Issue (2): 139-142

论文 本期目录 | 过刊浏览 |

THE WORK HARDENING OF METALS IN INDUSTRIAL PROCESSES OF PLASTIC DEFORMATION

W.TRUSZKOWSKI

InstituteofMetals;PolishAcademyofSciences

THE WORK HARDENING OF METALS IN INDUSTRIAL PROCESSES OF PLASTIC DEFORMATION

W. TRUSZKOWSKI Institute of Metals; Polish Academy of Sciences

W.TRUSZKOWSKI. THE WORK HARDENING OF METALS IN INDUSTRIAL PROCESSES OF PLASTIC DEFORMATION[J]. 金属学报, 1959, 4(2): 139-142.
. THE WORK HARDENING OF METALS IN INDUSTRIAL PROCESSES OF PLASTIC DEFORMATION[J]. Acta Metall Sin, 1959, 4(2): 139-142.

摘要 参考文献 相关文章 Metrics 全文: PDF(349 KB)   摘要: <正> If a plastic metal is subjected to permanent deformation, then due to the changesoccurring in crystallographic lattice the metal alters its properties. Experiments carried outby many investigators prove that the ultimate strength, the yield strength and hardness in-crease with the deformation, on the other hand, the elongation decreases, the impact valueand reduction of area also change. Fig. 1 illustrates the effect of cold work by drawingon the mechanical properties of an armco iron according to W. Broniewski and J. Krol. 收稿日期: 1959-02-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 W.TRUSZKOWSKI 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1959/V4/I2/139 No related articles found! Viewed Full text Abstract Cited   Shared      Discussed