金属学报  1979, Vol. 15 Issue (3): 400-461

论文 本期目录 | 过刊浏览 |

钛钢热轧板卷同卷机性差异的原因

叶恒强;邹本三;张立新

中国科学院金属研究所;中国科学院金属研究所;中国科学院金属研究所

AN INVESTIGATION OF THE INHOMOGENEITY OF MECHANICAL PROPERTIES OF A HOT ROLLED 10Ti STEEL ROLL

Ye Hengqiang;Zou Bensen;Zhang Lixin Institute of Metal Research; Academia Sinica

叶恒强;邹本三;张立新. 钛钢热轧板卷同卷机性差异的原因[J]. 金属学报, 1979, 15(3): 400-461.
, , . AN INVESTIGATION OF THE INHOMOGENEITY OF MECHANICAL PROPERTIES OF A HOT ROLLED 10Ti STEEL ROLL[J]. Acta Metall Sin, 1979, 15(3): 400-461.

摘要 参考文献 相关文章 Metrics 全文: PDF(1592 KB)   摘要: 10Ti钢热轧板卷头尾部的屈服强度比中部高出约10kg/mm~2。从晶粒细化、固溶强化、亚晶块强化以及TiC的弥散强化等各方面讨论了钛钢同卷机性差异的原因。指出TiC的分布状态差异是主要因素。 Abstract：The yield strength of both ends of a hot-rolled 10Ti steel roll was found tobe about 10kg/mm~2 higher than its middle. Various factors possibly contributableto such an inhomogeneity in mechanical properties have been considered andsupported by experimental investigation. It is concluded that size and distributionof TiC particles are the main cause of the difference in yield strength betweenthe ends and the middle of the roll. 收稿日期: 1979-03-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 叶恒强 邹本三 张立新 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1979/V15/I3/400 [1] Irvine, K. J., Iron Steel (London), 44 (1971) , 31． [2] Beker, T. N., J. Iron Steel Inst. (London), 211 (1973) , 503． [3] Lacy, C. E. and Gensamer, M., Trans. ASM, 32 (1944) , 88． [4] Bon, A. le, Rofes-Vernis, J. and Rossard, C., Metal Sci. J., 9 (1975) , 36． [5] Orawan, E., Symposium on Internal Stresses in Metals and Alloys, Institute of Metals, 1948, p, 451． [6] 林栋梁,金属学报,14 (1978) ,323． [7] Davenport, A. T. and Honeycombe, R. W. K., Proc. Roy. Soc., Ser. A, 322 (1971) , 191． [8] Freeman, S., Effect of Second-Phase Particles on the Mechanical Properties of Steel, The Iron and Steel Institute, London, 1971, p. 152 No related articles found! Viewed Full text Abstract Cited   Shared      Discussed