金属学报  1980, Vol. 16 Issue (4): 454-500

论文 本期目录 | 过刊浏览 |

钢在腐蚀疲劳条件下裂纹扩展形态的转变

郑文龙

上海材料研究所

CHANGES OF CRACK GROWTH MORPHOLOGY IN STEEL UNDER CORROSION FATIGUE CONDITION

Zheng Wenlong Shanghai Institute of Material Research

郑文龙. 钢在腐蚀疲劳条件下裂纹扩展形态的转变[J]. 金属学报, 1980, 16(4): 454-500.
. CHANGES OF CRACK GROWTH MORPHOLOGY IN STEEL UNDER CORROSION FATIGUE CONDITION[J]. Acta Metall Sin, 1980, 16(4): 454-500.

摘要 参考文献 相关文章 Metrics 全文: PDF(3630 KB)   摘要: 本文应用电子断口学、断裂力学的方法,通过实际断裂构件的分析和腐蚀疲劳(CF)、应力腐蚀开裂(SCC)实验,观察到钢在CF条件下裂纹扩展形态不是单一的.它与钢的临界应力强度因子K_(IC),临界SCC强度因子K_(ISCC),CF最大应力强度因子K_(Imax),应力强度因子范围△K,应力比R及频率f等有关.当dK/da>0时,基本的断裂形态有三种:(1)当K_(Imax) Abstract：Through the analysis of parts failed in service by electronfractography andfracture mechanics, and by corrosion fatigue (CF) and stress corrosion cracking(SCC) experiments, it was shown that under the condition of CF,the crackingmorphology of steel is not merely governed by a single mechanism. It dependsupon the critical stress intensity factor of the steel K_(IC), CF maximum stress in-tensity factor K_(Imax), threshold SCC intensity factor range △K, frequency f, stressratio R, etc. In case of (dK/da)>0, three basic fracture morphologies wereobserved: (a) when K_(Imax) 收稿日期: 1980-04-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 郑文龙 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1980/V16/I4/454 [1] Metals Handbook, ASM, 8th Ed., Vol. 10, 1975, p. 240． [2] Laird, C., Amer. Soc. Test. Mater., Spec. Tech. Publ. № 415, 1967, p. 131． [3] 小寺沢良一,材料,23 (1974) , 666． [4] Metals Handbook, ASM 8th Ed., Vol. 10, 1975, p. 97． [5] 近滕达男,防食技术,26 (1977) , 31． [6] Harston, J. D. and Scully, J. C., Corrosion, 25 (1969) , 493． [7] Dean. S. W., Amer. Soc. Test. Mater., Spec. Tech. Publ., № 610, 1975, p. 308． [8] 渡辺正纪,向井喜彦,钢溶接,日刊工业,1971,p.49． [9] Parkins, R. N., in Corrosion, Ed. L. L. Shrier, 2nd Ed., George Newncs Lfd, 1976, p. 8: 3． [10] Tyzack, C., Brit. Corros. J., 6 (1971) , 219． [11] Logan, H. L., The Stress Corrosion of Metals, John Wiley & Sons, New York, 1966, p. 5． [12] 肖纪美,金属材料的腐蚀问题,中国工业出版社,1962,p.4． [13] Spahn, H., Fundamental Aspects of Stress Corrosion Cracking, NACE, 1967, p. 94． [14] 江原隆一郎,纪博德,高野勇作,中岛庆一,(火田)野和雄,三菱重工技报,16(1979) ,№ 2,162． [15] Gallagher, J. P., J. Mater., 6 (1971) , 941． [16] Wei, R. P., Amer. Soc. Test. Mater., Spec. Tech. Publ., № 415, 1967, p. 460． [17] Crooker, T. W. and Lange, E. A., Amer. Soc. Test. Mater., Spec. Tech. Publ., № 462, 1970, p. 258． No related articles found! Viewed Full text Abstract Cited   Shared      Discussed