金属学报  1985, Vol. 21 Issue (4): 1-7

论文 本期目录 | 过刊浏览 |

工业Al-Cu-Mg合金中的Portevin-Le Chatelier效应

张彩碚;王洪祥;王继尧;赖祖涵

东北工学院;东北工学院;东北工学院;东北工学院

PORTEVIN-LE CHATELIER EFFECT IN COMMERCIAL AI-Cu-Mg ALLOY

ZHANG Caipei;WANG Hongxiang;WANG Jiyao;LAI Zuhan Northeast Institute of Technology;Shenyang

张彩碚;王洪祥;王继尧;赖祖涵. 工业Al-Cu-Mg合金中的Portevin-Le Chatelier效应[J]. 金属学报, 1985, 21(4): 1-7.
, , , . PORTEVIN-LE CHATELIER EFFECT IN COMMERCIAL AI-Cu-Mg ALLOY[J]. Acta Metall Sin, 1985, 21(4): 1-7.

摘要 参考文献 相关文章 Metrics 全文: PDF(683 KB)   摘要: 在一定的温度和应变速率范围内研究了淬火和淬火后经短期人工时效处理的Al-Cu-Mg合金薄板的Portevin-Le Chatelier效应.结果表明,淬火后短期人工时效处理可以推迟产生波纹痕迹.据此,提出了推迟板材产生不均匀变形带的措施. Abstract：A study in a certain range of temperature and strain rate was made of thePortevin-Le Chatelier effect in the sheet specimens as-quenched or further pur-posely aged for a short-term of a commercial Al alloyc ontaining 4.19% Cu and1.25% Mg.It resulted that the ripple marking formation on the surface of thesheet may be delayed by the further short-term aging after quenching.Thus,thedynamic strain aging process is likely to delay the happening of inhomogeneousdeformation band on the alloy sheet. 收稿日期: 1985-04-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 张彩碚 王洪祥 王继尧 赖祖涵 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1985/V21/I4/1 1 Van Den Beukel,A.,Phys.Status Solidi,(a)30(1975) ,197． 2 塚田晴一;井上稔;高桥明男,塑性加工,15(1974) ,526． 3 Couchman,P.R.;Reynolds,C.L.,Jr.,Philos.Mag.,34(1976) ,327． 4 Miura B,Mechanical Behavior of Materials,Proc.of the Int.Conf.on Mechanical Behavior of Materials,Vol.1,JSMS,1972,p.128． 5 Mukherjee,K.;May,T.;D' Antonic,C.;Maciag,R.J.,Metall.Trans.1(1970) ,3233． 6 Kimura,H.;Kimura,A.;Hasiguti,R.R.,Acta Metall.,10(1962) 607． 7 King,J.E.;You,C.P.;Knott,J.F.,Acta Metall.,29(1981) ,1553． No related articles found! Viewed Full text Abstract Cited   Shared      Discussed