金属学报  1985, Vol. 21 Issue (4): 57-62

论文 本期目录 | 过刊浏览 |

球化碳钢中的碳化物开裂

张以增;刘湘杰

华中工学院;华中工学院;长沙矿冶研究院

CARBIDE PARTICLE CRACKING IN SPHEROIDIZED CARBON STEELS

ZHANG Yizeng;LIU Xiangjie Huazhong University of Science and Technology;Wuhan

张以增;刘湘杰. 球化碳钢中的碳化物开裂[J]. 金属学报, 1985, 21(4): 57-62.
, . CARBIDE PARTICLE CRACKING IN SPHEROIDIZED CARBON STEELS[J]. Acta Metall Sin, 1985, 21(4): 57-62.

摘要 参考文献 相关文章 Metrics 全文: PDF(488 KB)   摘要: 对四种不同含碳量的球化碳钢中碳化物质点在拉伸缩颈过程中的开裂进行了定量观测.估算了碳化物质点开裂的局部临界应力值,讨论了微观组织结构对质点开裂的影响. Abstract：A quantitative study of the carbide particle cracking was performed on fourdifferent spheroidized carbon steels deformed uniaxially in tension.The local crit-ical stresses for the carbon particle cracking were estimated.Based on these obser-vations and computations,the effect of microstructure on the carbide particlecracking was also discussed. 收稿日期: 1985-04-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 张以增 刘湘杰 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1985/V21/I4/57 1 Argon,A.S.;Im,J.;Safoglu,R.,Metall.Trans.,6A(1975) ,839． 2 Fisher,J.R.;Guriland,J.,Met.Sci.,15(1981) ,193． 3 Lc Roy,G.;Embury,J.D.;Edward,G.;Ashby,M.F.,Acta Metall.,29(1981) ,1509． 4 张以增,金属学报,19(1983) ,A70． 5 Zou,H.-C.;Lou,Y.-L.;Zhang,Y.-Z.,Met.Sci Eng.,62(1984) ,163． 6 Gurland,J.,Acta Metall.,20(1972) ,735． 7 Inoue,T.;Kinoshita,S.,The Microstructure and Design of Alloys,Proc.of the 3rd Int.Conf.on the Strength of Metals and Alloys,Cambridge,England,Aug.20,1973,Sponsored by The Inst.of Metals and The Iron and Steel Inst.,Vol.1,paper 32,1973,p.159． 8 Needleman,A.,J.Mech.Phys.Solids,20(1970) ,111． 9 McCormick,C.W.,NASTRAN Users Manual,Level 15． 5,Document NASA ST[(222) 01] ,NASA,Washington,DC.,1973． 10 Kelly,A.,Strong Solids,Oxford Univ.Press,1966,p.9 No related articles found! Viewed Full text Abstract Cited   Shared      Discussed