Please wait a minute...
金属学报  1993, Vol. 29 Issue (4): 73-76    
  论文 本期目录 | 过刊浏览 |
304奥氏体钢的高温高压氢腐蚀
李晓刚;陈华;姚治铭;李劲;柯伟
中国科学院金属腐蚀与防护研究所;讲师;沈阳110015;中国科学院金属腐蚀与防护研究所腐蚀科学开放实验室;中国科学院金属腐蚀与防护研究所腐蚀科学开放实验室;中国科学院金属腐蚀与防护研究所腐蚀科学开放实验室;中国科学院金属腐蚀与防护研究所腐蚀科学开放实验室
HYDROGEN ATTACK ON AUSTENITIC STEEL 304 UNDER HIGH TEMPERATURE AND HIGH PRESSURE
LI Xiaogang;CHEN Huan;YAO Zhiming;LI Jin;KE Wei Institute of Corresion and Protection of Metals; Academia Sinica; Shenyang lecturer;Institute of Corrosion and Protection of Metals;Academia Sinica; Shenyang 110015
引用本文:

李晓刚;陈华;姚治铭;李劲;柯伟. 304奥氏体钢的高温高压氢腐蚀[J]. 金属学报, 1993, 29(4): 73-76.
, , , , . HYDROGEN ATTACK ON AUSTENITIC STEEL 304 UNDER HIGH TEMPERATURE AND HIGH PRESSURE[J]. Acta Metall Sin, 1993, 29(4): 73-76.

全文: PDF(861 KB)  
摘要: 定氢分析和扫描电镜观察证实在450℃和5MPa氢气中服役20000h的304奥氏体钢发生了氢蚀透射电镜分析表明,氢蚀原因是Cr_(23)C_6碳化物存在实验和热力学分析都表明,长大期内的CH_4气泡周围Cr并未贫化
关键词 氢蚀304奥氏体钢CH_4气泡贫Cr区    
Abstract:Hydrogen attack on 304 austenitic stainless steel in the service for 2×10~4 h at450℃ under 5 MPa was detected to result from the occurrence of Cr_(23)C_6. The methane bub-bles were formed preferentially along grain boundaries and twin boundaries, and some ofthem in grains. Experimental results and thermodynamical analysis indicated that the Cr-de-pleted region around bubbles is not necessary condition in growth stage of bubbles.
Key wordshydrogen attack    austenitic stainless steel    methane bubbles    Cr-depleted region
收稿日期: 1993-04-18     
1 Inglis N P, Andrews W J. J Iron Steel Inst. 1933, 128: 383
2 Dodge S, Barnett F, Trans ASME, 1953; 75: 331
3 Nelson G A, Werkst Korros, 1963; 14: 65
4 Yacaman M J, Parthasarathy T A, Hirth J P. Metall Trans, 1984; 15A: 1485.
5 Dilewijns J, Houkaert Y. Proceedings of the International Conference on Interaction of Steels with Hydrogen in Petroleum Industry Pressure Vessel Service, Materials Properties Cocencil, Paris, 1989: 167
6 Kubaschewski O, Alcock C B. Metal Thermochemistry. Oxford: Pergamon, 1979: 300
7 Odette G R, Vagarali S S, Metall Trans, 1982; 13A: 299
8 Sundararajan G, Shewmon P G. Metall Trans, 1980; 11A: 509
9 Lopez H, Shewmon P G. Acta Metall. 1983; 31: 1945/
[1] 李慧 夏爽 周邦新 彭剑超. 镍基690合金中晶界碳化物析出的研究[J]. 金属学报, 2011, 47(7): 853-858.
[2] 李晓刚; 董超芳; 陈华; 褚武扬 . 热处理愈合不锈钢氢蚀裂纹实验研究[J]. 金属学报, 2001, 37(10): 1093-1096 .
[3] 苏铁健;罗兴宏;范存淦;李依依;陈晓;郭爱民. 1.25Cr-0.5Mo中温抗氢钢的回火析出相及其对抗氢蚀能力的影响[J]. 金属学报, 1998, 34(4): 393-399.
[4] 李晓刚;陈华;孟庆海;姚治铭;李劲;柯伟. 15CrMo钢氢蚀激活能测定及焊头氢蚀分析[J]. 金属学报, 1995, 31(22): 455-459.
[5] 郦建立;李晓刚;谢根栓;姚治铭;李劲;柯伟. 20G和2.25Cr—1Mo钢氢蚀后的疲劳性能[J]. 金属学报, 1995, 31(13): 26-30.