|
|
|
| FCC,BCC和HCP结构两相合金中置换型元素理想分配比和分配系数及晶胞比的确定 |
| 彭志方 任遥遥 |
| 武汉大学动力与机械学院;武汉430072 |
|
引用本文:
彭志方; 任遥遥 . FCC,BCC和HCP结构两相合金中置换型元素理想分配比和分配系数及晶胞比的确定[J]. 金属学报, 2001, 37(5): 472-476 .
[1] Dreshfield R L. Metall Trans, 1971; 2: 1341
[2] Dreshfield R L. Metall Trans, 1974; 5: 71
[3] Watanabe R, Kuno T. J Iron Steel Inst Jpn, 1975; 61:2274
(渡边力藏,九重常男,铁 钢,1975;61:2274)
[4] Harada H, Yamazaki M. J Iron Steel Inst Jpn, 1979; 65:1059
(原田 史,山崎道夫.铁 钢,1979;65:1059)
[5] Harada H, Yamazaki M, Koizumi Y, Sakuma N, FuruyaN, Kamiya H. High Temperature Alloys for Gas Turbines1982. Liege, Belgium, D Reidel Publishing Co, 1982: 721
[6] Harada H, Ohno K, Yamagata T, Yokokawa T, YamazakiM. In: Reichman S, Duhl D N, Maurer G, Antolivich S,Lund C eds, Superalloys 1988, Warrendale, PA: AIME,1988; 733
[7] Woo C S, Kim H T, Chun S S, Choi J. Scr Metall Mater,1993; 29: 1085
[8] Blavette D, Bostel A. Acta Metall, 1984; 32: 811
[9] Pollock T M, Argon A S. Acta Metall Mater, 1994; 42:1859
[10] Glatzel U. Glatzel U, Microstructure and Internal Strainsof Undeformed and Creep Deformed Samples of a Nickel-Base Superalloy. Berlin: Verlag Dr Koster, 1994: 10
[11] Schmidt R, Feller-Kniepmeier M. Scr Metall Mater, 1992;26: 1919
[12] Svetlov I L, Golovko B A, Epishin A I, Abalakin N P. ScrMetall Mater, 1992; 26: 1353
[13] Harf F H. Metall Trans, 1985; 16A: 993 |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
