金属学报  1996, Vol. 32 Issue (2): 191-196

论文 本期目录 | 过刊浏览 |

含共晶碳化物Fe-Cr-Mn合金在高温含硫气氛中的腐蚀研究

邢建东;汪文虎;高义民;王恩泽

西安交通大学

CORROSION OF Fe-Cr-Mn ALLOY CONTAINING EUTECTIC CARBIDE UNDER SULFUR ATMOSPHERE

XING Jiandong; WANG Wenhu; GAO Yimin; WANG Enzhe(Xi'an jiaotong University; Xi'an 710049)(Manuscript received 1995-04-17; in revised form 1995-11-13)

邢建东;汪文虎;高义民;王恩泽. 含共晶碳化物Fe-Cr-Mn合金在高温含硫气氛中的腐蚀研究[J]. 金属学报, 1996, 32(2): 191-196.
, , , . CORROSION OF Fe-Cr-Mn ALLOY CONTAINING EUTECTIC CARBIDE UNDER SULFUR ATMOSPHERE[J]. Acta Metall Sin, 1996, 32(2): 191-196.

摘要 参考文献 相关文章 Metrics 全文: PDF(523 KB)   摘要: 对含碳量为０．５０－２．６３％的Ｆｃ－Ｃｒ－Ｍｎ合金在８００℃下含硫混合气氛中进行腐蚀试验．用Ｘ射线物相分析法分析了腐蚀产物种类及其相对含量，现实测定了元素在腐蚀产物中的分布及试样亚表层共晶碳化物的腐蚀行为。结果表明：试验合金比高Ｎｉ耐热钢具有高的抗腐蚀性；合金的腐蚀行为受硫化及氧化腐蚀双重制约，因而使合金的腐蚀增重呈现峰值，随气氛氧化性增强，峰值向低碳方向移动；共晶碳化物具有比金属基体略好的抗腐蚀性。 关键词 ： 硫化腐蚀,  共晶碳化物,  耐热合金     Abstract：Corrosion test at 800℃ was carried out in mixed sulfur atmosphere for Fe-Cr-Mn alloys containing various contents of C ranging from 0.50 % to 2.63 %. The types and relative contents of corrosion scale were analyzed by X-ray diffraction. The distribution of elements and corrosion behaviour of eutectic carbide were examined. Results show that the corrosion resistance of the studied alloys is better than that of high Ni heat resisteant steel. The corrosion behaviour of alloys under tested conditions is controlled by the sulphuration and oxidation corrosion and so make a peak value of the mass gain of the alloys.With the strengthening of oxidational atmosphere the peak value is moved toward low carbon side. The eutectic carbide is more corrosion resistant than matrix.(Correspondent: XING Jiandong, professor, College of Mechanical Engineering, Xi'an Jiaotong University,Xi'an 710049) Key words： sulfur corrosion    eutectic carbide    heat resistant alloy 收稿日期: 1996-02-18      基金资助:国家教委博士学科点专项科研基金 服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 邢建东 汪文虎 高义民 王恩泽 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1996/V32/I2/191 1 XingJiandong,LuWenhua,WangXiaotong．In:LudemaKCed．,WearofMaterials,IntConfonwearofMaterials,NewYork:ASME,1983:452YanPing,ZhouQingde．In:LudemaKCed．,WearofMaterials,IntConfonWearofMaterials,Houston:ASME,1987:7423SuJunyi,JiaYuding．In:LudemaKCed．,WearofMaterials,IntConfonWearofMaterials,Houston:ASME,1987:6664邢建东,周庆德.摩擦磨损,1989(1):285赵学增,邢建东,周庆德.金属学报,1992;28:B2536张安峰,邢建东,陆文华.金属学报,1993;29:B263 [1] 梁凯, 姚志浩, 谢锡善, 姚凯俊, 董建新. 新型耐热合金SP2215组织与性能的关联性[J]. 金属学报, 2023, 59(6): 797-811. [2] 周雪峰, 方峰, 涂益友, 蒋建清, 徐辉霞, 朱旺龙. Al对M2高速钢凝固组织的影响*[J]. 金属学报, 2014, 50(7): 769-776. [3] 栾义坤 白云龙 宋男男 康秀红 李殿中. 离心铸造轧辊用高速钢的热处理[J]. 金属学报, 2009, 45(4): 470-475. [4] 胡正飞; 杨振国 . 长期高温时效F12耐热合金钢中碳化物形态和组分变化[J]. 金属学报, 2003, 39(2): 131-135 . [5] 李彦军;姜启川;赵宇光;何镇明. M2铸造高速钢的变质研究[J]. 金属学报, 1996, 32(3): 313-317. [6] 王树奇;姜启川;赵宇光;何镇明. 铸造Cr12模具钢共晶碳化物的粒化[J]. 金属学报, 1995, 31(23): 523-526. [7] 梁工英;邢建东. Fe-Cr-Mn耐热合金的热分析研究[J]. 金属学报, 1991, 27(6): 99-103. Viewed Full text Abstract Cited   Shared      Discussed