Please wait a minute...
金属学报  1986, Vol. 22 Issue (6): 84-150    
  论文 本期目录 | 过刊浏览 |
铸铁断口中的结晶台阶
赵坚
冶金部钢铁研究总院
AN OBSERVATION OF CRYSTALLINE STEPS IN CAST IRON
by ZHAO Jian (Central Iron and Steer Research Institute; Ministry of Metallurgical Industry; Beijing)
引用本文:

赵坚. 铸铁断口中的结晶台阶[J]. 金属学报, 1986, 22(6): 84-150.
. AN OBSERVATION OF CRYSTALLINE STEPS IN CAST IRON[J]. Acta Metall Sin, 1986, 22(6): 84-150.

全文: PDF(1367 KB)  
摘要: <正> 关于金属断口中的结晶台阶(即几何花样),文献报道以在铝合金中发现的最多,在镍基合金、钼单晶和钢的白点中也曾观察到。结晶台阶一般为梯田状,只有一个取向而具有较完整晶体学特征的很少见。 金属和合金在铸造或焊接凝固过程中,有时会产生一些疏松或缩孔。结晶台阶就是在这些疏松或缩孔的自由表面上形成的,是自由表面逐次长大的结果。在锻件中所发现的这种结晶台阶系属于未完全锻合而保留下来,特别是当有氧化膜存在时,出现这种情况的可能性更大。 本文介绍我们在研究铸铁轧辊断口时观察到的发育非常完美的结晶台阶花样。通过对这些花样的分析,有益于加深了解金属的凝固结晶过程。
Abstract:The pattern of crystalline steps on the fracture surface of cast iron were observed by SEM. It was found that the dendrites of cast iron grow not only along <100> directions but also along <110> directions. All the crystalline steps belong to {100} and {110} planes.
收稿日期: 1986-06-18     
1 Fellow, J.A., Metals Handbook, Vol. 9, 8th, 1974, ASM Metals, Park, Ohio, p. 44073.
2 周敬;常昕;郭可信,金属学报,14(1978) ,246.
3 Pittinato, G.F.; Kerlins. V.; Phillips, A.; Russo, M.A., SEM/TEM Fractography Handbook, Metals and Ceramics Information Center, Columbus, 1975, p. 56.
4 Engel-Klingele, Rasterele Ktrnenmikroskopische Untersuchungen von Metallschaeden, Gerling Institut fuer Schadenforschung und Schadenverhuetung Gmbh, Koln, 1974, p. 114.
5 1972, p. 222.
6 陈廉;徐永波;尹万全,金属学报,14(1978) ,251.
7 Verhoeven, J.D., Fundamentals of Physical Metallurgy. John Wiley & Sons, New York, 1975, p. 244.X
No related articles found!