Please wait a minute...
金属学报  1986, Vol. 22 Issue (4): 39-150    
  论文 本期目录 | 过刊浏览 |
β-Ti合金在高应变率下的绝热剪切现象
卢维娴;王礼立;陆在庆
中国科学技术大学;中国科学技术大学;合肥工业大学
ADIABATIC SHEARING PHENOMENON OF β-Ti ALLOY AT HIGH STRAIN RATE
by LU Weixian; WANG Lili (University of Science and Technology of China; Hefei); LU Zaiqing (Hefei University of Technology)
引用本文:

卢维娴;王礼立;陆在庆. β-Ti合金在高应变率下的绝热剪切现象[J]. 金属学报, 1986, 22(4): 39-150.
, , . ADIABATIC SHEARING PHENOMENON OF β-Ti ALLOY AT HIGH STRAIN RATE[J]. Acta Metall Sin, 1986, 22(4): 39-150.

全文: PDF(2162 KB)  
摘要: 对高应变率下变形的β-钛合金,用光学显微镜和扫描电镜观察研究了其绝热剪切带的显微组织。表明随变形的增加,依次有三种类型的绝热剪切带,即:形变带,具有细条状微晶结构和具有等轴微晶结构的转变带。在大形变量时,均沿绝热剪切带出现裂纹。在讨论绝热剪切判据时区分绝热剪切变形,绝热剪切断裂和热塑失稳是重要的。
Abstract:The microstructure of adiabatic shearing band for β-Ti alloy deformed at high strain rate was observed undermetallographic microscope and SEM. Three types of adiabatic shearing bands, namely, the deformation band, the transformation bands with fine stripped microcrystalline structure and with equiaxied very fine microcrystalline structure are found in sequence Under very large deformation, it may be cracked along the adiabatic shearing band With regard to discuss the criterion of adiabatic shearing, the distinction among the adiabatic shearing deformation, the adiabatic shearing fracture and the thermoplastic instability is important
收稿日期: 1986-04-18     
1 Bedford, A.J.; Wingrove, A.J.; Thompson, K. R. L., J. Aust. Inst. Met., 19 (1974) , 61.
2 Rogers, H.C., Ann. Rev. Mater. Sci., 9 (1979) , 283.
3 Meyers, M.A.; Murr, L.E., Shock Waves and High-Strain-Rate Phenomena in Metals, Plenum Press, New York, 1981.
4 Recht, R.F., J. Appl. Mech., 31 (1964) , 189.
5 Sulijoadikusumo, A.V.; Dillon, O.W.,Jr., Metallurgical Effects at High Strain Rates, Eds, Rohde, R. W,; Butcher, B.M.; Holland, J.R.; Karnes, C.H., Plenum Press, New York, 1973, p. 501.
6 Winter, R.E., Phitos. Mag., 31 (1975) , 765.
7 Winter, R.E.; Hutchings, I.M., Wear, 34 (1975) , 141.
8 Wulf, G. L., Int. J. Mech. Sci., 21 (1979) , 713.
9 王礼立;李远清;胡时胜;奉孝中,钛合金应力波铆接的可行性试验,中国科学技术大学研究报告,1983. (待发表).
10 王礼立;胡时胜,爆炸与冲击,5(1985) ,№1,9.
11 Culver, R.S., Metallugical Effects at High Strain Rates, Eds. Rohde, R.W.; Butcher, B.M.; Holland, J.R.; Karnes, C.H., Plenum Press, New York, 1973, p. 519.
12 Zenner, C.; Hollmon, J.H., J.Appl. Phys., 15 (1944) , 22.
No related articles found!