Please wait a minute...
金属学报  1986, Vol. 22 Issue (4): 26-31    
  论文 本期目录 | 过刊浏览 |
18Ni(350)马氏体时效钢时效结构分析
朱静;李荣;张丽萍
冶金工业部钢铁研究总院;冶金工业部钢铁研究总院;冶金工业部钢铁研究总院
AGING STRUCTURE ANALYSIS OF 18Ni(350) MARAGING STEEL
by ZHU Jing; LI Rong; ZHANG Liping (Central Iron and Steel Research Institute; Ministry of Metallurgical Industry; Beijing)
引用本文:

朱静;李荣;张丽萍. 18Ni(350)马氏体时效钢时效结构分析[J]. 金属学报, 1986, 22(4): 26-31.
, , . AGING STRUCTURE ANALYSIS OF 18Ni(350) MARAGING STEEL[J]. Acta Metall Sin, 1986, 22(4): 26-31.

全文: PDF(2231 KB)  
摘要: <正> 18Ni(350)马氏体时效钢是在18Ni(250)马氏体时效钢的基础上提高Co,Ti含量而形成的。对18Ni(250)钢的组织结构已经进行了较为系统的研究。提高Co,Ti含量使18Ni(350)钢时效后的强度明显高于18Ni(250)钢。关于18Ni(350)马氏体时效钢时效强化相的研究,已有很多报道,本文从时效结构的观察和分析入手,探讨18Ni(350)的强化机理并提出了合适的时效热处理制度。 试验用钢的化学成分(Wt-%)为:C0.007,Si0.005,Mn0.01,S0.005,P0.004,Co12.17,Ni17.99,Mo4.90,Ti1.31,A10.10,Fe余量。经双真空冶炼的钢锭,在
Abstract:The aging structure and deformation structure of the 18Ni(350) maraging steel have been studied The dominant age strengthening phases are Ni_3Mo and Ni_3Ti, or Ni_3Ti and reverse austenite in the specimens after heat treating at 820℃ for 1 h, A.C.+480℃ for 3 h A.C., or at 820℃ for lh, A C+510℃ for 3 h, A.C. respectively A brittle zone is found in the specimen of under aging at 820℃, 1 h, A.C. +400—450℃, 3 h, A. C., This is, perhaps, resulted from an ordered or short range ordered martensite Imatrix The proper regime of aging at 510℃ for 3 h, A C. is available on the basis of structural analysis and property examination.
收稿日期: 1986-04-18     
1 蔡其巩;朱静;何崇智,物理学报,(1974) ,№ 3. 178.
2 蔡其巩;朱静;何崇智;申辉旺;罗力更;宋为顺;于维乐,金属学报,13(1977) ,289.
3 朱静;赵英纬;潘天喜;蔡其巩,钢铁,16(1981) .№8,41.
4 李荣;于维乐;朱静;翟中生,钢铁,17(1982) ,№1,51.
5 何崇智,孟庆恩,钢铁,15(1980) ,№1,27.
6 Rack; H.J.; Kalish, D., Metall. Trans., 2 (1971) , 3011.
7 Tuffnell, G.W.; Cairns, R.L., ASM Trans. Q., 61 (1968) , 798.
8 叶恒强;邹本三,金属学报,15(1979) ,69.
9 Thomas, G.; Cheng, I-Lin; Mihalisin, J.R., ASM Trans. Q., 62 (1969) , 852.
10 Thomas, M., Mem. Sci. Rev. Metall., 68 (1971) .^
No related articles found!