Please wait a minute...
金属学报  1986, Vol. 22 Issue (1): 64-145    
  论文 本期目录 | 过刊浏览 |
铝基铸造复合材料的组织特征
纪士辰;李英敖;王国志
中国科学院金属研究所;中国科学院金属研究所;中国科学院金属研究所
STRUCTURAL FEATURE OF CAST Al-BASE COMPOSITE
JI Shichen; LI Ying'ao; WANG Guozhi (Institute of Metal Research; Academia Sinica; Shenyang)
引用本文:

纪士辰;李英敖;王国志. 铝基铸造复合材料的组织特征[J]. 金属学报, 1986, 22(1): 64-145.
, , . STRUCTURAL FEATURE OF CAST Al-BASE COMPOSITE[J]. Acta Metall Sin, 1986, 22(1): 64-145.

全文: PDF(2456 KB)  
摘要: 对用流变铸造方法制备的含石墨、SiC及SiO_2的铝基复合材料的金相组织、断口形态及磨损表面特征进行了观察和研究。复合料浆在凝固过程中,α固溶体,Si,CuAl_2及它们的共晶在外加粒子表面形核并长大。由于采用对复合料浆在浇注前迅速升温工艺,粒子短距离运动就可达到均匀分布。复合材料中外加粒子周围有一过渡层与基体连接,同时粒子表面又不同程度富集着活性元素Mg,因而粒子与基体之间结合良好,断裂及磨损后,粒子与基体之间无间隙,无裂纹。
Abstract:An observation was carried out on the feature of microstructure, fracture and worn surface of the Al-base composite prepared by rheocasting with graphite, SiC and SiO_2. The a solid solution, Si, CuAl_2 and allied eutectics are found to nucleate and to grow up along the surface of particulates added during solidification of the compslurry. The short-range movement of the particulates may distribute more uniformly in matrix owing to rapidly raising temperature of the composlurry before casting. Over the particulate, a transition layer connects with the matrix, and the active element Mg accumulates more or less. Thus, the firm bond is joined between the particulate and matrix, and it makes no more pore and crack on the microstructure of fractured or worn surface.
收稿日期: 1986-01-18     
1 Mehrabian, R.: Backman, D.G.: Murty, Y,Y.: ttong, S.: Levi, C.. 9th SDCE (Society of Die Casting Engineers) Int. Die Casting Exposition and Congress Paper, No. G. T. 77 083. June 6-9,1977, Mikuaukee, Wisconin.
2 Gibson. P. R.; Clegg, A.J.: Das, A.A.. Foundary Trade J., 155 (1982) , № 3232, 253-256, 262-267.
3 #12
4 Sato, A.: Mehrabian, R.. Metall. Trans., 7B (1976) , 443.
5 諏訪正輝;小室滕博;添野浩,日本金属学会誌,40 (1976) ,1074.
6 赵惠田;纪士辰;王国志;魏向东,摩擦磨损,2 (1984) ,17.
7 Rohatgi, P.K.: Murachi. N.: Sherry, H.R.; Chandrashekhar, R.. Mater. Sci. Eng., 26 (1976) , 115.
8 Pai, B. C.: Rohatgi, P.K.: Venkatesh, S., Wear, 30 (1974) , 117.
9 Badia. F.A.: Rohatgi, P.K., Trans. SAE. 78 (1969) , 1200.
10 铸造有色合金手册编写组,铸造有色合金手册,机械工业出版社,1978年,p.113.
11 纪士辰;王国志;赵惠田,机械工程材料,8(1984) ,№ 4,53.~
No related articles found!