金属学报  1985, Vol. 21 Issue (4): 128-138

论文 本期目录 | 过刊浏览 |

浸蚀定量法在不锈钢相分析上的应用

马翔

冶金工业部钢铁研究总院

DETERMINATION OF σ-OR M_(23)C_6-PHASE IN STAINLESS STEEL BY STEP POTENTIAL ETCHING CURRENT METHOD

MA Xiang Central Iron and Steel Research Institute;Ministry of Metallurgical Industry;Beijing

马翔. 浸蚀定量法在不锈钢相分析上的应用[J]. 金属学报, 1985, 21(4): 128-138.
. DETERMINATION OF σ-OR M_(23)C_6-PHASE IN STAINLESS STEEL BY STEP POTENTIAL ETCHING CURRENT METHOD[J]. Acta Metall Sin, 1985, 21(4): 128-138.

摘要 参考文献 相关文章 Metrics 全文: PDF(1493 KB)   摘要: 本文介绍一种新的相分析法——阶跃电位浸蚀电流法,并用它实现了化学难以分离的σ与M_(2■)C_6分别测定.方法简单快速,可以得到钢中析出物的含量、成分和形貌的情报.并且基于一种新的电极过程模型导出了定量分析公式,它已被实验证实. Abstract：A new method,namely,the step potential etching current mehtod for theindividual determination of σ-or M_(23)C_6-phase which is a difficult problem to sepa-rate each other by conventional chemical manner has been developed.This simpli-fied and rapid method easy to give certain information about the composition,con-tent and morphology of precipitated phases in the steel has been applied to stain-less steel samples.In addition,a formula for quantitative analysis was derived onthe basis of a new model of electrode process.The formula has been confirmedby experiments. 收稿日期: 1985-04-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 马翔 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1985/V21/I4/128 1 #12 2 #12 3 #12 4 #12 5 #12 6 #12 7 斋田义幸;筒井光范,日本金属学会志,42(1978) ,769． 8 马翔 徐澄宇;钢铁研究总院学报,4,(1984) ,№1,114． 9 马翔,分析化学,12(1984) ,№6,495． 10 马翔,分析化学,12(1984) ,№1,1． 11 黑泽文夫;田口勇;松本龙太郎,日本金属学会志,43(1979) ,1068． 12 Nicholson,R.S.;Shain,I.,Anal.Chem.,36(1964) ,706． No related articles found! Viewed Full text Abstract Cited   Shared      Discussed