金属学报  1982, Vol. 18 Issue (4): 501-506

论文 本期目录 | 过刊浏览 |

二辊穿轧时变形区的数学方程式

陈惠波

太原重型机器厂

A MATHEMATICAL TREATMENT ON DEFORMATION ZONE IN TWO-ROLLS PIERCING

Chen Huibo (Taiyuan Heavy Machinery Plant) (Manuscript received 10 October; 1981)

陈惠波. 二辊穿轧时变形区的数学方程式[J]. 金属学报, 1982, 18(4): 501-506.
. A MATHEMATICAL TREATMENT ON DEFORMATION ZONE IN TWO-ROLLS PIERCING[J]. Acta Metall Sin, 1982, 18(4): 501-506.

摘要 参考文献 相关文章 Metrics 全文: PDF(349 KB)   摘要: <正> 长期以来,Mannesmann二辊穿孔机都用桶形轧辊,它的子午线是折直线,所以叫折线轧辊似较确切,虽然各国都在改进辊形,特别是大角度穿孔时的辊形,但从数学上来看,还是折(直)线形,无本质上的变化。 为了发展我国钢管制造技术,我们从1975年起研究折线轧辊下的变形区,给出它的曲面方程式和子午线方程式,证明了变形区是非线性的。 苏联乌克兰科学院EMeЛbяHeкO院士和ΦoMичeB研究折线轧辊下的轧辊开度 Abstract：A mathematical equation described the metal deformation zone in the piercing process on Mannesmann two rolls mill has been derived. It was evidenced that the rolling-pass of the Mannesmann rolls is non-linear and the non-linear barrel-shaped rolls are unfavourable for further increasing the production capacity with high effeciency and improving the tube quality. Therefore, they should be replaced by a roller configuration with cross or compound curve. The confirmation of the aforementioned results was achieved by industrial practice. 收稿日期: 1982-04-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 陈惠波 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1982/V18/I4/501 1 #12 2 #12屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯 No related articles found! Viewed Full text Abstract Cited   Shared      Discussed