Please wait a minute...
金属学报  1981, Vol. 17 Issue (2): 213-220    
  论文 本期目录 | 过刊浏览 |
倾斜焊接接头承载能力的研究
陈亮山
中国科学院金属研究所
STUDY OF LOADING CAPACITY OF MITRE WELDING JOINT
Chen Liangshan (Institute of Metal Research; Academia Sinica)
引用本文:

陈亮山. 倾斜焊接接头承载能力的研究[J]. 金属学报, 1981, 17(2): 213-220.
. STUDY OF LOADING CAPACITY OF MITRE WELDING JOINT[J]. Acta Metall Sin, 1981, 17(2): 213-220.

全文: PDF(564 KB)  
摘要: 本文根据几种倾斜焊接接头单轴拉伸试验结果,提出了在复杂应力状态下焊接接头承载能力的新计算法,并推导出计算焊接接头强度的经验公式: σ_(eq)=((σ_w~2)+(ewτ_w~2)~(1/2)· 经验公式是根据塑性失稳和现代断裂力学为理论基础提出的。同时指出,倾斜焊接接头总是比垂直焊接接头有较高承载能力的传统概念及计算方法是不完整的。
Abstract:On the basis of the uniaxis tensile tests of several mitre welding joints, a mathematical treatment for calculating loading capacity of the butt welding joints under complex stress condition was worked out and an empirical formula is given as:σ_(eq)=(σ_w~2+σ_wτ_w~2)~(1/2) The theoretical consideration of this formula is easily approached by the plasticity collapse and the fracture mechanics. It is also clarified that the conventional understanding about the loading capacity in mitre welding joint being always senior to that in perpendicular one, and its related calculation, as well, seem to be not entirely correct.
收稿日期: 1981-02-18     
[1] 金属研究所高压容器研究组,金属学报,12(1976) ,37.
[2] Satoh, K. and Toyoda, M., Welding J., 54 (1975) , № 9, 311-s.
[3] #12
[4] #12
[5] Sih, G. C. and Macdonald, B., Eng, Fract. Mech., 6(1974) , 361.H
No related articles found!