Please wait a minute...
金属学报  1959, Vol. 4 Issue (4): 287-296    
  论文 本期目录 | 过刊浏览 |
沸腾钢锭在浇铸及凝固过程中的氧化
王清辉;张顺南;董林嵩;师昌绪
中国科学院金属研究所;中国科学院金属研究所;中国科学院金属研究所;中国科学院金属研究所
OXIDATION OF RIMMING STEEL INGOT DURING TEEMING AND SOLIDIFICATION
WANG CHING-HUEI;CHANG SHUN-NAN;TUNG LING-SUNG;SHIH CHANG-HSU Institute of Metal Research; Academia Sinica
引用本文:

王清辉;张顺南;董林嵩;师昌绪. 沸腾钢锭在浇铸及凝固过程中的氧化[J]. 金属学报, 1959, 4(4): 287-296.
, , , . OXIDATION OF RIMMING STEEL INGOT DURING TEEMING AND SOLIDIFICATION[J]. Acta Metall Sin, 1959, 4(4): 287-296.

全文: PDF(1011 KB)  
摘要: 本文定量地研究了在不同性质的气氛下凝固的小沸腾钢锭遭受氧化的程度;并研究了在大气中和隔绝大气凝固的大型沸腾钢锭,在浇铸和模内沸腾过程中的沸腾情况,母液成分的变化及钢坏中杂质含量和偏析等。结果指出:在浇铸和模内沸腾过程中,钢液的二次氧化对沸腾起着主要作用;用限制锭模内钢液与大气接触的办法来控制沸腾,可以减轻钢锭的偏析。
Abstract:It is still a controversy that where oxygen comes from for the rimming action during solidi-fation of the rimmed steel ingot. This investigation was carried out in order to see the oxidizingaction of different atmospheres such as oxygen, nitrogen, water gas and air. Experimentswere also conducted on large rimmed steel ingots to control the rimming action by control ofadmission of air to the mold during solidification. Analyses of steel bath, segregation and dis-tribution of impurities in the ingot were made. It is concluded that secondary oxidation duringteeming and rimming is the main source of oxygen. Segregation of steel ingot may be reducedby the control of rimming action with the aid of regulation of air admission to the rimmingbath in the mold.
收稿日期: 1959-04-18     
[1] 王清辉等,压力对沸腾钢锭结构和偏析的影响.
[2] 吕湘提、胡文淦、甘克先,金属学报,二卷二期(1957) ,141.
[3] #12.
[4] J. Chipman. A. Hayes, A.I.M.E. 135 (1939) 85.
[5] P. M. Macnair, J.I.S.I. 160 (1948) , 151.
[6] #12.
[7] #12.
[8] #12.
[9] #12.
[10] #12.
[11] #12.
[12] #12.
[13] #12.
[14] J. S. vatchagandhy. G. P. Contractor, J.I.S.I. 152 (No. 2) (1945) , 509.
[15] 李薰等,金属学报,一卷一期(1956) ,15.
[16] T. Swinden, J.I.S.I. 146 (No. 2) (1942) , 345.
No related articles found!