金属学报  1957, Vol. 2 Issue (2): 153-168

论文 本期目录 | 过刊浏览 |

沸腾钢钢锭中夹杂物的分布

师昌绪;李静媛

中国科学院金属研究所;中国科学院金属研究所

DISTRIBUTION OF NON-METALLIC INCLUSIONS IN RIMMING STEEL INGOTS

SHIH CHANG-HSU;LEE CHIN-YUAN Institute of Metal Research; Academia Sinica

师昌绪;李静媛. 沸腾钢钢锭中夹杂物的分布[J]. 金属学报, 1957, 2(2): 153-168.
, . DISTRIBUTION OF NON-METALLIC INCLUSIONS IN RIMMING STEEL INGOTS[J]. Acta Metall Sin, 1957, 2(2): 153-168.

摘要 参考文献 相关文章 Metrics 全文: PDF(6920 KB)   摘要: 本文根据鞍山钢铁公司沸腾钢的四种浇铸方案(一般,造渣,模口加盖,模口加盖铸完压板),在非金属夹杂物的类型和分布方面进行了金相的观察。结果指出,各种类型夹杂物都有它分布的特点。在这四种方案所浇铸的钢锭中基本上是一致的;惟在上述后三种操作方法所铸出的钢锭的上部发现沿晶粒间界析出的网状氧化物,可能影响钢锭的质量。文中就各种夹杂物的分布的特点进行了讨论,并对沸腾铜的生产提出了几点建议。 Abstract：The distribution and types of non-metallic inclusions in rimming steel ingotsobtained by four different teeming practices have been investigated microscopically.The different teeming practices were: (1) ordinary, (2) slag covering, (3) coveredtop of ingot mould during teeming, and (4) same as in (3), but immediately afterthe completion of teeming, a heavy steel plate was placed on top of the moltenmetal. Quantitative results indicate that the types and distribution of non-metallicinclusions in these ingots are basically similar, except that oxide networks alonggrain boundaries were observed in ingots obtained by using the last three teemingpractices. Several interesting phenomena are revealed and discussed. Suggestionsto improve the teeming practice are given. 收稿日期: 1957-02-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 师昌绪 李静媛 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1957/V2/I2/153 [1] 吕湘提,胡文淦,甘克先,改善沸腾钢钢锭质量的研究,本期金属学报. [2] Hultgren, A. and Phragmen G., Trans. AIME, 133 (1939) , 133． [3] Swinden, T., Jour. Iron and steel Inst., Spec. Rop., No. 27, 17． [4] (1955) , 382--413． [5] Washburn, T. S. and Nead, J. H., Trans. AIME. 125 (1937) , 378． [6] (1953) ,吴昌衡,李静媛,李代钟,徐思盛译,钢中夹杂物的金相鉴定,(1956) ,科学出版社. [7] ASM Metals Handbook(1948) , 445--452． [8] 庄育智,吴昌衡,金属学报,第一卷第二期,1956年6月,155． [9] 李董,陈继志等,金属学报,第一卷第四期,1956年12月. [10] Whiteley, J. H., 7th Rop. on Steel Ingots, Inst. of Iron and Steel Spec. Rep., No. 16(1937) , 23． [11] Sims, C. H., Proc. Electric Furn. Steel, 10 (1952) , 152． [12] Dickson, J. H. S. Jour. Iron and Steel Inst., 113 (1926) , 177． [13] Herty, C. H. and Fitterer, G. R., Trans. Am. Soc. Steel Treat., 15 (1929) , 569． [14] 赵淑熙,李静媛 未发表的报告,1956年12月. [15] Rait, J. R. and Pinder, H. W, Jour. of Iron and Steel Inst., 154 (1946) , 371． [16] Morton, A. L. and Carter, P. T., Jour. of Scot. Iron and Steel Inst., 59 (1951-52) , 96． [17] Hayes, A. and Chipman, J., Trans. AIME, 135 (1939) , 85． [18] (1950) , [19] (1950) , № 4, 311． [20] A training course from United States Steel Corporation. No related articles found! Viewed Full text Abstract Cited   Shared      Discussed