BEHAVIOUR AND MECHANISM OF STRAIN HARDENING FOR DUAL PHASE STEEL DP1180 UNDER HIGH STRAIN RATE DEFORMATION
Received date: 2012-06-20
Revised date: 2012-07-10
Online published: 2012-10-11
Supported by
Supported by High Technology Research and Development Program of China (No.2009AA03Z518) and Basic Theory Research Fund of Engineering Research Institute of USTB (No.YJ2010–006)
Strain hardening behaviour and mechanism of a cold–rolled dual phase steel DP1180 under quasi–static tensile condition at a strain rate of 0.001 s−1 by electronic universal testing machine, and dynamic tensile condition at strain rates of 500 and 1750 s−1 by split Hopkinson tensile bar (SHTB) apparatus were systematically studied. According to the modified Swift true strain–stress model, the experimental data was regressed by using nonlinear fitting method, and strain hardening exponent in the modified Swift model was calculated by a modified Crussard–Jaoul method. The results revealed that there are two stage strain hardening characteristics of DP1180 steel at the strain rate range of 0.001—1750 s−1, the strain hardening ability of the stage I was enhanced with increase of strain rate, while the strain hardening ability of the stage II was weakened, and the transition strain was decreased. The ferrite near the martensite regions formed cell blocks with dislocation structures, with a size of 90 nm, due to the limit of deformation compatibility, and the existence of geometrically necessary boundary (GNB) made DP1180 steel not instantly damaged under deformation at high strain rates. In addition, the adiabatic temperature rise of ΔT=103 ℃ made martensite easy to have plastic deformation at a strain rate of 1750 s−1.
DAI Qifeng SONG Renbo FAN Wuyan GUO Zhifei GUAN Xiaoxia . BEHAVIOUR AND MECHANISM OF STRAIN HARDENING FOR DUAL PHASE STEEL DP1180 UNDER HIGH STRAIN RATE DEFORMATION[J]. Acta Metall Sin, 2012 , 48(10) : 1160 -1165 . DOI: 10.3724/SP.J.1037.2012.00364
[1] Chongthairungruang B, Uthaisangsuk V, Suranuntchai S, Jirathearanat S. Mater Des, 2012; 39: 318
[2] Giri S K, Bhattacharjee D. J Mater Eng Perform, 2012; 21: 988
[3] Pouranvari M. Mater Sci Eng, 2012; A546: 129
[4] Queiroz R R U, Cunha F G G, Gonzalez B M. Mater Sci Eng, 2012; A543: 84
[5] Ahmad E, Manzoor T, Ziai M M A, Hussain N. J Mater Eng Perform, 2012; 21: 382
[6] Nouri A, Saghafian H, Kheirandish S. Int J Mater Res, 2010; 101: 1286
[7] Calcagnotto M, Adachi Y, Ponge D, Raabe D. Acta Mater, 2011; 59: 658
[8] Sun X, Choi K S, Soulami A, Liu W N, Khaleel M A. Mater Sci Eng, 2009; A526: 140
[9] Huh H, Kang W J, Han S S. Exp Mech, 2002; 42(1): 8
[10] Deng Z J, Liu J, Wang H, Li P H. J Mater Therm Treat, 2011; 32: 111
(邓照军, 刘静, 王辉, 李平和. 材料热处理学报, 2011; 32: 111)
[11] Kamp A, Celotto S, Hanlon D N. Mater Sci Eng, 2012; A538: 35
[12] Colla V, De Sanctis M, Dimatteo A, Lovicu G, Solina A, Valentini R. Metall Mater Trans, 2009; 40A: 2557
[13] Sung J H, Kim J H, Wagoner R H. Int J Plast, 2010; 26: 1746
[14] Beynon N D, Jones T B, Fourlaris G. Mater Sci Technol, 2005; 21: 103
[15] Kuang S, Kang Y L, Yu H, Liu R D. J Mater Eng, 2009; (2): 11
(邝霜, 康永林, 于浩, 刘仁东. 材料工程, 2009; (2): 11)
[16] Ramos L F, Matlock D K, Krauss G. Metall Trans, 1979; 10A: 259
[17] Samuel F H. Mater Sci Eng, 1987; 92: L1
[18] Jha B K, Avtar R, Dwivedi V S, Ramaswamy V. J Mater Sci Lett, 1987; 6: 891
[19] Swift H W. J Mech Phys Solids, 1952; (1): 1
[20] Das D, Chattopadhyay P P. J Mater Sci, 2009; 44: 2957
[21] Yu Y N. Fundamentals of Materials Science. Beijing: High Education Press, 2006: 566
(余永宁. 材料科学基础. 北京: 高等教育出版社, 2006: 566)
[22] Winther G, Jensen D J, Hansen N. Acta Mater, 1997; 45: 5059
[23] Sha G Y, Sun X G, Liu T, Zhu Y H, Feng X G. Chin J Mater Res, 2010; 24: 567
(沙桂英, 孙晓光, 刘腾, 朱宇宏, 冯晓刚. 材料研究学报, 2010; 24: 567)
[24] Hughes D A, Hansen N, Bammann D J. Scr Mater, 2003; 48: 147
[25] Wu Z Q, Tang Z Y, Li H Y, Zhang H D. Acta Metall Sin, 2012; 48: 593
(吴志强, 唐正友, 李华英, 张海东. 金属学报, 2012; 48: 593)
[26] Wu C C, Wang S H, Chen C Y, Yang J R, Chiu P K, Fang J. Scr Mater, 2007; 56: 717
/
| 〈 |
|
〉 |
