论文

CONVECTION EFFECTS AND BANDING STRUCTURE FORMATION MECHANISM DURING DIRECTIONAL SOLIDIFICATION OF PERITECTIC ALLOYS
II. Theoretical Analysis

  • LUO Liang-Shun ,
  • FU Heng-Zhi ,
  • ZHANG Yu-Min ,
  • LI Xin-Zhong ,
  • SU Pan-Qiang ,
  • GUO Jing-Jie
Expand
  • 1. School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001
    2. National Key Laboratory of Science and Technology on Advanced Composites in Special Environment, Harbin Institute
    of Technology, Harbin 150001

Received date: 2010-09-19

  Revised date: 2010-11-24

  Online published: 2011-03-11

Supported by

Supported by National Natural Science Foundation of China (Nos.50901025 and 50771041) and National Science Foundation for Post–doctoral Scientists of China (No.20090450840)

Abstract

The axial macrosegregation and relevant microstructure evolution of Fe–Ni peritectic alloys directionally solidified under different convection strength were discussed using pure diffusion model, boundary layer convection model and the Scheil equation. Comparing with the experiments of Fe–Ni alloys conducted in resistance heating and induction heatinBridgman system, it was found that the predictions of boundary layer convection model areed well with the experimental results of induction heating drectional solidification when the convection strength parameters lies in the region 1.7<λ≤2, indicating that the model can be used to predict the axial macrosegregation and microstructures evolution of peritectic alloys.

Cite this article

LUO Liang-Shun , FU Heng-Zhi , ZHANG Yu-Min , LI Xin-Zhong , SU Pan-Qiang , GUO Jing-Jie . CONVECTION EFFECTS AND BANDING STRUCTURE FORMATION MECHANISM DURING DIRECTIONAL SOLIDIFICATION OF PERITECTIC ALLOYS
II. Theoretical Analysis[J]. Acta Metall Sin, 2011
, 47(3) : 284 -290 . DOI: 10.3724/SP.J.1037.2010.00486

References

[1] Kerr H W, Kurz W. Int Mater Rev, 1996; 41: 129

[2] Boettinger W J, Coriell S R, Greer A L, Karma A, Kurz W, Rappaz M, Trivedi R. Acta Mater, 2000; 48: 43

[3] Asta M, Beckermann C, Karma A, Kurz W, Napolitano R, Plapp M, Purdy G, Rappaz M, Trivedi R. Acta Mater, 2009; 57: 941

[4] Trivedi R, Shin J H. Mater Sci Eng, 2005; A413: 288

[5] Trivedi R. Metall Trans, 1995; 26A: 1583

[6] Kurz W, Trivedi R. Metall Trans, 1996; 27A: 625

[7] Mazumder P, Trivedi R, Karma A. Metall Trans, 2000; 31A: 1233

[8] Park J S, Trivedi R. J Crys Growth, 1998; 187: 511

[9] Liu S, Trivedi R. Metall Trans, 2006; 37A: 3293

[10] Trivedi R, Park J S. J Crys Growth, 2002; 235: 572

[11] Dobler S, Lo T S, Plapp M, Karma A, Kurz W. Acta Mater, 2004; 52: 2795

[12] Lo T S, Dobler S, Plapp M, Karma A, Kurz W. Acta Mater, 2003; 51: 599

[13] Su Y Q, Luo L S, Li X Z, Guo J J, Yang H M, Fu H Z. Appl Phys Lett, 2006; 89: 031918

[14] Luo L S, Su Y Q, Guo J J, Li X Z, Yang H M, Fu H Z. Appl Phys Lett, 2008; 92: 061903

[15] Luo L S, Zhang Y M, Su Y Q, Wang X, Guo J J, Fu H Z. Acta Metall Sin, 2010; 47: 275

(骆良顺, 张宇民, 苏彦庆, 王新, 郭景杰, 傅恒志. 金属学报, 2010; 47: 275)

[16] Karma A, Rappel W J, Fuh B C, Trivedi R. Metall Trans, 1998; 29A: 1457

[17] Scheil E. Z Metallkd, 1942; 34: 70

[18] Luo L S. PhD Thesis, Harbin Institute of Technology, 2008

(骆良顺. 哈尔滨工业大学博士学位论文, 2008)

[19] Li S M, Liu L, Li X L, Fu H Z. Acta Metall Sin, 2004; 40:20

(李双明, 刘林, 李晓历, 傅恒志. 金属学报, 2004; 40: 20)
Outlines

/